Questions

Hey there! I've been trying to optimize my workflow with the worklow-feature from bridge for a month now.For my work i have to produce a lot of different image versions with various formats and resolutions, sometimes with title treatment, sometimes without but always with a specific filename for ingesting in our CMS.Here are the problems i'm experiencing so far:>>> First of all im encountering a bug when scaling images while changing the aspect ratio, instead of cropping the image acordingly to the new aspect ratio, it just exports me 1px of height no matter what i do.I found this bug appears in 2024 and 2023 Version, but not in 2022 Version. Therefore im using the 2022 Version of Bridge, but it would be nice to have that fixed in a future update.>>> Then i'm running into the maximum Limit of queued workflow jobs quite fast, is it possible to raise that limit? At the Moment im working on a TV Series that has 16 Episodes, with around 10 picture alterations for eac

Hi,  can we fix the export module pls ?  This is so slow and akward that I cant understand its still that slow and akward. This is by far the feature that at the end everybody would use if they share jpgs with their clients.But its slow slow slow and buggy. More than 150 images and you need to clear the cache because it stops exporting .... Why?  

I'm using a Mac Studio.I load the images to a Folder I create on my Hard Drive, from an SD card plugged into the Mac Studio.I then select all the images in Bridge, drop down 'File settings' and write project details into the decriptions.I cannot change the Camera settings, this is done automatically. The meta data under Camera Data then shows the correct camera but the wrong lens.the 'Shot Information' is also correct, for the lens focal length, etc. When I open an image in Camera Raw it's correcting for a FUJI lens profile and distorting the image. How can I cancel this?Thank you.Bridge: 14.0.4.222RAW: 16.2.1.1767

I updated a few days ago and just got around to start culling a photo session and the load time for each photo was just unbearable. I tried everything I could possibly think of to speed up the process but nothing worked.I turned on high quality, purged cache, increased cache, different view modes, waited for previews to render, etc.. Nothing worked at all. Before the update I could advance to the next image and basically instantaneously be able to view the image, rate it and move on. This new update requires each individual photo to load, which could take half a second or even a full second to load and then apply a rating, really slows down my process. I am used to being able to sort through 3-5 photos a second and be able to recognize a photo and apply the rating. The buffer this new update has is just not up to par with the previous versions. As I am advancing through the photos it will freeze on a photo as i am advancing and will not update until I stop advancing. I t

I batch renamed 500 photos from the memory card to a new folder via Bridge Batch Rename. Now the files are white and when I click on them, a pop-up states it can't be opened. Nothing happens when I try to change the source to bridge or photoshop. The original files disappeared. I have batch renamed files this way thousands of times. Please, how can i recover my files? Thank you.

I keep running into issues trying to convert these files.  I've tried a few different methods to no avail. 1st method: I've tried selecting all the files I want to export as PNGs in Bridge, dragging them to custom export, but I get a message sayign it wont convert because it is an unsupported format. 2nd method: I go to photoshop > file > Image Processor - and go to save thes AI files as PSDs - and they convert BUT they're all the same size (same size as the first image in the queu I beleive) and are all different aspect ratios from the original files. Thanks in Advance

I'm starting an extendscript project for Bridge, and the example code in the SDK for any of the InspectorPanel examples doesn't work.  I get an "InspectorPanel does not have a constructor" error.  Have these classes been removed?  The SDK docs say "Adobe Bridge 2024" so I assume they are up to date (although the copyright date in the SDK guide says "2022" so maybe it hasn't really been updated in a while....).

It's frustrating that I rarely get a response from any of my posts in the Bridge area, so I'm reposting this latest one here:In Bridge, after opening a raw file into Camera Raw and making adjustments, the thumbnails in Bridge do not show the adjusted file even though the sidecar (.xml) files exists. In other words, it show the unadjusted thumbnail. When I reopen the affected .RAF (Fuji raw file) in Camera Raw, the adjusted picture appears. Bridge Version: 13.0.2 (shows that it's up do date)OS: Windows 10Lots of available space for cache

Windows 11 x64, 64 gRam, 16xi9's, Quadro RTX 5000. Running the latest version of PS (23.5.1) and Bridge (12.0.3). Bridge usually crashes a couple of times a day. It has gotten so bad that I have down loaded Faststone Image Viewer to be able to see and select files. This morning when trying to access files on a network drive via bridge, it just crashes before I can do anything.  After about the 8th time I have downloaded an older version of bridge. I have tried in the past to re-set the preferences, etc, doesn't do a bit of good. I would be embarrassed to have a product that functioned so poorly.  I guess I am the fool for paying so much for PS and associated products SINCE 1998!!!! 

Does anyone else have this issue? Adobe bridge will recognize my Z8 files and convert then to DNG IF I connect my Z8 directly to my computer with a cable, leaving the memory card in the camera. However, if I use a card reader Adobe bridge does not recognize the files. I have tried two different card readers with the same result. Let me know if you have this problem too and how you solved it. Thank you in advance for your help!

I just can't seem to figure this one out! The database I'm working with has a rule that the first image needs to be numerical and the rest of the image span to be sequential alphabetical.For example, I'll have these images:IMG_2013.jpgIMG_2014.jpgIMG_2015.jpgIMG_2016.jpgIMG_2017.jpgand need to rename them for whatever the UPC is, for example:982371818.jpg982371818a.jpg982371818b.jpg982371818c.jpg982371818d.jpg

I am trying to add a script copy my filenames to IPTC Keywords without the file extension in Bridge ver12. I have tried three different scripts from older discussion chains (2010-16) and none seem to be working. I did add the Utlity Script Pack and the script to move File Name to the IPTC Title and it is working. Can anyone help?

Hi, Problem with Adobe  Bridge. Mac os 14.4.1 and bridge 14.0.3.200. Get photos camera => (advanced dialog) This device does contain any supported media. The problem started after the update. All memory cards have the same problem. (Nikon Z7 and XQD cards). Photoshop and camera raw are also the latest versions. Best regards Markus

Sometimes I need to copy the name of an completed image in Bridge to use for another image. Until recently I could just right-click on the image, select rename, highlight the words and right-click to select copy, that no longer works. When I now right-click, it deselects the highlighted words. I can highlight words and  copy in any another document e.g. this message. I have the latest version of Bridge and my Windows 11 is up to date.

For some reason, I cannot get folders to automatically open in a new tab in Bridge, Beta or otherwise. It uses the same tab that is open. I normally right-click on the folder I want to browse in Explorer and choose, "Browse in Adobe Bridge (Beta)". It always opens one tab only and does not retain previous tabs. Before, it would open the program with previous tabs still intact and open a new tab for the new browse command. I haven't had any issues with this until I switched computers. I can't find it anywhere in the preferences, and it did it automatically on the older computer I was using. Would love to have this feature working for me again. Any suggestions would be appreciated. Here is the basic profile of my current computer: Device name MSIProcessor 13th Gen Intel(R) Core(TM) i7-13700H 2.40 GHzInstalled RAM 32.0 GB (31.7 GB usable)Device ID 46D7E6C3-798E-4982-887D-03C91633800BProduct ID 00342-21021-50096-AAOEMSystem type 64-bit operating system, x64-based processorPen and

External hard drive appears in the menu, but Bridge does not show me the contents. I'm on Windows 11

Basically, no matter what I do, not matter what solution I try to follow, Adobe Bridge 2023 crashes immediately after starting up. I don't get to click anything, I don't get to press any buttons or shortcuts, it just loads the UI and crashes after about a second. I'd love some help since I kind of rely on Adobe Bridge for my photography.

I'm working with Bridge 2022, on ma late 2013 Mac Pro. I've noticed that whenever I edit a file in camera raw or change the color label, the date modified gets updated, seems normal, but for my Cr2 files the date modify metadata doesnt get updated. is this a bug that im late to fixing? Just in case I've also tried on Bridge 2024 and CR2 files are not being updated with date modified. Just noticed as well that NEF files do the same My TIFFs, DNGs, and JPGs all update the date modified metadata for something as little as changing the color label. can someone help explain this?

Ouvrire un fichier photos dans  Caméra Raw à partie de Bridge; Bridge se bloque.Version de Bridge:14.0.4.222

Photo Downloader (Bridge 14) is not reading all the files. Each time I retry, I get a different number of files appearing, however there's a substantial amount of photos missing which I can see when I connect my camera directly to the computer. This happened with earlier versions and I thought they had fixed this. I am using a Delkin CF Express Card with a Delkin reader and the photos were shot on a Nikon Z8. Any suggestions would be appreciated. TY.

I have been trying to set up the behaviour of a slideshow in Bridge, using View>Slideshow Options.  On the Display Options panel I am unable to change Slide Duration, Caption or Transition.  All three supposedly have drop-down menus, but when I click on the down-arrows, that field highlights in blue but nothing else happens - I don't get any menus of options to select. I have checked that I'm using the latest version of Bridge. Is there a fix for this?

How can I add support for webP images? This seems like a pretty standard image format. Not sure why this isn't standard in Bridge. Pretty annoying that I can't see these previews in Bridge or on Windows. . . that is one of the core functions of Bridge, visually  browsing images PDF etc in a variety of formats.   

I'm using the very latest verions of both apps. I give colour labels to images in Lightroom Classic. Then I export these images as TIFs and check the folder in Bridge. The star ration is displayed corretly, but not the colour labels. In bridge the diffrerent colours don't show up, the are all just labeled as white. It would be helpful to the exact same colour labels as in Lightroom.

For ahile the Bridge could have multiple Windows by pressing control N.  That was too simple, so it seems they changed it again.  Now how to?

There used to be a plug-in or something for older versions - is this still the case? Could you share here if it is please?Don't people use that as a function of sharing images quickly with people? I can't live without it, and the Photoshop action is so slow and awful and not what you need.  Any help would be greatly appreciated.