Questions

Using the current beta PP but was having issues before on regular PP and older version. Had to export it on my windows desktop at home untlimately. M1 Macbook air on Seq 15.1.1Just can't export, when I export short videos its fine, but when I do long form, usually 1hr long videos it takes over 60hrs to export. I've tried lowering the quality and it still takes forever. Does anyone have and answer to what is happening or a solution to this problem? 

HolaOk, I have a Mac Pro, 64 GB memory and PremierPro 25.1My questions is about MOGRT'sAre these "Babies" always take a huge time to render?And, if I move, place or take out ANYTHING, the Evil RED LINE, appear on top ...There is ANY work around this?orThis is how it works?What or how do you use these if you use it?Help plis !!!

I am finishing a documentary for television which has been shot in UHD Slog3 on a Sony Fx3 and needs to be delivered in HD 50i. As theres no in-camera-sharpening when shooting in slog3 I need to sharpen the footag a little in post and apply a video limiter. I found out that Boris fx BCC has filters for sharpening/detail and a video limiter as premiere plugins but playback performance is FAR worse than using the premiere stock effects. Did anyone use "BCC+ detail" or "BCC+ MagicSharp" or the "BCC Broadcast Safe"? Are they much better then premieres unsharp mask or sharpening in the lumetri panel and premieres video limiter? And are they worth the hassle to render the whole sequence to be able to have smooth playback?

Hey everyone, This is kind of a nit picky question. Is there a way to lose the preview square at the top of each bin? I never use this and it's a waste of screen real estate.I like to have multiple bins open bc my project is huge, and losing this would save a lot of space.  

The standard Match Frame functionality is broken for me. It will match the frame in the Source window, but it does not show the match frame clips' in and outs, and I cannot place in and outs. Or rather, when I match frame, it shows the clips in and out markers briefly, and then they disappear. And if I try to set an in or out marker, it does so for half a second, and then disappears as if I had never done so. I have to find the clips in the Project panel, load that into the Source window and then set my In and Out markers. This is a significant impediment to my workflow, and I cannot say why it is happening. To be clear – I am not double clicking my clip in the timeline to load the clip into the Source window (aka the process that would allow me to make trims in my timeline). I am using Match Frame. I am working in a Production. This happens with multicam clips only. With straight footage, the normal Match Frame behavior resumes. This also does not occur with sequences that live w

Vertical lines appear while playing the video in premiere and when I export the video the lines increase. But when it is paused you don't see those lines. The recording is fine.  

When exporting a video and selecting the file destination, instead of the file exploere popping up, nothing pops up and priemere is effectively soft locked. When trying to select anything else, you get the ding telling you that you need to make a selection in the window however like I said there is no window, this has happened 3 times in a row when doing this and the only thing that seems to help is waiting on the file destination long enough for the preview text to fade in.

I recently decided to give Premiere Pro CC a try and I'm wanting to add multiple effects to a clip that I have masked, but when adding a new effect it adds it to the entire clip and not just the masked portion; is there a way in which to: a) add multiple effects to a masked portion of a clipb) copy a free drawn bezier and apply it to a new effect within the same clip, or do I have to draw a new bezier mask every time I add a new effect?...or am I just being dumb? Any input would be very much appreciated.TD

Hi to all.I'm struggling with adding keyframe interpolation in PP.here is simplyfied code below, I want to interpolate a keyfreme, there are several types of interpolation, but I can't make it work with any of them.var position = app.project.activeSequence.getSelection()[1].components[1].properties[0];var currentTime = app.project.activeSequence.getPlayerPosition();position.setTimeVarying(true);position.addKey(currentTime);position.setValueAtKey(currentTime, [0.5,0.5]);position.setInterpolationTypeAtKey(currentTime, kfInterpMode_Bezier,1);this script adding a keyframe but at last line it gives me an error.HELP!!!

Hi everyone, With a friend we recorded and edited a video clip. We wanted to split the colorgrading part but my friend works on an older version of premiere pro while I'm on the 25 one.To give him the project, I exported the project in XML. In the .prproj file, the colorgrading was done with lumetri in adjustment layers, not directly in the clips. He can correctly open the file and go on with the edit on premiere pro 2021 but the adjustment layers with the colorgrading appear hatched, as when premiere can't find the source of a clip. The colorgrading obviously does not appear.Do you know what could I do to send him tge colorgrading part ? Should I copy/paste the lumetri settings directly into the clips or is there a way to export the adjustment layers separately ? Maybe my question is stupid, I don't even know if it's possible, it's the first time I do colorimetry so any help is more than welcome ! Thanks in advance

I don't have very up-to-date equipment and I made a 1/4 ProRes proxy for the original 4k clips. But despite this, the playback was terrible, it was actually like a slideshow. Desperate, I started rummaging through the software monitor settings, I turned on HQ playback and suddenly a miracle happened - smooth playback returned. I couldn't believe my eyes and turned off the HQ playback back and saw the slideshow again. This illogical circumstance cost me a lot of time and nerves.

Hello! I am trying to track a subject area in content in the video that needs to be fixed. Is there a way to do this?

In Premiere Pro (v25.1.0 Build 73 on Windows 11 computer) and Media Encoder. If I go to export media, select the location. Then try and rename a folder using the explorer dialogue box that comes up... It consistently crashes every time I try. I can go in, hit rename on a folder, rename it, but as soon as I escape the renaming it crashes. Anyone else having this issue? More info:Windows 11 v24H2OS Build 26100.2894CPU: AMD Ryzen 9 7950x3D 16 CoreRam: 64G DDR5GFX: NVIDIA GeForce RTX 3090Hard Drive: Working off a network share - Synology Rackstation over 10gbit fibre, but also happens if I try and rename something on the desktop for example. With is an NVME drive. And same happens on an internal mechanical drive.

Tengo un problema que no me había ocurrido nunca y que me está volviendo loco. Me ocurre en la última versión de de Premiere y de Windows, pero me pasaba en versiones anteriores de Premiere antes de actualizar. El problema es que los archivos que exporto son bastante más grandes de lo estimado, me pasa tanto en h264 como en h265.  A veces incluso probando a bajar el bitrate no bajan de peso. He probado a exportar exactamente el mismo proyecto con exactamente las mismas preferencias en mi ordenador portatil y el peso sí que es correcto, de hecho es incluso menor del estimado. Imaginé que era un problema del equipo asi que lo formateé y reinstalé Premiere desde cero borrando todas las preferencias. Pues no ha servido de nada, sigue pasando lo mismo. No sé si a alguien le ha pasado esto alguna vez y puede ayudarme. Aclaración: En el ordenador que ocurre tengo una 3060 TI y en el portatil una MX450, mucho menos potente.

Hello, I bought a Mac Mini with M4 processor and I need to adjust the size of the interface in Premier pro since I use three monitors two monitors with HD and one with 4K resolution and with monitor in 4K its scale on interface too small and unworkable. its some way how to scale UI on the 4k screen ?  Thanks for answer

there are also problems with the timeline in premiere pro 25.0 is there anyone else experiencing this problem ram:64 graphics card:i am using a computer with 2060 i7 processor

If i want to select for example only three random clips on the timeline track 1 to be rendered for a smooth not choppy playback, why can't i just highlight the clips and hit "render selection" ? The only way i know to do this is to set in and out points and then hit render in and out, however that will then also render usually clips on the above tracks as well which i did want to be included.

Hi guys,Out of no where i am having this issue with my preview monitor. Never had an issue before but what is happening is that instead of my preview monitor opening up full screen on my second screen it opens up half the size and sits right in the middle of both screens!So far i have tried...- Re-launching Premiere Pro cc (latest update)- Disabling and re enabling the reference monitor in preferences/playback- System restart- Double checked my monitors configuration in windows Display Settings.Nothing seems to work...I'm running the latest cc 2018 version of premiere.My monitor set up is as follows.1.  HP Z32x - Main monitor, used for most of the premiere interface.2. HP Z32x - Used as my preview monitor.3. LG HD monitor i use just to see the contents of my project (clips, audio files etc..)My computer:- HP Z840 Workstation- Processor: Intel Xeon CPU E5-2620 v4 @ 2.10GHz, 2.10GHz (2 processors)- 32GB RAM- Quadro M4000 (My 4k HP's run directly from displayport to displayport in to

Hi all I use to export my projects with 'Match Source (High Bitrate)' and 'H.264' setting. After the latest update, it will not let me use this combination.If I choose Match Source (High Bitrate) first it changes H.264 to MPE2.If I choose H.264 first it changes Match Source (High Bitrate) to High Quality 1080pMost of the projects I work on are either 1x1, 4x5 or 9x16 therefore Match Source has alway been working for me and the 1080 will export in a wrong format than the actual project.. Any idea why this occurs? Benny

Estou com problemas em renderizar o video desde a ultima atualização da versão, está dando o erro de anulação de tentativa de substituição de dados após várias tentativas, antes da atualização estava perfeito, isso está me impedindo de trabalhar. Ja tentei mudar para mercury saindo de cuda, mas mesmo assim continua o problema, estou com videos para entregar ao cliente e nao consigo de forma alguma trabalhar, estou com um note com placa Nvidia 4050 e processador Intel Core I7 e 16 gigas de Ram.

buenas tardes alguen sabra por que aparece el error 1609629695

Hi , I am trying to recreate a tutorial for an animated countdown timer using clock wipe transition. However my clock wipe transition is functioning very differently from the tutorial, and I'm not sure where to begin with the fixing!   The clock wipe transition was setup to span over 31 seconds of the countdown, however it only starts after 20s at the 10sec mark. The transition also looks more like a diagonal linear wipe instead of the clock wipe. The transition ends swiftly after 1 second. Everything appears correct in the effect controls however, and the preview of the wipe looks correct too. I was followed this tutorial from youtube:https://youtu.be/q5DhgtNMShU  I cannot find anybody with a similar problem online. Help!!

Issue: We have a problem when trying to import mxf files to premiere pro the first time it's importing but we get the attached error and after that it's not importing at all(also mp4 files cant be imported)Adobe Premiere Pro version number: 23, 24, 25Operating system: macOSSystem Info: Apple M1 ProVideo format: mxfWorkflow details: We use premiere pro with our plugin and using mxf by downloading mxf with ffmpeg.Steps to reproduce:1. create mxf file using this comment:ffmpeg -i <input_url> -vcodec mpeg2video -s 1280x720 -b:v 20000k -maxrate 20000k -bufsize 3835k -minrate 20000k -r 25 -flags ilme -top 1 -acodec pcm_s24le -ar 48000 -pix_fmt yuv422p <output>.mxf2. drag mxf to the bin - shows the error3. try to drag mp4/mxf - dont workExpected Result: we expect everything to be imported.Actual result: cant import files after trying to import mxfwe cant attach file due to security issues.

As seen in the GIF below, I'm simply trying to cycle through my markers on the timeline. Selecting the Next Marker using the Markers window (Or by using Shift-M shortcut) automatically select a clip below as well. This forces the Markers to dissappear as they are markers on the Sequences timeline and not the individual clips.  Is this normal behavior?  Is there a way to tell Premiere not to automatically select clips when I click on a marker?  THank you!! I'm on v25.1 (Build 73)Windows 11

I recently had an issue where when opening premiere it would get stuck on the loading screen and wouln't go further. when creating a crash report it gave me some solutions, these were something with re-granting permission to the documents folder and updating premiere. i first did the permission thing and premiere openend. but in the app all my project files were gone, i managed to find them in finder but when opening all files were greyed out and my custom presets were gone. i found out a new profile had been created, and i do not know what this means or how it happend but everytime i try replacing the files and adding my old presets the app just freezes.