Questions

Je ne peux pas utiliser mes RWA issus de Panasonic dans l'appli web...

Hi. I have a new laptop, so I'm not sure if this is new or was always there. Either way it's driving me crazy! I would like to not see any promotions while I'm using the app. It's distracting and annoying. I pay my subscription. I should not have to endure upselling. I've tried turning off Rich Tool Tips and Notifications, but the banner message is still there. Is there any way to get rid of this and/or similar promotions? Thanks in advance!photoshop Screenshot 2025-12-03 144353.jpg

I used Nano Banana to add a missing person into a group photo. We had four people in the original photo, and a fifth person who couldn’t attend was photographed separately. Nano Banana eventually created a good result, but it took many attempts and long delays due to free-tier limitations.Since I already have a paid Photoshop subscription and saw that AI image models (including Nano Banana / Gemini) are now integrated, I wanted to try doing this directly in Photoshop.However, I couldn’t figure out the correct workflow.I’m not sure how to properly upload two images and ask Photoshop to combine them.I tried placing them on separate layers, but Photoshop AI kept generating incorrect results or replacing people instead of simply adding the missing person.I would really appreciate a clear explanation of the correct method to do this in Photoshop - preferably with screenshots or step-by-step instructions.Is this feature supposed to work the same way as it does on the Nano Banana website (whe

In the previous version of Photoshop, v26xxx when you used the "Open as OpenColorIO" feature, you could properly open an AcesCG file and it would look correct. However in v27xxx this feature is not behaving properly. I'm using the same steps as in v26 but the result when it open is completely wrong. It is either broken or the behavior and how to use this tool has changed. Can you please verify?

Each time I create a new file in Photoshop (File > New), the creation date is set to a date in the past instead of the current date and time. Is there a way to fix this? It is quite annoying when sending the image to a phone where it will appear in the wrong order, and I would otherwise need to change the date manually each time. 

Hello, when I attempt to open photoshop, the splash page starts up, and it crashes from there, never opening the app propper. I have followed a few other tutorials for how to fix this, but haven't had any results. I do not have this problem with Acrobat or Illustrator, the only other two adobe apps I have installed. I have:1. cleared my preferences2. uninstalled and reinstalled photoshop3. uninstalled the current version of photoshop (27.1) and installed an earlier version of the app. 4. uninstalled and reinstalled my up to date graphics driver5. used the adobe cleaner to remove every app related to adobe on my computer, then reinstalling adobe creative cloud to start fresh6. changed my com.adobe.dunamis file to com.adobe.dunamis.old in order to have a new file created. If it is important information, I have used photoshop on this computer before and am aware that it works near flawlessly in the past. Whenever I open photoshop I try and make sure that no other or a minim

I love the brush modes, being able to paint in multiply, darken etc without creating a new layer is extremely useful. If this could be launched as a pop up window or incorporated within an existing window (Brush Settings or Contextual task bar for instance) to place it closer to the area you're working on would be a game changer. 

Why is CTRL F4 not down as Close in the list of keyboard shortcuts ? or preferences?keyboard.jpgCoz let's face it, that's what happens.  

hi there! i'll try to be brief with my problem: i am working on a poster series for which the entire type is rasterized in one single layer, some bits of it are blurred, but the blur is made with noise -- i have attached a screenshot. in order for it to look like in the screenshot, i've made duplicates of the layer -- in total i have four copies of it. if i leave just one layer, the type looks a bit flimsier.  when i export to pdf though it renders just one layer of type, it's like the others don't exist. if i merge all layers the same thing happens, it ignores the duplicate layers and the flattened image looks like it only has one layer of type. i tried making a new document and dragging all my layers to it but i encounter the same problem. what's weirder is that i made some other graphics earlier today from the same series and it exported just fine then.  anyone got any clues as to what this could be? Screenshot 2025-12-02 at 22.30.47.png

I have used the both Denoise and Sharpen that is installed in the new update. They are disappointing and do not come close to what the original Denoise and Sharpen. I have been using both since they came out from Topaz several years ago. When I saw that they were imbedded in the new update I did a comparison. The separate program that I have used for years is far and away a better process. I saw little difference in the pic after it was Denoised with the new update. 

  ЗHello! Please help me solve this problem. I need to stretch an image strictly horizontally from the center to the edges (as in Figure 2), but Adobe Photoshop resizes the image from the "left" side to the "right" (as in Figure 1). Perhaps the problem is in the advanced settings; where can I find them?   [formating fixed by mod]

27.1.0 w tej wersji bardzo źle działa zaznaczanie -select subject. Albo baaardzo wolno się generuje, tragicznie wolno, albo na końcu wyskakuje błąd, że nie da się zaznaczyć...

I have been having this issue for a while, where I am unable to open or save as a file. I can make a New document tho. Anyway, when I try to Open Or Save as a file, I get a blank black page, and it stays like that, and nothing shows up. I tried looking this up, but it doesn't seem that anybody is having a similar issue. Can you please help me?I have attached screenshots of the problem.  Screen Shot 2025-12-02 at 6.36.39 PM.pngScreen Shot 2025-12-02 at 6.36.31 PM.pngScreen Shot 2025-12-02 at 6.36.19 PM.png

I have just spent another 1.5 hours with Adobe controlling my machine to get Adobe 2026 to print on a standard Canon TS8751 printer - all to no avail.  Their conclusion was that it is a Windows 11 problem - and not Adobe! - and that if I reinstall Windows it may cure the problem - but they were not sure.  I find it interesting that everything - including Photoshop 2024 - prints on this prnter but not 2026 - its Windows!

Hi everyone,I run a content site [removed by moderator] and I create a lot of visual assets in Photoshop. Recently I noticed that when I export images (PNG or JPG), the text and icons look slightly blurry on the live site, even though they look sharp in Photoshop. I’ve tried: Export As / Save for Web 72–300 DPI Smart Objects Different scaling settings If anyone has experience exporting images for WordPress blogs or high-quality web use, what settings do you recommend so visuals stay crisp on the site?Thanks in advance!

Bonjour.Comme d'autres utilisateurs, je n'arrive pas à utiliser dans Photoshop Gemini et flux kontext La barre de progression avance et ce stop avec le message d'erreur : "Votre administrateur système n'autorise pas l'accès à cette fonction pour le moment. Contactez-le pour plus d'informations." J'ai contacté mon administrateur, qui n'a pas mit de restrictions sur cet usage. Comment faire s'il vous plait pour pouvoir les utiliser dans photoshop.J'ai abonnement creative Cloud proMerci

Could I get a download link for Adobe Photoshop CC 2015? My laptop doesn’t have enough RAM and GPU power to run the newer versions.

Hi, I copied the presets folder from Macintosh HD/Applications/Adobe Photoshop 2025/PresetsBut the brushes folder contains only two files: legacy brushes and converted legacy tool presets. Does this mean that if Photoshop erases all my brushes again, I'll have to re-import them and the backup won't help me with that? Btw, if I need the back up, I will just move the files to the presets folder? Because I think it's dangerous to mess in the library folder unless you know what you're doing. It was a pain to find instructions about how to do the backup, because nothing is where it was. I wish Adobe made backups easier, I don't dare to update because last time I did Photoshop reverted to factory settings and I don't remember it being a major update, either.

How can I make this "Objects" selection open in a separate flaying window? drag & drop does not work.  2025-11-30_16-05-14.png

Quando eu aciono a ferramenta de Pincel, Borraça ou de seleção, ela cria uma linha como se eu tivesse com o Shift selecionado, clicasse eu um ponto e depois no outro ponto e criasse assim uma linha. Não estou com o Shift acionado, o que pode ser?

Hello, I've had this problem for probably months now and I always hoped a future update would fix it but unfortunately that hasn't been the case, so here I am. I usually draw with Pen Pressure opacity enabled, though I'd love to finetune the sensitivity of it by adjusting the "Minimum" slider in the Brush Settings. Whenever I do so however, it doesn't work and the minimum slider snaps back to 0% once I draw my first stroke. I know I could just adjust my Wacom settings instead, but because that'd cause the pressure sensitivity to change universally across all my other settings (brush size for instance), that fix doesn't work for me either.  Sorry its a bit hard to explain, hopefully this gif provides more insight.ezgif-43f61f42a1bf447a.gif Help would be much appreciated, thank you!I should mention this is Photoshop v26.11.2, though I recently upgraded from v26.11.1 and its already been an issue then as well.  

I tried to jump in what I wanted to do but it didn't work.

Wenn ich aus Photoshop drucke, erscheint neu als Standart "Farbmanagement durch Drucker". Manuell muss ich bei jedem Bild auf "Farbmanagent durch Photoshop" klicken und das ICC Profil neu anwählen.  Weiss jemend, wie ich "Farrbmanagement durch Photoshop" als Standart festlagen kann? (Früher war das so)Danke.

Photoshop 2025 (version 26.11.1) will not open on my Macbook Pro 2019 with Intel UHD Graphics 630 and 16GB RAM on MacOS Tahoe 26.1.I tried with PS 2021 and same problem. On opening I get about 1 second flash of Photoshop opening credits and then crashes.Any advice appreciated 

1 yıllık ücretsiz kullanımı kullanabilmek için chrome eklentisini yükleyip kurdum ama abaşlamadı ne yapmam lazım