Questions

I have a weird problem with a book in FrameMaker 2020. It is a book with multiple chapters, and the footer in each chapter has a "<$curpagenum> of <$lastpagenum>" ("5 of 20" for instance).While the counter works ok on the first page of the last chapter counting "5 of 20", the first page in the first chapter which should count "1 of 20", counts 1 of 5The chapters numbering properties seem to be correct in the book with the first files page numbering starting at 1 and the following chapters/page numbers being set to "continue". For some reason the first chapters <$lastpagenum> does not reflect the books total number of pages even if I have updated the book.I must be overlooking something... but what?

[Unicode] Character Variables in Framemaker About If your document, project or organization has a modest number of page text elements that can be considered single characters, adequately identified by their Unicode names, and needing focused treatment in your Framemaker documents, this posting may be helpful. The scheme is likely portable to other DTP/WP apps, such as InDesign, but the Definition syntax is apt to vary. Simple easy-to-remember scheme Each candidate character is a single Framemaker Variable. Name: U+FFFF FORMAL UNICODE NAME Name: U+1FFFF FORMAL UNICODE NAME Definition: <ChFmtAsNeeded>\uFFFF   or in semantic & overlay cases Definition: <ChFmtAsNeeded>\xFF Examples by way of illustrating why… …followed by more narrative discussion after list. Name: U+1F16D CIRCLED CC Definition: <CCicons>\x63 Issue: FM has no SMP support yet (FRMAKER-10976)(and very few Unicode fonts populate 1F16D yet in any case) This addresses the SMP (Supplementary Mult

Variable Page Count has it's quirks: When the book files use "Continue Numbering From Previous Chapter in Book" then the variable increases from file to file, because it just takes the value from the last page. It can not be used to sum up in the other cases, because it is formatted (how to sum up V + VII + IX...?) The core to get the desired information for summing up the total is quite simple:   KLD_Z.GetPageNums = function (oDoc) { /* Get information about page numbers Arguments oDoc document to be handled Returns object with the following properties: .nFirst Page number of first body page (integer) .nPages Number of body pages .iFormat Format of pagen number (an integer!) */ var oPage, obj= {}; obj.nFirst = oDoc.FirstPageNum; oPage = oDoc.LastBodyPageInDoc; obj.nPages = oPage.PageNum + 1; obj.iFormat = oDoc.PageNumStyle; // is an integer return obj; } //--- end GetP

Hi All,I have FM documents with links generated using Hypertext (message url). These links work perfectly in FM, but do not work in the PDF documents I generate from the FM documents.By contrast, the conversion does not break cross-references. These continue working in PDF.I have checked the optimization options and that didn't help. Can someone help me please? I'm using FM 2019 15.08.979. TIAAviva 

I am a beginner, trying to get to grips with the Framemaker demo. How can you set up guides and get things snapping to them? I found instructions on a non-Adobe site saying that you create guides by dragging from a ruler, but that doesn't work.

Dear experts,I try to find any character format with the following script:var aLocNames = [], j, jMax, oFindParms, oPgf, sTag, tRange, tRange, zz; // tRange = new TextRange(); oPgf = oDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf; tRange.beg.obj = tRange.end.obj = oPgf; // set up the starting TR tRange.beg.offset = tRange.end.offset = 0; // Find any character format iFS, iFV, sSearch, iMode, bWord, bCase, bBack (wildcard) oFindParms = KLD_F.GetFindParameters (5, 0, "*", 1, false, false, false); KLD_Z.InitFA_errno (); // reset - it is write protected tRange = oDoc.Find (tRange.beg, oFindParms);// initial find zz = FA_errno; oDoc.TextSelection = tRange; // debug: indicate visually oDoc.ScrollToText(tRange); $.bp(true); sTag = tRange.beg.obj; //<<<<<<< How to find the tag name? aLocNames.push(sTag); while(FA_errno === Constants.FE_Success) { tRange = oDoc.Find (tRange.beg, oFindParms); zz =

In response to this post: https://community.adobe.com/t5/framemaker/display-of-imported-pngs/m-p/12237246 I tried to reply and typed my reply and hit post, and I got hit with a "post flooding" error right after I clicked Reply, entered my reply and clicked Post, so I thought I would follow up here: For Export to PDF - There are no special settings that I could findanywhere that would help me get the equations recognized as images when exporting to PDF. The equations remained recognized as text.            For Export to PDF/XPS - There was a single setting that I could try(Optimize for Image Quality), but again, the equations were not being recognized as images. Only text.            For Save As HTM/HTML - I tried Lin's recommendations (Save >Advanced, and Web Options) at a size of Cambria Math 14 point, many subscripts, especially those with a descender such as a "

I have an equation-laden document that I am writing. The equations are being created in a Word doc (.docx) using Word's native equation editor. The .docx file is then saved as an .htm/.html file and all the equations in the document are automatically saved as .pngs in a separate folder named as image.(n), where n is the image number.  I double-click an equation in this folder to automatically open the equation in my image editor (SnagIT - I don't need anything as heavy as Photoshop as I am not doing any modifications to the equations) and save the equation without any changes to it whatsoever with a new name. I then import the image into Framemaker byreference.   I don't mess w/ the dpi of the image when I select it forimport - any image in the folder that was created during the saving of the Word file shows a dpi of 96 in the Imported Graphic Scaling dialog box when I select it for import and although this seems nutty to me (because none of the images are over-sized). .

Hello Guys I would like to know if I can have some help to find out how a CMS could benefit us and if it is something to consider investing in. I have never worked with CMS before and I have read about but it is not clear to me yet. Thank you   

Hello Is it possible to create an editable/fillable PDF from FrameMaker 2020? Thanks!

When i export to pdf and open the document in microsoft edge the contents is out of order, i am trying to correct this. My 130+ page document uses disconnected pages. I use stand-alone table of contents in the document. Any help is apprichiated.Mircosoft Edge & Chrome Screenshots 

We just moved from Frame 2017 to 16.0.2.916 (whatever that means). I opened one manual's book file, opened all the files in the book, and printed the book to PDF using Adobe Acrobat. About half way through the list, frameMaker closed abnormally but it did produce a PDF file to that point.Has this happened for anyone else?

Is there a way to combine the two generated lists on one page? 

I am building DITA documents in FrameMaker 2019. The hierarchy in the DITA map is not being reflected in the PDF output I generate. For example, in one small document I'm developing I have the following hierarchy of topics:- What is DITA     - Why Choose DITA     - Focus on Best Practices         - Minimalism         - Structured Writing         - Topic-Based Writing         - Content Re-Use     - Core Structural Elements and Attributes           - The DITA Specification               - DITA Maps                    - DITA Map Definition                    - Book Map Definition               - Concept Topic Definition     

Hi, I have generated a TOC for the book, but the hyperlinks are not working for some chapters. These are chapters I have changed the file name. I created another book but they don't work either.  

I noticed some files have colors such as color24, but some files have just a few available. How can I add more colors to a file or have the same in all?  Thanks

I am publishing my FrameMaker book to Responsive HTML5 output. The images display in the HTML output, but images within the same section are overlapping each other. Also, text from the next style is displaying on top of the image.  Has anybody run into this? My images are inserted in Anchored Frames. I have played around with various insert settings, but none of that seems to make a difference. Thanks in advance for any insight. 

I work in a department in which we produce financial factsheets that are imported into Structured FrameMaker 11 in order to produce the formatted documents. Currently, we are working in FrameMaker 11 (Structured). Because this version is no longer supported by Adobe, we are considering upgrading to the either FrameMaker 2019 or to FrameMaker 2020. What has your experience been with these versions? Are the any bugs that we should be aware of? Are there  any software enhancements in these versions that you recommend? Are we safe to upgrade from Adobe FrameMaker 11 to either of these versions, or should we update the versions incrementally? Any information will be appreciated. Thanks. Brenda

I am exporting my structured .fm files to XML and we see bold format is not working in the XML file. is there any way to automate the bold format? by mapping it for XML conversion? or any other way... We have 3000+ pages ..so wherever we have used bold format is not appearing in the XML file...it would be helpful if we succeed in automating this P.sI am a technical writer and not much experience in mapping elements or making code changes. so precise explanatio would be very helpful.

Hi All, I am trying to open 64 bit Framemaker file which is located on my local system through a 64 bit C++ app. I am having FrameFDK libraries on my local system as well.I am able to open Framemaker  application from the code.One of the file in the library “Fapi.h” has a method “F_ApiWinConnectSession” which actually create a Framemaker session for the file to open up inside the Framemaker app.The above method will return “0” as return value if the session has been created successfully and the file will open up. But I get a return value as “-20” and the file is not opening within Framemaker app.

Is it possible to find and copy whatever file defines your saved workspace? I had to reinstall Frame on my home PC and I was wondering if there was a way to match my pod setup without doing each tool one at a time.

The HTML5 output that I generated form FM 2020 V16..0.0, when deployed to the dev environemnt is not working. The dev console lists the following errors related to Javascript: 1) Refused to exceute the inline script... 2) Uncaught Eval Error: Refused to evaluate a string as JavaScript 3) Uncaught ReferenceError: gTopicFrameName is not defined   I am new to FM and HTML, please help me understand and resolve this issue.   Thanks   Moving from Using the Community (which is about the forums) to the correct forum... ModTo ask in the forum for your program please start at https://community.adobe.com/

I installed framemaker on a surface pro i can login under admin login but when new user launch framemaker nothing happen. i added the user  as local admin and made sure c:\user\appsdata\roaming\adobe\framemaker have full access to the path but still no luck in launching Framemaker i have 3 new user with the same problem no error come upbut when i log to the surface pro my self i can open framemaker.in the past i was advised to check regedit and change to %userprofile%\documents that use to fix it but not anymore. any help is appreicated

Hi Framers, I'm trying to put Tab Stops with Leaders in a Table. It appears that's not possible. Im I missing something? Thanks! Sam

When wanting to edit an imported jpg file with photoshop using the shortcut esc + l + g FM opens RoboScreenCapture instead of Photoshop - as the shortcut is IDENTICAL! How can I change the keyboard shortcut or how can I use a shortcut to open photoshop and NOT RoboScreenCapture?Anybody got an idea?