Questions

Is it possible to change the default save path for exporting DNG files after AI denoising in the Camera RAW module?

HiSeems to me that the new denoise and enhance in the new Camera Raew are very time consuming when trying to edit multiple pictures. First enhance the pictures, wait for that, the denoise, weait for that, and when doing that it locks photoshop so its impossible to do anything els in the meantime. If possible pls. make it possible to continue working while enhancing is in progress, as in the former denoise with DNG copies

I just installed the October '24 updates. ACR 17.0.0.2043, Photoshop 26.0. GPU acceleration set to Auto in ACR. On loading two CR3 files (Canon 90D) into ACR, the main image came up black. Thumbnails showed correctly. This was both in Photoshop and Bridge-hosted ACR. Rebooting the computer fixed the issue. I also had seen the Radeon GPU problem with this computer (with Sonoma and ACR 16) but not recently, and rebooting also fixed it then. Adobe Photoshop Version: 26.0.0 20240927.r.26 a733fda x64Number of Launches: 77Operating System: Mac OS 15.0.1System architecture: Intel CPU Family:6, Model:14, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreadingPhysical processor count: 6Logical processor count: 12Processor speed: 2600 MHzBuilt-in memory: 16384 MBFree memory: 6314 MBMemory available to Photoshop: 12672 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 7.24.8SAM SDK Version: 9.1.0.1-fioACP.local Status:- SDK Ve

This seems to be a new problem with the latest version of ACR when using Remove with Generative AI: the content generated is slightly darker than the rest of the image, and there's a hard edge to the generated content. I don't recall this being an issue when using Generative AI before to remove objects. See the following screen shots that document the issue. Note how the generated content leaves a "stain" on the image where it removed the soft box.Camera Raw 16.5Mac OS 15.0.1

.why will the new denoise ai not show when i open an image in camera raw 17.i am using windows 11

Camera RAW 16.5 for Mac running MAC OS Sequoia is previewing inaccurately suddenly.Images load into Camera RAW and look dark despite reviewing all settings. When I render the image into Photoshop, it looks completely "correct"It obviously makes using Camera RAW impossible.What am I missing, something simple?

I am opening an image (1024 × 853, colour profile: sRGB IEC61966-2.1) with the Camera RAW. After that, I am trying to enlarge it by following those steps: Right click -> Enhance -> Super Resolution There I see white image on: "Enhanced". When I click "Enhance" I see the following result: Version: Photoshop 25.12.0 (part of photography bundle)Macbook pro 2019, 16inchMacOS: Sonoma 14.6.1 (23G93)

    We're excited to announce the MAX release of Camera Raw 17.0, packed with powerful new features to enhance your creative workflow! ---------------------------------------------------------------------------------------------------------------------------------------   Camera Raw 17.0   What's new? Remove distractions in a photo with Generative Remove. Generative Expand, powered by Firefly. Supported cameras and lenses Other features and enhancements          ---------------------------------------------------------------------------------------------------------------------------------------   To update Camera Raw to 17.0, click "Update" in the Creative Cloud desktop app next to Lightroom Classic.  More detailed instructions for updating     If this was helpful, please click the  Upvote icon in the top left corner of this post. Your feedback helps us improve the experience. Thank you!

Das neueste Update ist eine Katastrophe! Ich muss ständig in der Menüführung auswählen hin und her scrollen, suchen...etc Das macht die Arbeit ungemein aufwendig und ich finde keinen Mehrwert durch das neue Update! Bin kurzd avor mein Abo zu kündigen und auf Capture One umzusteigen. Wie kann ich bei mehreren in den Raw Konverter geladenen Bildern den Weissabgleich mache ??????

bonjour a tous, j'ai l'habitude de travailler avec des profils RNI ils sint compatibles avec LR classic et CAMERA RAW j'ai la version 4 et la 5 mon problème est quils s'affichent dans LR Classic mais dans CAMERA RAW seul la version 5 affiche les profils.  la version 4 bienque telechargées ne s'affichent et il est impossible de la réinstaller puisque PS m'indique qu'elle est déjà installée ??? j'ai tout essayé (redemarrer mon macbook pro, tentative impossible de réinstallation..) rien n'y fait quelqu'un a qui cette mésaventure serait arrivée ?  je prefere travailler dans CR plutot que LR... bonne journée a tous

I'm not sure if I'm in the correct group...I am trying to add photos from a Scandisk to Lightroom.  The images are raw files and I keep getting the message the format is not compatible.  This only happens with Raw files.  Any ideas why?  Thanks in advance for any help.

El proceso del asunto lo he seguido intuitivamente, dando como resultado un problema, derivado de mi ignorancia, con archivos virtuales que Windows muestra en miniaturas de color (son en blanco y negro) y asuntos como borrarlos y que no aparezcan en la papelera etc.Todo ello puesto que cerré la edición con "Abrir en ACR" y no con "HECHO" y pasos siguientes en Bridge. He sguido los pasos lógicos en búsqueda de formación, pero no encontré respuestas adecuadas. Pido, por favor, que alguien me diga dónde puedo formarme en esto.Gracias anticipadas

This post applies to Camera Raw.Post Lightroom Feedback here   This thread is now closed. Please update to Camera Raw 17.x. If you wish to provide feedback, please go to the new article.   The Photography team is sharing an early look at Generative Remove, which makes it easier to remove unwanted objects and distractions, even on complex backgrounds, with a simple brush stroke. Generative Remove is powered by Firefly AI.   How to use Generative Remove on a desktop: You can find Generative Remove under the newly renamed Remove panel (aka “Heal”). Make sure the “generative AI” checkbox is enabled before you start brushing (note: when unchecked, Lightroom will use Content-Aware Remove to fill your brushed spots).  By default, you will be given a moment to refine your selection with an add or subtract brush. Remember to include shadows for a more accurate result! You can also skip this step by holding down ‘CTRL’ on windows or ‘CMD’ on mac as you finish your bru

Hallo ihr Lieben, ich habe folgendes Problem (und bin auf den Hilfeseiten und hier in der Suche nicht fündig geworden): Wenn ich RAW-Dateien in Photoshop öffne oder bei einer bereits geöffneten Datei den Camera RAW-Filter öffnen möchte, tut sich... nichts.Klicke ich irgendwo anders hin, ertönt nur der übliche Fehler-Ton von Photoshop (als würde es noch laden und deshalb gerade keinen anderen Befehl annehmen). Auch nach längerem Warten (ich habe zB mal über 10min gewartet um es auszutesten) passiert rein gar nichts.Photoshop lässt sich dann auch nur via "Task beenden" schließen obwohl es laut Task-Manager nicht abgestürzt ist.Laut Photoshop wird die Grafikkarte erkannt und ist kompatibel (laut Lightroom wird sie vollumfänglich unterstützt). Hat jemand dasselbe Problem und / oder weiß Rat?Ich habe die Creative Suite schon vollständig inkl. Einstellungen deinstalliert, PC neugestartet und alles wieder installiert - Erfolglos.Natürlich kann ich die Dateien in Lightroom bearbeiten

Bonjour - J'ai un abonnement photographe Creative Cloud mais je ne parviens pas à ouvrir Camera RAW. Je viens pourtant de mettre à jour cette application. Pourriez-vous me dire comment démarrer Camera RAW. Par avance merciCordialementJYD

I'm trying to add my first LUT into camera raw. Following tutorials I've found online, it says to open an image in Camera Raw, click the three dots next to the profile options, and then - while holding the alt key on windows - select the create preset menu option. On my system, as soon as I press the alt key, the menu disappears and all the camera raw settings change to a reset mode. Am I doing something wrong?  I appreciate any help I can get.   

I have a lot of problems managing my NVIDIA graphics card using camera raw. It seems like it doesn't manage the ram well. My work slows down because it works slowly. Does anyone know how to solve this problem? My graphics card is RTX40. Thank you 

Hi @ all.I m working every day with camera raw.During the last years, i noticed that it is getting slower day by day.A few years ago when i moved from one photo to another, the photo was changed immediately.Now i have to wait 3-4 - 10 seconds.When i work with some masks, camera raw is getting slower.When i want to off one mask for example (click on the eye icon), it need 4 5 seconds to disable the mask.Actually i m working with a Mac Book M1 PRO MAX. in 2022 camera raw was "smooth as butter" now.. same hardware same camera it is very slow.I spent a lot of times looking for a solution.I Installed old version of  OS but nothing is changed.If is for you the same please upvote.If you found a solution, please let me know how.Camera raw is a must and a standard for pro and it must work super fast on good hardware.

I have intel i9 13th generation with nvidia RTX 3060 12Gb OCWith 64GB DDR 5 ram but getting slow during working time and preset applying time. lightroom their is no lag also with preview of presetplease update the bug in camera raw now using camera raw 16.5

I cannot open a jpg-document in Bridge as "Open in Camera RAW"

I have an OLD version of photoshop (v12) that doesn't support my .NEF (raw) files from my new Nikon Z6ii. The Camera Raw plug-in is v6.7. I downloaded the latest camera raw plugins from the Adobe site and installed them, but i'm still getting an error.--> Is my version of Photoshop to old to ingest the newest Camera Raw plug-ins? I'm using Windows 10. Here's some of the system info. from Photoshop:Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32Operating System: Windows NTVersion: 6.2

T Adobe DNG Converter command line interface documentation, it says `-jxl_distance 0` means losslessI did my test on a 24MP RGB raw image, when using `-c -jxl_effort 9`, the output is ~80MB, takes ~2s, when using `-jxl_distance 0 -jxl_effort`, the outptut is ~50MB, takes 20s. Why is there a difference? Are they 100% equivalent? 

camera raw not work selection subject people 

This used to happen one in every few hundred, now it's happening to every one in 5-10 max. It is getting beyond frustrating, having to redo every image again. Does anyone know why and how to stop it? I did find another post, and tried what she was told, but it didn't stop it happening for me.

Help! Read loads of stuff on this but still can't get my raw files to download on to lightroom. I'm a total rookie having just started with lightroom so any help is much appreciated. My raw files are supported by lightroom: CR2 from my Canon 1Ds Mark II. Do I need to dowload the Camera Raw plug in to make it work? Files seem to be downloading but then after a few minutes it just fails.