Questions

Zooming in ACR is perfect, so why is it so cumbersome in Bridge, it is same-author program package, and it is in Bridge that I need the perfect zoom function, as thát is where the selection process happen....?In ACR, You can in the settings set the default zooming to for instance 400%, which is perfect in terms of checking whether the image is actually 100% sharp, NOT THE LEAST because it zoom in exactly where You click, however in Bridge, it zoom to 100 percent, somewhere in the vicinity of where You clicked, and it is for one thing VERY cumbersome to drag the image - bit for bit - to the eye that You for instance want to check, if it didn't zoom in exactly where You clicked (which it doesn't do 8 out of 10 times), and likewise it is also quite difficult to get it to the 400%, or whatever level You want to get to, as it more or less zoom in and out frantically (exactly this may be a matter of mouse sensitivity though, however, unlike ACR, it is not possble to preset a zoomlevel in the

The "maximize current panel" shortcut (` key) doesn't work on QWERTZ (German) keyboards and likely on most non-English keyboards as well.Those who don't have an English keyboard with version 13 lose Tab to Hide and get locked out of the Subwindow magnification feature too (I saw no other way to run this command). The issue, obviously, could get solved with editable keyboard shortcuts: A feature Bridge users have been asking for, since day one.I already posted this as a comment in another thread, but I thought I should give it a thread on its own. Maybe someone from the Bridge Team reads this feedback right after the major release.

Hi,  I can't seem to get Camera Raw to work with my new MacBook Pro. The internet has told me to try different things, but I might be too big of an idiot to understand what to do. I have attached screenshots of why I can't change settings or delete a file I don't seem to have. Any help would be much appreciated.

SorryIt started working - No need for assistance

The folders are just showing as the folder icon which makes it difficult to gauge at a glance which folders are empty.Bridge ↑vsFile explorer ↓(yes they're not the same location).

Not getting DDS previews. Tried copying Intel Textureworks and Nvdia DDS plugins from photoshop to Bridge but still no previews.Is this the state of things?  Or am i missing something. Thx.

I was prompted to update my Adobe Bridge, and upon launching the updated software, I was met with constant crashing. I can't even scroll more than two lines into a folder before the program closes.   For reference, here are my system specs: Windows 10 AMD Ryzen 5 3600 16GB of RAM (2x8GB) DDR4-3600 CL16 Zotac RTX 3060 12GB OC Adata Swordfish 250GB M.2-2280 NVME SSD (This is the drive with the files I'm attempting to access)   If someone knows what to do about this, it would be greatly appreciated if you could help me out, as this program is literally unusable at this point.       {Title edited by Moderator}

I can't believe Adobe is dropping support for Bridge 12 in Sequoia. It's still the most stable version of Bridge in my opinion. We had all sorts of issues with Bridge 14+ on an M2 Mac mini. There were weird thumbnail caching issues with external usb hard drives. They would constantly reload and take forever to reload every time you launched the app. Labeling and tagging images would sometimes revert for no reason. Any chance you could just revert the changes and go back to Bridge 12 when everything worked? If not, I'm afraid we're stuck on Sonoma for the forseeable future. These newer Bridge updates have just gotten worse and worse.

I have several folders of family photos nested like this: 2025     Jan          01          20     Feb          01          132024     Jan          01          20     Feb          01          13 Inside each folder I have certain images tagged with the red label. Is there an action or a batch process that can copy all of the red images from the nested folders into one folder on my desktop?

I just installed Bridge 2025 on my new Mac Studio. I got an error message "GPU Rendering is Disabled" and something about Photo Downloader not working. Has something to do with Adobe not bothering to update Bridge for Apple Silicon processors (after three years?). How will GPU Rendering being disabled affect my work experience with Bridge? What's not goin to work? Thanks.

When I import a folder to Bridge from an external harddrive it is empty when I open it. Then I cannot delete it or replace it. I have restarted and reinstalled Bridge but nothing helps. How to solve it? / Johan

Is there a way to just type in a file number in Adobe Bridge to select it? It's tedious and time-consuming having to hunt through hundreds of images when a quick entry could take me directly to the image I want. 

hello,Sometimes after opening and editing a jpg in camera raw and pressing "done" the changes are not saved and do not appear anywhere. Why does this happen?I usually use bridge for masking and changing color.

 I reently installed PS and Bridge 2025. Bridge will not open, When I try I get a message "Program quit because on an unknown error." I am running Sequoia 15.1.1. Sugestions?

Upgraded to the new 2019 Versions of the CC apps today, but I am unable to sync the color settings across apps.  Also, the color setting do not stick within the individual apps. I update the universal color settings in bridge and apply, if I quit and relaunch bridge the color settings indicate they are not synced.If I open Photoshop, Illustrator, InDesign the color settings are indeed not synced.  I can manually update the settings in each app, but as soon as I quit, and relaunch, each app, the color settings have reverted back to their 'defaults'.I have deleted all CC applications and data, run the CC Cleaner app, reinstalled CC from scratch and the color setting issue still remains.This behavior isn't happening with the 2018 versions of the apps.  I can set a global color setting in Bridge and it will apply to all apps.The apps maintain the color setting between quit and relaunch.Mainly just curious if anyone else has seen this behavior?

When I open Bridge i'm getting a blank screen with black boxes. I can use the dropdowns but any dialogue boxes that appear are blacked out. I have tried reinstalling the app, emptying the caches and reseting the prefs, I think, as it's difficult to do when i can't see what I'm selecting.

I'm new to javascript with Bridge.I want to pass a filepath to Bridge 2025 using applescript and have Bridge reveal the file and also change the file's star ratings. The filepath is in Numbers and I pass it in a string variable to Bridge. If I use the open command, it works but there's a long delay of about 5 seconds before control is returned back to the ApppleScript -- too painful for many files to be run through quickly this way.When I try to save the code below, I get an "Expected end of line" with javascript highlighted after "do". In Bridge's startup script folder, I put the code shown below as recommended by AI.This *prevents* the function "selectFile" from running until Applescript sends the request to run that function with the parameter "filepath" (according to AI). For ease of finding my script, I'd like to put this script in the StartupScript folder if I can keep it from running at startup, but putting it there isn't essential if it complicates things too much. If

I recently switched from an M1 iMac to a 2019 Intel based Macbook Pro (Running Sonoma 14.5).Ever since the switch, when I open Bridge it creates a large number of cache_.dat files on the external drive where my photos are located. In the Settings there is a cache location instruction which is set to  HD / My username / Libraries / Caches / Adobe Bridge / Cache / v36, but there is no Adobe Bridge folder there (even when viewing hidden files). Instead it seems to be just putting the files on the external drive. There were several thousand files that I had to remove. These files don't gp away when I close the app and don't go away when I tell it to purge cache files.i have uninstalled and reinstalled Bridge and it made no difference. Any thoughts?Thanks!Phil

Dear community, for quite some time now a real weird behaviour of the magnifying glass is annoying me both in Bridge 2024 and 2025. When viewing small images (i.e. 640x400px) it shows a strange facetted-effect.I used Bridge CS6 before - there the magnifying-glass-window was always filled completely with the selected magnification as shown below.Is that a bug in 2024/2025? Do I have some presets wrong? What can be done to have the correct rendering?It's reeeeally annoying when using it for detail research on several images. (CS6 was running on macOS El Capitan. Now I am using Bridge 2024 with macOS Monterey 12.7.6 and also tried Bridge 2025 with a clean install of macOS Sonoma 14.7.2. - Unfortunately both are showing the same effect.) Bridge CS6: Bridge 2024 and 2025:

Using Bridge 15.0.4.534, although this was also the case in the previous version, before i updated just now. WHAT I'M SEEINGI have a folder containing many nested folders, most of which contain image files.In the sidebar, i have the top level folder selected, and below that, i have expanded FILE TYPE.The list of filtering checkboxes under File Type show just the contents of the currently selected folder. GOALHave the Filter > File Type feature return results from all sub-folders Not sure if the above would constitute less of a filter and more of a search.  But i was assuming there'd be some way in Bridge to show me everything of X file type within the current folder PLUS sub-folders. 

I'm experimenting with bridge as a potential tagging alternative to what we are already using. The big problem I'm facing is we cannot tag by changing the file name due to our need to edit with the clips while others on our team tag them. We currently tag in another software using what is essentially the description and keywords. If I could add the clip description to the panel where we could edit it just as if we were editing the clip title, that would pretty much solve the only big issue switching software would cause. I have absolutely zero idea of how to write scripts for this, so if anyone has one that would be a tremendous help!

When I installed the latest version of Bridge, I mistakenly denied access to media on my computer. Now Bridge is essentially useless, as it cannot see any files at all. How can I correct this and edit the permissions? I tried uninstalling Bridge, and when prompted, chose to discard preferences. On reinstalling, I still cannot see files in the viewer window, so it would seem that the permissions choices carried over.  Any suggestions on how to fix this?

Hye community, I wrote custom XMP metadata to add on images and medias. It works like a charm on Bridge 2022 but a bug appears on UI n 2023 version(update the day of the demo to my partners... fate...). The views are ok on 'Information panel' (Files > Informations) but doens't works on 'Metadata panel', as shown on the image linked : Image of the bug on Bridge 2023  A read the documentation another time, line by line and I've tryed many ways to rewrite XML files that describes custom XMP schema and view but nothing works. This time, I think there's a bug.All the files could be found on the github repository in Nemateria extension folderThank you community for yours help.

As a photographer I have been using Bridge for over a decade. One of the most important ways I use it is to create PDF documents of low res (but good quality) images to show clients as contact sheets, often with one image per page. I found this to be a quick easy way to create a high res or low res PDF that can be emailed. Recently with the new Bridge updates, the PDF sizes have become exponentially bigger - and therefore not possible to email. I never used to have to resize every image as the Output panel was very good at compressing and doing this for me and creating a usable file size. It is even creating large file sizes from small LR images. I don't know what has happened or if there is any solution to this, but my workflow is now incredibly slow as I try to compress and optimize PDFs in Adobe Acrobat which also is very glitchy and sometimes doesn't work at all. I'm now doing more work to try and do something I have done in Bridge for years and it's driving me crazy. I have a

Bridge is creating multiple copies of photos when I download from my camera.  I'm using a Z7 and running on Windows 10 - Bridge is up to date.  This just started a few days ago.  When I use the Photo Downloader it creates two copies of each photo from my camera - I then have to delete every other one before I start actually downloading.  Anyone have any ideas??