Questions

The Crop tool always resets the aspect ratio to 2: 3 like the original image, while I need to crop into 5: 7 with a large number of images. Leading to each file I have to adjust to 5: 7 every time. Too time-consuming. After the crop is finished, the image does not zoom in full screen, it must be zoomed up again. The parameters of the tools are: Graduated, Radial, Brush, they also reset after I exit them. In short, I made a lot of photos and ACR 12.3 took a lot of my time.

Do nada, meu Camera Raw ficou em inglês, sem eu mexer em nada... como faço pra mudar?  

I am shooting on a Panasonic GH5 in RAW. I have been for a couple years and developed and streamlined a workflow with it. I edit from the flat profile, but now Camera Raw appears to be applying some sort of auto-edit that boosts the contrast. I went back and opened some images I'd worked on a couple months ago, and they're still opening fine without any aparent edit. I have gotten a firmware update for my camera since then... could this be a change to the .RW2 format that is now being read differently in Camera Raw? I have checked the profile and it was different than my shots from a couple months ago. I changed that to the same one from before but it's still not what it should be. Here's an example of how Camera Raw is changing my image from the flat base I prefer to edit from.

Please provide me a way to download Camera Raw Version 8.8.

So unfortunately i have updated to the new camera raw and all of my presets are no longer available. i have no clue as to how to add them into the new 12.3 can anyone help? I need to do some serious editing and I cant afford to start from scratch, i had so many presets that i used on a regular basis and im hoping they arent all good for nothing now. Please help.

What happened to it?  I can't make a pano!!!  Is it now elsewhere?  Help!

When I'm working in Camera Raw, in the "basic" panel, it's layed out first with "temperature" and then "tint" followed by the six essentials - "exposure", "contrast", "highlights", "shadows", "whites", and "blacks". When I'm adjusting these I tend to bounce around starting from what needs the most adjustment and then back and forth as necessary until I get the image looking the way I want it too look without clipping or in some cases, with as little clipping as possible. I've often wondered, when the software designers put this together, was there some wisdom in the order of these six adjustments perhaps with the intention that they be adjusted initially in order?...or was the order simply based on what was most often most important.Thanks!

With most tools when working in Photoshop, I can either apply the tool by hiting "return" or cancel the tool and close the tool window by hiting the "escape" key which is really nice for my workflow. For some reason, this isn't true with the ACR filter when accessed through Photoshop. "Return" does apply my adjustments to my image but the "escape" key does nothing. Why? Is it some setting I'm missing? Thank! 

Seit dem letzten Update ist im Camera RAW das Zuschneiden und drehen nicht mehr möglich bzw. extrem langsam. In Ligtroom und PH funktioniert es wunderbar.  Ist das ein Fehler von Adobe und wird es ein Update geben ??Wer kanhn mir helden.Ps.: Funktioniert auf mehreren PCs nicht. 

I'm working with RAW files but can't open them in Camera Raw because of an error. Also different raw files (.gpr, .nef) or jpeg are not possible to be opened. I also tried to reinstall an older Photoshop version (21.1), but still it's not working. Restarting the computer also didn't work... Camera Raw version 12.3What can I do? 

First post here, really in desperation as Adobe chat and a fair bit of searching hasn't produced any real answers.Being old and frugal, I have muddled on with the last stand alone version of Lightroom, and also CS6 Photoshop. I am happy with that, except, the newer camera raw files are not supported, annoying but reality. I have used DNG Converter to turn the files into somethingnthat is recognized by LR/CS6.I now need an updated DNG Converter, and downloaded the latest, 12.3 I think. And, in preparation I deleted the old Converter, it worked, albeit not with my latest camera raw files.When I click on the program now, in my dock, it opens up a small barely visible icon on the screen, and "DNG Converter" is viusible in the upper tool bar. But is not what I have been used to, I don't think it has fully loaded? I have tried slightly older versions as well, V12.0 for example, same result. Screengrab shows the small icon. I also moved the DMG file closer to it, so this is also visible, but

When I edit images in ACR, I used to use the arrow keys to navigate up and down the images on the left side. Now, I can use the arrow keys in certain circumscances. For example, If I am editing basic settings, I can use the arrow keys to navigate images. If I am cropping, I have to use Ctrl+arrow keys to navigate. That extra key stroke may not seem like much, but it is very problematic and breaks an otherwise smooth flow. There has to be a better solution?

Hi, does anyone have a good ACR preset  to convert scanned col negatives to positives?i know it's basically flipping the curve (dragging the white and black points down/up) and I could save that as a preset. But there are other adjustments, like the col cast that would be good to have included... plus all other sliders (except contrast) work in the opposite direction so its difficult to add other presets on top

Hi all. Is it possible to disable the scrubby zoom in the latest acr? I much prefer to create a selection around the area I want to zoom into. Can't  seem to be able to do this anymore.

Hey,since a late Update of Photoshop and Camera Raw (July 2020), the "Camera Raw Filter" looks and works different than before. All of my old Lightroom presets are gone in PS and are now replaced by useless default "Profiles". Is there any way to get the old Camera Raw Editor back or to get your Lightroom filters back in there? What's the right procedure here?Thanks for any help!Edit: Replaced the word "filters" by presets thanks to user elie_di

Hi, I have a raw image file taken with my Nikon and it has been in both Photoshop and Lightroom and somewhere along the way the file has changed. Is there any way to bring this back to the way it was when I took the picture? I tried using Bridge Edit/Develop Settings/Clear Settings and nothing has changed. I know, I should have made a copy first and didn't, my fault. Thank you.

Adobe. What have you done?Overall, I'm not too bothered by the changes in 12.3. Some are improvements, some are slightly worse and I'd certainly like the ability to revery to the previous layout - as someoen who doesn't use lightroom, making it look more like lightroom is just a pain.BUT cropping is now completely unusable - I'm not exaggerating. The previous version was great, simple, straightforward and effective. Now I simple can't use it and am having to do all my cropping in photoshop.PLEASE revert to the previous version until you can make improvements that are actually improvements!

Can we get the UI to be editable like Adobe Premiere, Photoshop etc - so we can choose which panels to "disclose" rather than Adobe's slightly arbitary choices? I mean seriously, who applies a vignette in ACR without adjusting its settings? We have Lightroom for playtime.     [Branched from unrelated thread by moderator.] [Title renamed by moderator for clarity. Was "Camera raw features are gone"]     .

A beta version of the Adobe DNG Converter is now available for download. If you have a newer camera, released since June 15th, you should check out the converter to gain access to your raw files for editing until the next versions of Camera Raw, Lightroom Classic and Lightroom Desktop are released.    Download DNG Converter 12.4 Beta: Windows: https://supportdownloads.adobe.com/detail.jsp?ftpID=6971 Mac: https://supportdownloads.adobe.com/detail.jsp?ftpID=6969

Okay.. So been out of the game for a while and Updated my Macbook Pro (2016-2017) to Catalina.. Then updated Photoshop 21.2, and Camera Raw 12.3..  Unfortunately for some reason no matter what theme i put on Photoshop, Or on the computer itself. Camera Raw is blacked out and I can't see any of the text Anyone else had the issue? Anything I can do I attached Photos Thank You  

Does anyone know why marquee zoom not available in the Bridge Update? I used it all the time, now with update it is disappeared. They moved several items around (like save button, zoom tool/hand tool) which I will retrain myself to use. But marquee tool is a must for quick zoom in on faces and such. Any help?

I have Photoshop CS6. The adjustment brush ( I hope this is the correct name in English) does not work.Is there a simple method to solve this problem or do I have to install again Photoshop CS6?Thanks for your help,Jan Boersma, The Hague, Netherlands

If I install Adobe Camera Raw Plug-in 12.X or later, cameraraw will not run on Adobe Photoshop or Adobe Bridge.In Adobe Bridge, on the ACR layout selection screen, there is no response when the next button is pressed. However, only Camera Raw Preview works properly.Adobe Photoshop says you can't open a program.* I tested it with multiple JPEG, CR2 files. I used the Creative Cloud Cleaner Tool several times to delete and reinstall Adobe Photoshop, Adobe Bridge, and ACR. But, this problems are happening still!It works well on the next person's PC or my laptop. It only happens on my PC! (PC specification is worse than the person next to it.) If I install version 10.5 of ACR, it runs well in Photoshop, but the Preview feature is not supported in Bridge. It just looks like a regular icon. Could it not be executed because of the graphics card specification?[My PC Information]Windows 10 (version 1909) 64bit32GB RAMIntel(R) UHD Graphics 630  

This problem occurs after Camera Raw 12.3 version update. After adjusting the image size in the configuration, you can't zoom in 100%.It supports 100% magnification only with the original size that does not resize the image. For example, if you enlarge the original size of 30x40cm to 50x75cm, and then zoom in 100%, you will still see a 100 percent expansion of 30x40cm.Because of this, problems occur when working on such things as noise reduction and sharpening effect. I'd like to know if this function has disappeared or if it's an error.  And please return the +/-  

Is ACR 12.3 a "Bridge" too far? I have posted before on the problem of opening a file from Bridge into PS when it first opens in ACR. It is virtually unusable due to EXTREEM lag between any slider adjustment and visual result (up to 15 seconds). I have had my hardware tested like never before, the latest drivers, removed all maner of start up programms to no avail. I have spent over 5 hours on line with Adobe support (I can't fault the effort but no cigar!) and there has been no improvement. ACR 12.3 opened from the PS Filters menu works perfectly. It also works in LR classic as a mater of interest.Before the last major upgrade everything worked perfectly and my workflow was tidy and quick. Now if I use Bridge it is taking up to a full minute to get to an opened file in PS.The sequence now is: click to open file in Bridge>wait>File opens in ACR<click open > wait>file opens in PS (no edits have been done so far)>Open Filters menu>open ACR filter> start work - up