Questions

 In the Person Mask Options section of the masking section in Adobe Camera Raw there are boxes to check for lips, hair etc. There is also button to create seperate masks.Is there a shortcut to check all the individual boxes at once?Thanks! 

For weeks I have been using the Denoise feature on multiple pictures at once, but after I did the update 2 days ago it won't work. It will load for a couple minutes and then say an error occurred. It is very frustrating and I tried to uninstall the update out of pure frustration but it does not give you the option to.  I am on a time crunch and this is causing a lot of unnecessary stress and waste of my time

Here's the issue: One wishes to sample a color from an image, then USE that color as an Adjustment Brush or Grad Tool, or Radial Tool overlay.   The problem is the Color Picker in those local brushes' panels only take HS(B) values. (Actually the Brightness or Lightness is ignored). One has to SAMPLE the RGB, (or L*a*b*, or CMYK) values in ACR, write them down, open a converter (even Photoshop) to convert the Sampled ACR Color Value to HSB, (and write it down), then come back to ACR to enter the values into the Adjustment Brush Color picker.  

As I said, I can not save a raw file as jpeg.

Every time I update photoshop and camera raw it then crashes after the upload. Try speaking to adobe they are useless they send you on a hike trying to get someone to fix it ? Four people took over my high spec  machine to no avail. Useless junk 

Since the last update when I try and open camera raw in photoshop23 it does not open and frezes the program. So far I have gone in and turned off the use graphics card option in preferences. what else can I do? here is the system info Adobe Photoshop Version: 24.1.0 20221206.r.166 be4691b x64Number of Launches: 28Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.22621.963System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, AVX-VNNI, HybridCPU(2:8), HyperThreadingPhysical processor count: 10Logical processor count: 12Processor speed: 1882 MHzBuilt-in memory: 32389 MBFree memory: 20762 MBMemory available to Photoshop: 24887 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 6.15.3SAM SDK Version: 2.0.0-main.1564ACP.local Status:- SDK Version: 2.11.0- Core Sync Status: Reachable and compatible- Core Sync Running: 6.0.0.43- Min Core Sync Required: 4.3.66.28Live Edit Client SDK Ver

no meu photoshop o Camera Raw simplesmente nao abre, clico na aba ele fica como se tivese aberto porem na minha tela nao aparece nada e nao me permite clicar em mais nada, tenho que aperta a tecla " Esc" que meio que fecha o aplicativo porem na minha tela nao aparece nada, nao tenho acesso nenhumm, como se tivesse aberto em um lugar diferente, literalmente fica invisivel a janela do Camera Raw

So, Bridge cannot open raw files with "right click" and open with Adobe Camera raw. Error - "Camera raw editing request that a qualifying product has been licensed" BUT! Also he can open with double click with "left click" What should I do ?

ACR version: 15.5.1.1597Bridge version: 12.0.4.286 Repro steps:1. Select a large amount (more than 50) of photos in Bridge and open in ACR.2. Select all photos by Ctrl+a and click "auto" to apply auto tune adjustments.3. Double click on vibrance and saturation sliders to reset their values to 0. At this point all photos still have the auto tune adjustments when viewing them in ACR.4. Click "Done" to save and exit ACR.5. When reopening the photos in ACR, many of them lost the auto tune adjustments.

Hi, Is it possible to create an adaptive ISO preset that utilizes the AI Denoise settings I have created for various ISO settings?  If so, do I use the generated .DNG files to do so.  I am able to create an adaptive ISO present with the .DNGs however, it only appears to utilize the manual denoise settings not the AI Denoise settings. Thank you in advance,

Diffirent between shortcut in camera Raw'P" : Toggle preview '\' : Swap current and default all settings Have a good day everybody

Profile => Adobe Color Make adjustments, tone curve, etc, save as new profile.This new profile works flawlessly in Lightroom classic,  Lightroom  Profile => [Custom made from DNG profile Editor]Make adjustments, tone curve, etc, save as new profile.This new profile shows up in Lightroom classic, but doesn't show up in Lightroom. I've opened up these two files, and the one that works properly [Adobe Color] seems to be around 200kb, and the other is aboug 2kb. It's clear that the latter case is missing information due to me selecting a custom profile. Is there a way to create a profile that has tone curve (rgb) adjustments that work with your own custom profiles and not adobes?

When I drag out a Radial Filter in Camera Raw (15.1), there there are no ajustment handles/pins/frame. I cannot move, reshape or resize the filter area.  This only happens on my desktop PC, on my laptop everything works as expected. Am I missing something?  I can't see any difference in any of the settings.

Photoshop is up to date and the same for Bridge and Camera Raw but suddenly Camera Raw stopped to work. I can't use it any more in my computer (Window).

I have a laptop with Windows installed on it. When I work from home, I use only one screen. However, in my office, I connect it to a second monitor using HDMI. Now, I'm encountering an issue where I'm trying to open Photoshop RAW, but nothing happens. The same problem occurred when I was in my office. I connected the laptop to my second monitor via HDMI and then I realized what was going on: Camera Raw opens on my second screen.So, the problem is that it's trying to open on the second screen even when I haven't connected it.

Hice unos ajustes de exposición y otros adicionales con los deslizadores.Conforme a la experiencia, le dí al comando de selección, apareciéndome una máscara que había utilizado para el mismo archivo. Según lo que veía en la miniatura deduje que lo que estaba seleccionado eran los sujetos. Esto es lo que quería. A través de las opcione de esa máscara selecioné invertir, pues me interasaba editar el fondo separadamente, desaturándolo, etc. Los sujetos en pantalla aparecieron con colores tenues y en color natural el fondo. Intenté desaturarlo y no pasó nada, ni en los sujetos ni en el fondo. Comprobé con otros ajustes y tampoco. Por otras veces sé cómo acabar saliendo de la situación pero acabo teniendo que volver a empezar. la pantalla estaba así:¿Está "colgado" o hay algo que tenía o tengo que hacer? El trabajo con las más máscaras una vez lo hago todo a la primera y en otras llego a un bloqueo semejante.Parece que no acabo de encontrar el procedimiento a seguir a pesar de lee

Sometimes when I click on the Camera Raw filter. It freezes and I have to force quit the application

Hi everyone, I am using Camera Raw to edit and save my original RAW files to JPG format. Unfortunately, the META-Data will be overwritten when it comes to the date and the time when the photo was taken. In the RAW files is the original timestamp, but when saving to JPG, the timestamp in the JPG is from that moment when the JPG was generated, and not the original timestamp from the RAW. Is there a chance to keep the original timestamp in my saved JPG? 

The Creative Cloud app updated my Camera Raw to the latest version 15.5. Problem: it just won't load in PS or Bridge. It locks up the interface, blocking you from using any other tools, but it just won' tload. You can get out of the "lock" by hitting ESC. I tried restarting PS and also Windows, no luck. I tried re-installing using the download from:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-in-installer.html  but the result is the same. I used that link to go back a version, that one is working OK.System info: PS 24.7.0, Bridge: 13.0.4.755, Windows 11 - up to date.Let me know if there is any other useful info I can provide.Adriaan Sachtler

I used to be able to edit all of my jpegs in camera raw by first opening them in bridge, selecting and pressing command R.  However, now that I upgraded to cc and there is no bridge I can't figure out how to edit multiple jpegs through camera raw. Can someone please help with this?

I started using my PS & ACR yesterday to do a job & every time I went into ACR and made my adj's, and tried to send it on over to PS,  it would come back with an error & shut everything down .  I found a work around way to use it today & so far it's OK.    The crash report says ,  I attached a copy of the error report,  I just tried to go in just now & it will now allow me to go into the Presets panel,  when I get in there,  the mouse just sits there, or if it does allow me to use them. It usually just kicks out after giving  I me the error message report.  I've never had this kind of problem that I can remember.  I worked in the new PS Beta program this morning,  could that be the problem ?  I have someone that does home computers to help me, but I don't know if he will be able to work on this ?  Thanks Janice Butler 

ACR 15.2 Windows 11   1. "Adobe Poziom" powinno być "Adobe Krajobraz" (Landscape=Krajobraz) 2. "Adobe Pionowo" powinno być "Adobe Portret" (Portrait=Portret) 3. "Upright" powinno być "Korekta perspektywy" 4. "Szczegół" powinno być "Szczegóły" 5. "Ogranicz do obrazu" powinno być "Dopasuj do obrazu"6. "Piórko" powinno być "Wtapianie" 7. "Nic nie sprawdzaj" powinno być "nic nie zaznaczaj"

Hi,Is it possible for Adobe to fix filters applied to panoramas that could affect entire panorama?To fix differences on the edges I duplicate document-> offset -> apply filter -> offset back-> drag and drop to first document-> mask the borders.ThanksJacek 

Impossible d'ouvrir mes fichiers Raw sur photoshop 2023, je suis obligé d'utiliser une vieille version 2020peut-on provisoirement accéder-réinstaller une vieille version de caméra raw ? Boitier Nikon D5photoshop 2023Caméra RAW mise à jour 16.0 (!!)MacOs 13.5.1 

I recently upgraded from Elements 14 to elements 2023. When I open a NEF file from my old Nikon d60 there are strange color streaks in the opening RAW screen. It doesn't happen with my  old RW2 files from Lumix camera or with NEF files from my newer Nikon Z5 camera. If I then click open the image it appears normal in the editing page. It's just the annoying streaks(usually red) in the opening screen. See attached screen shot. Notice the red color on the ground. I have reinstalled the app. and fiddled with different versions in Calibration and color profile with no success.