Questions

Bridge 2023 (version 13.0.0.562) not generating thumbnails or previews for files larger than 1GB even though I have the threshold set at 5GB. After purging the cache and restarting it still doesn't work.

For a couple of weeks, while browsing the jpg files in a folder of mine, I'm noticing that some jpg files are no longer readable and can no longer be used with any software.I verified that the problem is getting bigger and I also tried to move the folder to another hard drive because I assumed that the hard drive was faulty.I tried to uninstall the new version and installed a version 13.1 that had not given me any problems.I scanned my system and there are no viruses, I also performed a scan to correct the hard drive sectors.Now I don't know what to do anymore.Does this happen to anyone of you?

can’t label and tag raw files (NEF)  inside Adobe bridge (and folders) after update to latest Mac os 15.0for example" commad+8 does not work on a (raw/NEF) file only on the folders inside adobe bridge is working but not on the files when opening folders...also it is not possible to label and tag through menu bar..any suggestions? I did uninstall/instal - command/option/shift to reset Bridge no succes so farA.J.P.

Is anyone using the new iCloud drive? I started only recently and found it working quite well for my tasks. But unfortunately it does not show up in the Bridge, which makes it a bit impractical once you have created a few folders. Especially, when you, like me, use the bridge all the time. So I would appreciate if anyone has any information if this is kind of an issue that is already discussed or that might be changed in the future. Or is there a way to solve it? And last but not least, is it an Apple issue or an Adobe one?

I just purchased a new 2021 iMac; running Ventura 13.0. I've installed the latest version of Adobe Bridge, and the thumbnails from my desktop (folders and files) will not load, making the software essentially useless. The spinning pinwheel just goes on for literal hours. I've purged the cache, uninstalled and reinstalled, downgraded to the previous version - all to no avail. Anyone have any ideas for a possible fix?   

M1 Macbook Pro, 13.6.7Bridge 14.1.1Seconds after selecting 'quit' nothing happens.On the Bridge Screen in small print it reads: ‘Generating thumbnails… Generating Previews…’Show the Force-Quit menu and Bridge is listed as 'not responding'. Previous versions of Bridge have been substituted—same result. 

Liebe Community, seit einigen Tagen passsiert es bereits nach mehreren Klicks, dass Adobe Bridge abstürzt.Diese Abstürze hab ich derzeit nur bei Bridge. (Nutze nur das Foto Abo) Hier der Fehlerbericht, falls hilfreich.Fehlerbericht/Error Message  Bitte um Hilfe, Danke! Liebe GrüßeRoland

Hi.M1 studio mac running the latest version of everything.Bridge does not launch period when network share is mounted.Starts in like 4 seconds when no network is mounted.Went through extensive troubleshooting with adobe techs.Can't solve it.Does anyone know of a replacement free or paid?Thanx 

I have found on web, that Bridge doesnt need CC. Can it be somehoaw installed without CC installing into PC? 

For years, I’ve been using Bridge/ACR to access & process files on my network attached storage (NAS). In early April, Bridge turned into a demon spawn - as soon as I direct it to view a folder on the NAS it kills all network access and hangs my machine. It completely clobbers any network traffic, internet too. Killing the process in Task Manager doesn’t work, the only way to recover is a hard reset. (Every other application or file explorer accesses the NAS/internet flawlessly - it is only Bridge/ACR that breaks the network on my machine. Sometimes it will hang on for a few minutes, which allows me to launch an image in ACR, but invariably it kills everything.) Bridge works fine if I access files locally, and it also works fine if I run it over WiFi (although that is PAINFULLY slow). I’d really like it to get it working with the NAS again as that’s where all my files are. Keeping them locally has workflow, storage, and backup implications – especially if I get a backlog.&

Hello!I am new to using the latest version adobe bridge. I tried to export some images from a shared library (I have the editor access)  by drag and drop to the export panel. I have input all details and clicked start export, but it redirected to a new pop up - "export progress - 0 pending jobs"  Please let me know if there's any way to fix this.Thank you! 

In earlier Bride versions there was a checkbox to disable the necessity of pressing Cmd+[key] and getting rid of that additional command. Please see attached screen shot, in earlier version there was a checkbox to disable the necessity of pressing Cmd. Is there a possibility to permanently activate that star rating and colour label are permanently also show in full screen view (that what you get after pressing the space bar)? When will we get a more modern and faster importer with the possibility to sort and group by date, similar to that one in LrC? Missing since years: a filter to switch between displaying of images/videos/images+videos in the importer, all of them, Bride, LrC , Lr. Appreciate any reply.

Hi All, Wondering if anyone can help me figure out how to view and open Adobe Creative Cloud files in Bridge. It seems as though it should be intuitive enough, but I cannot access any Illustrator or Photoshop creative cloud stored files in Bridge, unless I download them to my computer and view them that way. Which seems absurd and a waste of time. I'd like to get a better all round view of files in one of my creative cloud folders, hence why I'd like to use Bridge. Any ideas?TIA

Just updated CC Bridge to version 2022 on Macbook Pro and now the desktop folders or images dont show on the Essential selection...any advice on why and what I can do? Did the same update on iMac and it worked just fine...Thanks!

Does anyone else have the issue where once a photo has been labelled, after a run of 10 or so images, bridge will jump around the preview section to a different image in the chronological order? A very big pain when culling images to be jumping around with the order.  Thanks

Persistently and randomly gone rogue throwing this error "tr1::bad_weak_ptr" and had to be restarted.

Repro steps on Windows 11:(1)  Open an MP4 for viewing with a media player (e.g. VLC) to identify people in the clip.(2) Open Adobe Bridge 14.1.1.274 to add names of those individuals as keywords to the same clip.Observed Adobe Bridge behaviors:*  Checking one keyword will uncheck the previously checked keyword (quietly).*  Checked keyword is not saved by Adobe Bridge after program exit (again quietly).*  User is not warned of any of the above behavior.

Hello all,These issues are becoming more and more frequent with Adobe products.I have fully-up-to-date CC and all of a sudden I cannot place artwork files navigated to in Bridge CC (8.0.1.202 x64) into illustrator (22.1 64-bit).  It works for indesign, photoshop, and have yet to try AE.  There is nothing odd about these files (tiff, psd, even jpg) and none will place.Upon selecting Place into Illustrator in the right click context menu, it switches to AI and nothing.Task MGR doesnt show that there is a hog of resources or anything so I am not entirely sure what happened.  However, I used this function all over the place yesterday and all was peachy keen.I did get an update today to Dimension, XD, and Photoshop perhaps, but than that shouldn't have made a difference.PLEASE HELP.  At work I don't have time to continually research all these bugs that at one time never occurred.Thanks.Windows 10 64 with plenty of RAM.

    In Bridge 14.1.1 i cannot rate or label foto`s, only the folders. In ACR it works fine. (on Mac m1)      

HelloIn short, Flickr is not showing in the Export area of Adobe Bridge - as per the image. I also cannot find a way to add Flickr as a Preset. I am using an iMac with Ventura 13.6.7 and Bridge 14.1.1.274

Após atualizar 3 computadores para windows 11 uma das ferramentas do adobe Ligthroom e do adobe Brigde (a mesma ferramenta que existe nos 2) deixou de funcionar. Somente esta ferramenta não funciona em nenhum dos 2 softwares. E, é uma das ferramentas mais necessárias no caso dos meus trabalhos. Temos 4 computadores e 1 deles ainda ainda é windows 10, nele a ferramenta não é um problema.No caso é dentro da função "mascarar" o ítem "objetos". os outros itens da função funcionam corretamente. Devo voltar para windows 10 ou há uma solução? aguardo orientação

I edit pixel data of files on MondayOn Tuesday, I batch rename these files with BridgeUsing filters on Tuesday and sorting by modified date, I don't see what I did to the files on that day – they still show Monday as the modification date.

Dear folks, can you please help me open an image from adobe bridge into affinity photo/publisher? I have gone to bridge preferences and did not find affinity listed in the file associations. I have the latest update to both apps...many thanks

I'm suddenly unable to rate or label my files residing on a CfExpress card connected through an external reader.  Last week I was able to, and I am still able to label other files on an Sd card through a different reader.  I tried copying the problem files  to my hard drive, but am still unable to label them.  anyone know why?  Running Windows 11.

Hi Community!I use Bridge descriptions to keep the captions of my photos for a newspaper. It's work perfect for years. In the last month, Bridge no longer saves the metadata. I use a Mac and am up-to-date on the software. Any ideas, suggestions etc. will be greatly appreciated!