Audition

We have to be able to select multiple tracks at once. Otherwise audition will never be a go to DAW fUnder Review

Please PLEASE work on our ability to select multiple tracks at once. This would be a massive time saver.Thank you!

394228

38 minutes ago

별22976060mk6sParticipant

Recorded audio is faster than playbackOpen for Voting

Audition recordings are consistently faster than the backing track. Matching sample rates, changing interfaces, loopback tests, and ASIO4ALL did not help. Started in v23.5.0.48; an earlier version worked.

6 hours ago

별22976060mk6sParticipant

Adobe Audition records audio slightly faster than the playback at a constant rate, despite matching all sample rate settings and testing different audio interfaces and drivers.

Adobe Audition Records Audio Slightly Faster Than Playback at a Constant RateHello, I am experiencing a recording issue in Adobe Audition's Multitrack mode and would appreciate some help.1. Problem DescriptionWhen recording while playing a backing track (MR), the recorded audio is consistently slightly faster than the playback.The recording does not gradually get faster over time. Instead, the entire recording is sped up by a consistent ratio, causing it to drift out of sync with the backing track.2. Troubleshooting Steps I Have TriedI have tried several troubleshooting methods, but none of them have resolved the issue. Matched sample rates and related settings: I checked and matched the relevant sample rate, Hz, and other audio settings across Adobe Audition, my audio interface, Windows, and the rest of the system. Loopback tests: I performed loopback tests and other diagnostic tests. Changed audio interfaces: I switched to a different audio interface, but the problem persisted.

6 hours ago

Maddie_ZParticipant

Advanced Envelope Tutorials

I would like to begin using the more advanced envelopes under “Track EQ” and “Parametric Equalizer”, but I can’t find any resources to learn how. I have been using Adobe Audition for over 10 years and I have lots of experience using the fade/gain/pan envelopes in a Multitrack Session. Could anyone point me in the right direction? There are tons of tutorials on how to use the basic pan and gain envelopes, but I would like to learn the more advanced envelope features.

171

1 day ago

janebergyParticipant

Audition isn't showing full length of mp3

Hi, I'm fairly new to using Audition so bear with me. So I've been cutting out the commercials from some mp3 files (with Audition 2024) and everything was going fine, but then I get one in which the waveform isn't showing the full length of the mp3. It only goes up to 15 mins and stops. The file length is 3.5 hours. When I open the file in in my Windows media players, they will play the full 3.5 hours just fine. Does anyone know how I can fix this so that Audition shows me the full length of the mp3? Thanks in advance.

4644

2 days ago

CaleMusicParticipant

"Scan for Plug-ins" function failureOpen for Voting

contextual; Several different VSTs installed, OS is Win11, 64bit system, good expensive system, clean installs of everything, is a new pc.Problem: not a single VST can be found.Adobe Audition > VST plugin manager > scan for plugins > “nothing found”Tried everything. VSTs are 64bit, system is 64bit, app is 64bit.tried; Steinberg, Slate drums, and a bunch of others.have read up many others having same issue in forums with no responses or fixes.

475

4 days ago

flatleyd94637298Participant

Recently bought new PC -I had a favorite saved as my VO preset for all my commercials - when i i downloaded Audition to my new PC the 'favorite" setting from drop down menu is no longer present. how do i get it back?

New PC - downloaded Audition through my existing profile from cloud. my ‘favorite’ setting for my VO setting is now gone. How can i get it back with all presets?

171

5 days ago

Ryan264732035qahParticipant

Rodecaster Channel Inputs into Adobe Audition

We currently have two Rodecaster II podcast boards connected to a MacBook Pro and a Macbook Air. After the latest firmware update on the Rodecaster (Version 1.7.6) and updates to each MAC OS (Golden Gate 27 and Tahoe 26) the Channel inputs coming into Adobe Audition are different! For a while now, the audio channels on the Rodecaster are sent to the multitrack output with the attached device and source list. Sources 1 and 2 coming into Audition are Main Mix outputs (L and R) so normally, I would route Mic Track 1 > Input > Mono > Source 3 (Combo 1) for that track. Mic 2 would be Source 4 (Combo 2), Mic 3 would be Source 5 (Combo 3) and Mic 4 would be Source 6 (Combo 4) . However, now the multitrack output from the Rodecaster seems to have 2 sources dedicated to each channel! So Mic 1’s routing works fine but then I need to skip an input selection for the rest of my mics. Figuring this out wasted a lot of my time! Here is the input configuration that got my mics on the proper

822

ycsweetpParticipating Frequently

Batch Route Selected Tracks to Buses & Add Folder Tracks for Session OrganizationOpen for Voting

Title: Batch Route Selected Tracks to Buses & Add Folder Tracks for Session OrganizationMessage: Adobe Audition's Multitrack Editor currently lacks two fundamental workflow features that make managing large sessions tedious: batch output routing and folder tracks. Batch Output Routing to Bus: Right now, routing multiple tracks to a single bus requires manually clicking the dropdown menu on every single track individually. We need the ability to highlight multiple tracks (using Shift or Ctrl/Cmd click) and batch-assign their output to a bus or send with a single click. Track Folders / Groups: Most modern DAWs allow users to collapse multiple tracks into Folder Tracks or Track Groups for session organization. Large multitrack sessions with numerous vocal layers, double tracks, background harmonies, or drum stems quickly become cluttered. Having collapsible folder tracks would drastically streamline visual navigation, timeline management, and vertical zoom efficiency in Audition. Ad

120

ycsweetpParticipating Frequently

Overhaul VST3 Processing & Multi-Threading Engine to Eliminate Audio Dropouts on High-End PCsOpen for Voting

Title: Overhaul VST3 Processing & Multi-Threading Engine to Eliminate Audio Dropouts on High-End PCsAdobe Audition needs a major architectural update in how its VST3 engine handles heavy 3rd-party processing queues.I frequently experience severe audio dropouts, stuttering, and crackling during multitrack playback when using processor-intensive plugins, such as iZotope's Ozone Stem EQ or Cradle's The God Particle. For a long time, I assumed these playback issues were caused by my PC hardware. However, after upgrading to a top-tier, high-end PC, the exact same bottlenecks persist in Audition.Meanwhile, running these exact same plugin chains across multiple tracks in other DAWs (like Reaper or Studio One) runs completely smooth on the exact same machine.Dedicated DAWs handle heavy VST3 suites efficiently by using anticipatory dynamic buffering and balanced multi-core CPU scheduling. Audition's VST host engine appears to struggle with thread allocation and dynamic buffer delivery when

100

ycsweetpParticipating Frequently

Add Copy & Paste for Automation Envelope Keyframes in MultitrackOpen for Voting

Title: Add Copy & Paste for Automation Envelope Keyframes in MultitrackIt’s frustrating that almost every other Adobe app (like Premiere Pro and After Effects), as well as virtually every other major DAW, allows you to copy and paste keyframes, but Adobe Audition still lacks this basic functionality.When mixing a full session and fine-tuning automation for a chorus or hook (volume rides, panning, effect parameters), having to manually recreate every single keyframe point from scratch for the second and third choruses is a massive waste of time and an unnecessary headache.We urgently need the ability to select, copy, and paste keyframe points across clip/track envelopes in the Multitrack Editor. This simple feature would fix a huge workflow bottleneck for anyone doing serious audio mixing in Audition.

FeedbackCommunityMemberInspiring

Ability to copy/paste keyframes between tracksOpen for Voting

It would be nice to copy/paste keyframe placement between tracks. In this case, I changed the levels in certain areas of a music track that wasn't finished. Instead of going back and reinserting said keyframes at the same values in the finished file, it would be nice to select all keyframes in the unfinished file and paste them in the new file. I've tried doing this and all it does is copy/paste the actual file instead of its keyframes.

12726

Megan31611388cpfuParticipant

Clicks on punch and roll in waveform

I am an audiobook narrator and have been recording in multitrack forever, going back and checking every punch in to make sure it sounds okay, adjusting the crossfade, etc. My narrator community has told me this is a huge waste of time and to just record in waveform. BUT EVERY TIME I DO, a small click occurs at EVERY punch spot. I've done everything i can think of to eliminate this, but auto healing these takes more time and effort then simply going back to check my multitrack crossings. Has anyone ever had this issue? These are what the clicks look like every time I punch in, they are noticeable on the waveform and I can hear them. I have it set to snap to zero crossings and I still have this problem.

522

23142430yx8tParticipant

Delete Silence tool detection is wrong when long duration of audio is selected or >500 segmentsOpen for Voting

To reproduce:Open "Delete Silence" tool and select some sane thresholdsSelect ~60 min or longer of audio and click "Scan"Detected silence segments include long sections of audio, as if the thresholds were invisibly changed. The number of segments detected is also much smaller than it should be.If you reduce the audio selection slowly (e.g. from 60min to 50min, then 40min, 30min, etc.) and scan at every duration, at some point, it will start working correctly again. Number of segments detected goes from something like 26 to 498 when I shorten the duration from 34min to 33min. This makes no sense, because it longer duration must have more segments.From the behavior, it seems like when more than 500 segments of silence are present, it gives the wrong result.

1324

9 days ago

eege15Participant

Seventh Heaven not rendering

Hi all. Just wondering if anyone else is using the Liquid Sonics 'Seventh Heaven Professional' plug in and having any issues?When I try to bounce down a mix the plug-in effect / audio isn't bouncing  with the rest of the stems. Any thoughts? Latest version of Audition. Mac Ventura 13.7.4

1442

11 days ago

Mystic_fun5a13Participant

i need to turn off the vertical white lines in audio files in Adobe Audition CS5.5 any time I position my mouse pointer in a given audio file

Anytime I position my mouse pointer to a different position in an audio file (in Adobe Audition) and left click the mouse a vertical line gets created in the audio file .audio file. Those lines totally screw things up in general. e.g.; The playback volume is changed and it’s a total pain to get rid of them. They only started appearing recently and I have checked al preferences, but found nothing that turns them off. My install download appears to be dependent upon the Adobe Creative Cloud but when I run iit to re-install the app, this version (CS5.5) is not available. A fix is urgently needed. Please advise. Thx.

362

12 days ago

FugitiveVisionInspiring

Problem with LP transfers

I produce a weekly radio series (Analog Masters) devoted to classical LPs and 78s. I regularly use Audition to transfer audio from the original source to a digital format. Since the most recent Windows update (late August 2026), I have noticed an audio problem that was not previously audible. Natural fades (such as at the end of a movement) are no longer smooth. One or more ‘bumps’ in audio level are noticeable as the last note fades. I use a Behringer U-Phono UFO202 unit for analog-to-digital conversion. My computer is a recent Dell running Windows 11. I had the most recent version of Audition, but as a test I reverted to 25.6.6. This did not cure the problem. I have also restarted my computer and double-checked all audio settings. Is anyone else experiencing this issue? Any suggestions?

869

12 days ago

Sandy31204404ui2aParticipant

free_adobe_read_context shuts down a tokio runtime from a DLL-unload / atexit destructor, which isn't safe during ExitProcessOpen for Voting

After importing a file in Audition (26.5), when I close the application, the audition.exe and crashpad_handler.exe processes remain running forever. AI reports the problem to be an Adobe bug:free_adobe_read_context shuts down a tokio runtime from a DLL-unload / atexit destructor, which isn't safe during ExitProcess. It should use a shutdown with a timeout (tokio's shutdown_background or shutdown_timeout), or skip that cleanup when the process is already shutting down.Repro:Launch AuditionImport an .mp3 fileClose Auditionconfirm these processes never end: audition.execrashpad_handler.exe

13 days ago

TROZANMEParticipating Frequently

Feature Request: Workflow & Customization Improvements for Adobe AuditionOpen for Voting

Hello Adobe Audition Team,On behalf of professional audio editors across post-production, broadcasting, animation, music, and podcasting, we request several key features that would make Adobe Audition more competitive and efficient for large-scale audio work.Audition is already a reliable DAW for editing, mixing, and restoration, but there are modern workflow tools present in other professional audio software that would significantly speed up production and organization for thousands of users.Requested FeaturesBins / Folder Structure in Files PanelCreate and manage folders (bins) in the Files panel to organize assets like Voice, SFX, Music.Drag-and-drop between bins, search inside bins, and filter by tags.Track Folders with FX InheritanceCollapsible folder tracks to group related tracks (e.g., all character voices, or all ambient SFX).Apply effects, automation, or routing at the folder level that affect all child tracks.Per-Clip / Per-Item EffectsApply effects directly to individual cl

2615

18 days ago

EyeCreate2024Participating Frequently

I'm still waiting for beatmapper to help with mixing tracks for social.Open for Voting

Not everyone has access to a keyboard or synths. So track loops can help create music tracks for the rest of us. But a “beatmapper” to match beats is sorely needed to help with the mixing, in order to match beats of different music clips (loops) to pull a music track together. I used to love this feature in Sound Forge within the composition window. It’s not all about podcasts and editing voice. ;)

18 days ago

Mohau_Logistics6811Participant

my audition displays stereo tracks as if they were mono

i think i may have misckicked somemething, all of my audio was in streo and half of it turned into mono, i tried going to Edit > Convert Sample Type, set Channels to Stereo, and click OK. and saved and it still displays them as mono even when they are shown to have a left and right channel in the files panel please help, im a bit on a newbie, so i dont understand everything

896

18 days ago

jose32637501e786Participant

videoOpen for Voting

Im working on a translating voice over project. the video reference with the audio track im translating freezes and goes black, audio keeps playing but nothing shows on video panel. i need to see the video to make sure i am doing the voice over properly. any ideas as to why it happens?it will start playing good and about half way through it stops. i listen to the audio only to do voice over but at times it wont match the video. for example they pointed to the camara to talk to audience i didnt know and it was way out of sync. 

2095

21 days ago

timacheffParticipant

Audition crashes every time I try to open it, even with multiple re-installs and restarts. Generates files as seen in screen shot.Open for Voting

432

25 days ago

DennisB_PBS-NCParticipant