Questions

Is it possible to add a location on the map to a movie. For example the coordinates?

Hi there! Title really says it all. When I try to archive a complete project, elements proceeds to ca. 95% and then gives me this error message:  No idea what it means, but what I can say is that that file path does not exist on my computer. Help would really be appreciated.Thanks

For some reason I can no longer delete a clip and close the gap with one mouse click or backspace.  If I want to delet a clip I have to hit my delete button or select "delete" from the dropdown menu to delete the clip and then I have to place my cursor in the gap that was created and right click to get a small button that says "Delete and Close Gap".  I can then click on it and it does it.  That's a lot of extra clicks.  The "Delete and Close Gap" option just below the "Delete" button in the dropdown menu is ghosted, and the backspace just doesn't work.  What has happened here?  Would REALLY appreciate any assistance I can get on this.  This forum has been so helpful in the past!Thanks! 

I am slowly getting the idea of Premiere Elements and so appreciate this community's patient help. Today my question is how to apply an audio as well as video fade between two video clips to smooth out the transition. I have tried opening the transitions tab in video and clicking on various options but I can't quite understand how to apply that in between my video clips. As far as the audio I would just like to fade out and fade in at the beginning and end of each clip, but have not found this option at all. Any help would be appreciated. Thanks Peter

Hello, I have been using adobe premiere elements for video editing since the beginning of the coronavirus epidemic for our organization. At this point, we are stepping up our production value and are going to be using a green screen for chroma key work. After some testing, I found the tool Keylight 1.2 in AAE is far superior to what is in AP Elements. That being said here is what I am looking to do: General video editing and Audio editing (audio is just normalization and an occasional SFXs)Chroma key workBasic color and light grading (our camera is good but the operator isn't perfect (also me :P))Syncing camera anglesPicture in picture workTitles I am wondering what the best way or combination of P Pro and AAE is to achieve this. Someone told me that AAE is really better for Chroma key, but I don't see any audio capability in AAE.  Will a combination of the two programs be best for me? Will just AAE or P Pro work? Thanks for any help. ~Smith

Hello,I recorded some video using "Windows Camera", from my Logitech HD525Webcam. The video plays as it should in any video player, but after importing to Adobe Premiere Elements 14, I have to unlink the audio and slide it across by about 500mSec to regain sync. I'd appreciate your advice on how the problem might be able to be resolved.Cheers,Adrian File properties as shown with Elements: File properties as shown by Windows Explorer: My OS details:Microsoft Windows 10 Home 64 bitVersion 10.0.19041 Build 19041HP All-In-One PC: Model 23-r115aProcessor AMD A6-6310 APU with AMD Radeon R4 Graphics, 1800 Mhz,4 Core(s), 4 Logical Processor(s)Installed Physical Memory (RAM) 16.0 GB    

How to edit multiple cameras in premiere elements 20

I bought Premiere Elements and tried to install it.  But the installer failed over and over again.  So I contacted the support team who pointed me towards the full download.  So I downloaded it but could not extract the files from the zip file.Again, got onto support who told me to use something other than windows explorer.  So I used 7Zip and discovered that there were 9 files in the zip that had CRC errors in them.So again onto support who then game me a refund rather than actually manage the problem.So the next day I try to install again and this time the zip file was still broken but the online installer worked.  Great.But the application crashed on startup.  Back onto support.So this is how that conversation went.Waited fully an hour to get someone.Explained my issue with 2020 crashing.They said, you have 2018?I said yes but I want to upgrade to 2020 but 2020 crashes.  2018 work fine.They passed me onto SALES!  WTF?So I explain to them the i

Question Regarding Pixel Type (1:1 or .91) when adding still images to a SD, 4:3, 720x480 video project in Premier Elements. Consider: For photos, I’ve used Photoshop (full version) for several years; I know the photo functions well ---- but not necessarily matters of pixel aspect ratios for images intended for video.      There is a tremendous (“historic”) article in these forums, posted by former master contributor and guru “Hunt”, about ten or fifteen years ago (I saved a copy). He explained quite clearly that ---- assuming that there will be no still-image panning, just a fixed image ---- use Photoshop to resize photos to the exact pixel dimensions that will be used in Premier Elements (or at least with respect to one of the two dimensions if the image will not fill the video screen).      For example, if working on a 720x480 video project, do not rely on Premier Elements to resize an imported still image (though it will do so)

BonjourDepuis la nouvelle version de windows 10 famille 2004 mon logiciel premiere élément ne s'ouvre plus. j'ai fait une mise à jour du logiciel mais en vain. J'ai réinstallé le locigiel de nombreuses fois.....mais en vainMerci de votre aide

Premiere Elements 15 has been working fine up until now, but now I'm no longer able to create new videos... when I try to Add Media to a New Project I get this message -'Premiere Elements Debug EventPremiere Elements has encountered an error.[E:\Adobe\pre\main\ContentAnalysis\ContentAnalysisHost\Src\ContentAnal'When I click Continue it gives me this message -'Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. Attempting to save your current project.' 

Hi all, I own Premiere Elements 2020 v18 (20200130.daily.2070236) running on Win10 on Ryzen7 2700x and Radeon RX580. Trying to edit HEVC video material from my GoPro 7 I get scrambled preview images after importing media. Previewing these imported videos in small window is ok (only if switching to highest output quality). Previewing in cutting window results in scrambled video as well. (See screenshot attached). Do you have any idea how to solve this issue? I have tried so far to reinstall windows HEVC codec, installing latest video drivers and deleting media cache in Premiere. Thank you very much for any suggestions in adevance!   

If I use the auto pan and zoom tool in Quick mode and then go into manual zoom I sometimes have nice big adjustment frames which exceed the size of the photo.  This enables much more zoom control. This never happens in Expert mode where the adjustment frame is confined by the photo. Also it only happens about 50% of the time in Quick mode. I like the ability to set up zoom using frames which go outside the confines of the photo. How can I do this? Or is some weird quirk that is not supposed to happen. Very useful when it does! 

Can anyone answer this: I put together a short video -- about 5 minutes. But then I "exported and shared" it to my desktop (as an mp4 video), the result was a 10-minute piece. The 1st 5 minutes were the video I created. The rest of the time was just plain black. Does anyone know how I can "save and export" only the lengthof the video I created, without the extra time being added?  Please respond, if you can, toi my email:    [Personal information removed by moderator.] Thanks, -- Ben Martin

Which extention do I import? .macc or .prv or .prel ?  I have so many of these files.

I bought Premiere Elements 2020 and I regret it.I cannot install using the installer.  It crashes at about 8%.I cannot unzip the full installation using Windows Explorer.  Corrupted file message.I can unzip using 7Zip but there are CRC failures in the "products" folder.If I install regardless of the CRC errors, Elements crashes on start.  No error number, just a screen to send a report.Adobe Support may as well be non existent for all the help they have been able to provide.  Below is a list of the files that have CRC issues.products\ACR\AdobeCameraRawProfile8.0All.zipproducts\ECR\ElementsCameraRaw11.3All-x64.zipproducts\EORG\AdobeElements.18Organiser_core.zipproducts\EORG\AdobeElements.18Organiser_core1.zipproducts\EORG\AdobeElements.18Organiser_core2.zipproducts\EORG\AdobeElements.18Organiser_core_AutoAnalyzer.zipproducts\EORG\AdobeElements.18Organiser_noncore1.zipproducts\PRE\AdobePremierteElements.18_core.zip

Hi, does anyone have any ideas? I always get this message when I open Adobe Premier Elements 9.“We have detected an incompatible display driver. To get a better and faster playback performance, please update your display driver. Display driver details: Intel - Intel(R) HD Graphics 2000 3.0.0 - Build 9.17.10.4229“However, I have updated all my computer’s drivers, and video still will not play in APE9 (they play fine in other programs on my computer). My computer is Windows 7 Pro 64-bit. I have also used WinZip Driver Updater, and installed everything that the program recommends and still no luck.As a side note I can see images in Adobe Premier Elements 9 when I click on the image and/or video. But the videos just won’t play.I have also deleted and reinstalled APE9 and that didn’t help, either.

Hello! I have a very big problem at the moment: Since I have a new PC, I can no longer open Adobe premiere elements 15 because I have to enter a serial number. I bought the program 4 years ago for more than 100 € and have made many YouTube videos with it since then. I have no longer this "serial number" and can not open the program. A test version is suggested to me, although I have already installed the paid full version a long time ago. What should I do now? I don't have the serial number anymore. The next thing is, that I can't contakt the adobe support.I would be really happy if any of you have an idea how you can help me .. Thank you!    

I am using Adobe Premiere Elements 2020 - When I used 2015 I would see the top half with a screen of my film and where video is on the bottom - I would see the clips - so that I could add things inbetween. I see a video line but I don't see the clips - how can I see them - I can't find a way to change that.  

this question should be easier to answer.editing win 10,3.3 gh processor16 gb ramssdthis same pc will run a 10p60 video switcher, with 5 cameras and many videos and title sequences.the switcher will record 1080p60 and stream 720p to facebook at the same time.I have cropped clips assembled into the output screen.10 clips on the same output screen, all cropped.the last scene to play the video take several minutes before the screen appears.same if you just put the cursor into the timeline.not rendering, just editing.so I ask what are the actual limitations, like layers, crops imposed by PE.the total total video is about 4:40, less than 5 minutes.and why, with 16 gb, does pe show only 2gb in use?

trying to place and fine position cropped video clips into the frame.ctrl alt  with up down right, leftshould nudge the selected clip into position.they do nothing as far as I can tell.how else to do it?help? 

I create a video with 8 phots (each less than 1 MB) transitions and trailer.  The output file is for mobil users (MP4). In Premier elements 13 the output file is 12 - 13 MB. The same inputs, transitions and trailer is 35 - 40 MB. Cannot not figure out why!

I keep getting a message regarding the file MSVCP.dll is missing.  I am unqble to figure it out. Can anyone help. 

Hello,Could anybody help me and point me to a resource, video, etc?I got Premiere Elements recently and am rather frustrated that I can't find the option for locking tracks, like other video editors offered, to stop tracks from accidentally moving. I would just like to stretch the clips back and forth, but when I do that, the whole timeline moves. The panning & zooming tool is also a problem, I do not manage to find how to limit the time the clip is displayed. Whenever I open a clip, it immediately offers many options and adds new frames which I don't want and lengthens the clip, which I don't want at all, and then it when I close it it throws the whole timeline onward more than I wanted. So I do not know how to use it at all. It was easier with other video editors. Also, when I add a portrait picture, I would like to zoom out to the entire picture, but it does not offer the option, or I can't find it. That is, on the picture added, I would like frame number 2 to be the entire pict

SPECS: Win10, APE 2018, 40gb free space, Intel Core i7-7560U 2.40 GHz, 16gb RAM, 64-bit, Dell XPS 13 SITUATION: I have a video that has a few title slides (I am using the basic text - title option to create headers when I change topics on my video). And I have a 50% transparent grey box below it, so the text is legible on my moving video.   (excuse the low res, hopefully that gives you and idea of the text setup i am describing PROBLEM: They show fine when I am working on it, and after rendering, but on export, the grey box shows up, but no text on top. WHAT I TRIED: I created another project, with one video clip, and then did the same grey box with the same font (font name: "BlackJack"), and that exported without issue. My video file has dozens of videos and transitions, and I have been working on it for over 100 man hours, and it takes approx 8 hours to export, so I can't very easily remove clips and test each time. Any ideas guys? Thanks so much!Mi