P: UPDATE: Bug Fixed - This is a list of different post with the same Multicam Problem, please help.

[Jorge Jaramillo Hdz]

--------------------------------

UPDATE

Problem Fix in 23.6

I just finish a 1-hour long project in multicam with any problem at all. The bugs seems to be completly gone, my edition was smooth. Actually now it run much better the video, sometimes with not even a dropped frames. 

Thanks Adobe.

---------------------------------

Hi, this is a compilation of the same problem posted by different users (two post are mine, but inside there is more people with the same problem).

The problem is this: Multicam monitor dissapears and only shows the preview, not the multicam

selection.You can see inside every post the glith/bug explained.

We need a solution, editing in multicam is extremly annoying with this bug.

Upvote if you have the same problem.

Merged Threads:

https://community.adobe.com/t5/premiere-pro-bugs/problemas-con-edici%C3%B3n-multic%C3%A1mara/idc-p/1...

https://community.adobe.com/t5/premiere-pro-bugs/multicam-keeps-going-back-to-programme-view/idi-p/1...

https://community.adobe.com/t5/premiere-pro-bugs/alguns-problemas-s%C3%A9rios-com-multicam-para-quem...

https://community.adobe.com/t5/premiere-pro-bugs/multicam-view-in-program-window-bug/idi-p/13850369

https://community.adobe.com/t5/premiere-pro-bugs/multi-camera-view-stops-showing-the-different-camer...

https://community.adobe.com/t5/premiere-pro-bugs/multicam-monitor-bug-only-showing-one-camera-regula...

https://community.adobe.com/t5/premiere-pro-discussions/this-should-have-been-posted-as-bug-multicam...

https://community.adobe.com/t5/premiere-pro-discussions/multicam-bug-premiere-pro-23-4/m-p/13822570

https://community.adobe.com/t5/premiere-pro-bugs/multicam-editing-now-a-pain-as-it-is-constistently-...

[Kevin Velghe]

I have this same issue! What the... !!!

This is killing my workflow!

Adobe please fix this...

Kevin

[nickpaulwhite]

Same with me. Saw another thread where they suggested transcoding to ProRes. Trying that now.

[nickpaulwhite]

So, I've transcoded my files to Pro Res and then set the Multicam Sequence Setting Video Preview to Quicktime (matching resolution of clips) and it seems to be solving the problem so far.

[nickpaulwhite]

Spoke too soon. Problem came back.

[Rafael17]

Sou montador a quinze anos no Brasil e vi parte do mercado broadcast mudar do Media Composer para o Premiere. Porém, tenho me deparado com alguns problemas técnicos do programa que são muito sérios quando a gente fala de produção de TV profissional.

Acredito que o maior deles é o multicam. Estou trabalhando num reality de 45 minutos de duração e 12 câmeras. Quando minha timeline passa dos dez minutos o Premiere é incapaz de ativar a visualização de múltiplas câmeras. Quando entro no modo multicam, o sistema simplesmente não carrega. Eu não consigo fazer ajustes de imagem quando eu estou juntando os VTs e finalizando o episódio. Este é um problema que eu ainda não vi ser relatado nos fóruns, sempre que procuro por "problema ao acessar muticam"ou algo do tipo eu caio em soluções extremamente simples e de iniciante como não habilitar a track e vídeo para ativar o multicam. Problemas de quem editar projetos pequenos ou mesmo amadores.
Outro problema que eu me deparo e este é até com projetos pequenos é quando o sistema de clicar nas câmeras para cortar simplesmente para de funcionar, me obrigado a reiniciar o Premiere.

Outra reclamação que faço é do plugin de estabilização. Até o Edius possui um pluguin melhor, não é possível que ano após ano vocês não façam nada com relação a isso. O Plugin é horrível, tenebroso, a gente é obrigado a recorrer ao Resolve toda vez que precisa estabilizar um plano sem que ele apreça uma gelatina. Daqui a pouco vocês vão estar inserir plugin de AI que edita sózinho, mas ainda não entregar um estabilizador decente.

Esse bug que torna impossível acessar o multicam para timeline longa com muitas câmeras está fazendo a produtora que eu trabalho considerar adotoar o Resolve para a próxima temporada, o que é uma pena, porque eu vejo o Premiere cresce dia após dia. Mas, sem resolver problemas de desempenho básicos como esse, vai ser difícil o mercado de broadcast adorar o programa como sendo o padrão. 

[dhtbrowne]

Pretty sure this is a bug because I've never had this error before. And when cutting this multicam piece in early May it was fine so guessing something has broken with an update.

Here is a screen recording of the issue:

https://www.loom.com/share/5a87be16940c4ba8955c92484de18fbd?sid=57f428ac-b07f-40b5-ba14-434ec31419c1

It seems to be when I scrub in the timeline, when multicam is turned on in the programme window, it only shows the programme stream (ie the final edit) and hides the multicam view. Then when I click on the programme window the mutlicam comes back up again but it's laggy. I stop play again it works fine, but when I scrub in the sequence it goes back to only viewing the programme stream again. Super frustrating and it's not how it used to work.

[Jorge Jaramillo Hdz]

Premiere Pro 23.5 The bug is still here.

So I think it's a new bug we'll have to deal from now, just another bug in the list that Adobe will let to be there for months or years.

Adobe is pushing us really hard to leave Premiere "Pro".

SIGHT

[Jorge Jaramillo Hdz]

Up voting, same problem, I did a bug report almost two months ago but they didn't even care at least to response, new bugs every new version. They are forcing us to leave Premiere "Pro"

https://community.adobe.com/t5/premiere-pro-beta-bugs/multicamera-view-not-showing-camera-angle-sele...

[Jorge Jaramillo Hdz]

Up voting, same problem here, I reported the bug almost two months ago, but they don't even response:
https://community.adobe.com/t5/premiere-pro-beta-bugs/multicamera-view-not-showing-camera-angle-sele...

[Ds_operator]

Same here, Premiere 23.5 but did that since 23.4. Change drivers on Nvidia Quadro M4000 to latest studio build as today and its really time consumming having to do this. No client attended sessions on premiere until this is fixed

[Jorge Jaramillo Hdz]

I've tried with proxys and the same problem. I don't know what to do, haven't found a workaround. 

[Neckebba]

you need to add what foortage... is it with all ?  

[GreatJobTommy]

I just want to add a Soluition I solved for my Project. Multicam wasn't showing the 9 different cams in multicam monitor anymore, even if I activated them in the settings (in multicam view/wrench icon) > edit cameras... If you got one or multiple multicam sequences in your project and you forget on one of them to activate your layers inside the multicam sequence (the blue highlighted on the left side of every layer for example V1,A1,V2,A2) all other multicam sequences can get confused and so the muticam monitor breaks. Just highlight them all and you should be good to go. If it breaks again, it helps to have the MC-timelines open as well and you have to jump inside of them and go back to your Main timeline. Its not Perfect but a solution for the time beeing.
Hope that saves the hours of pain researching about this multicam error I had to figure out myself. Cheers!

[Carlos Acabose]

Hola!!

Después de la última actualización (23.5.0) tengo problemas con la edición multicámara, con la que trabajo mucho.

Utilizo la pestaña de conmutar vista multicamara, así tengo divido el monitor. A la izquierda, las imagenes de las cámaras para elegir plano, y a la derecha, la imagen final del montaje.

Siempre ha funcionado perfectamente, pero desde la actualización, cada vez que hago alguna corrección en la linea de tiempo o pulso STOP para pausar el montaje, me desaparece de la parte izquierda los monitores de las diferentes cámaras y se me queda solo la imagen del montaje en curso. Tengo que pulsar cualquier otro icono y volver a pulsar el de conmutar vista multicámara.

No se si le pasa a alguien más y como podrÍa solucionarlo. Esto hace el montaje muy dificil, ya que ralentiza mucho el proceso.

GRACIAS!!

[cls1976]

I'm experiencing the same issues here with version 23.5. Downgrading back to 23.3 and hopefully I can get work done. Love the fact that 23.5 auto saves in the background but if the trade off is a jacked up multi cam then it's a bum deal. I hope Adobe fixes this soon.

[Jorge Jaramillo Hdz]

I've been updating PPro Beta hoping there is a fix, no luck. The problem is still here, and to be honest what annoying most it's that nobody in Adobe seems to care even to response this and other post with the same problem.

The software is in their worst era (bugs & crash talking) and seems that they don't care.

[Jorge Jaramillo Hdz]

Tengo el mismo problema, ya lo he posteado aquí en diferentes ocasiones y ninguna persona de Adobe responde. Es un problema que también lo vi en el grupo de Facebook.

[Bruce Bullis]

> Steps to reproduce:
>    1. Editing in multicam view.

That doesn't reproduce any problem, on multiple test systems, here.

GreatJobTommy's solution looks encouraging. Did you try it? What did you find?

>The software is in their worst era (bugs & crash talking) and seems that they don't care.

I'm not sure what's telling you that...? Regardless, we care.

If you can provide steps that reliably reproduce a problem, we're happy to pursue it.

About that 'worst era': For quite a while now, each new release of PPro has had fewer bugs and crashes than the previous. So, while all software will always have bugs forever, the current release is the best PPro has ever been. 🙂

[Jorge Jaramillo Hdz]

Sorry if Im harsh, but I'm really frustrate that sometimes I expend more time trying to deal with an annoying bug or looking a workaround instead of doing my job wich is edit videos not beta tester.

Quoting:

"> Steps to reproduce:

> 1. Editing in multicam view.

That doesn't reproduce any problem, on multiple test systems, here.

GreatJobTommy's solution looks encouraging. Did you try it? What did you find?"

Yes, I've been trying anything I've read.

Also I did a report listing all the post I've found with the same problem (I don't know what else should I do), maybe there you can find sometime that helps you to understand the problem. 

https://community.adobe.com/t5/premiere-pro-bugs/this-is-a-list-of-different-post-with-the-same-mult...

Thanks.

[Bopfish]

Upvoting as well. This problem shows in beta 23.6 and release versions 23.5 and 23.4 but not in 23.3. Unfortunately, the lag problem shows in 23.3, choose your lesser evil I suppose. All my footage is proxied so this notion of transcoding your footage before editing is less than ideal, to put it nicely.

[kit.kohler]

I am having playback issues with multicam edits in Premiere Pro. Multicam view is not displaying my cameras, either while stopped with a playhead on the sequence, scrubbing, or playing back. When playing back, I can briefly get the multicam view to come back if I keypress a 1 or 2 to switch to the camera angle, but the second I stop playback the view reverts to a single camera angle view. See video, attached.

I have tried closing and opening the app and have switched views from composite back to alpha. It is even having issues displaying multiple camera angles when I open the MC sequence in the source monitor.

This is a brand new Premiere Pro install on a Brand New Mac Studio M2 so miss me with that "reset your cache and dump your preferences" thing. After all the bugs I've dealt with in Premiere I really want to believe that Adobe is stepping up for working editors, but this makes me doubt it a lot.

Running 23.5.0 Build 56.

[Jorge Jaramillo Hdz]

It's now a well know bug, at least for us, the users (or more like Beta Tester, wich it's like we are now), for Adobe seems like it's not important.

I post this with a list of different post talking about the bug/glith, but they just ignore it.

https://community.adobe.com/t5/premiere-pro-bugs/this-is-a-list-of-different-post-with-the-same-mult...

[kit.kohler]

I've included a video capture of the bug over in my report. I didn't see Jorge's until he brought it to my attention.
https://community.adobe.com/t5/premiere-pro-bugs/multicam-view-breaking-in-latest-release/idi-p/1394...

I'd like to note that it's not actually returning to composite view -- you can tell the difference by the black around the frame instead of the gray you get when you're viewing a composite frame. It's just not displaying the other cameras.

A flush of cache and preferences and a reset did help a bit, but it's still popping up. These are the kind of bugs you can't reliably recreate which makes them so frustrating. But Bruce -- gas lighting us by being like "Premiere Pro is better than ever! ;)" is not a good look for a company that claims it's taking seriously the stability issues folks have been complaining about for at least half a decade.

If you want to stop hemorrhaging professional editors, we want less unwarranted positivity and more visible improvements. Stop rearranging deck chairs on the Titanic and start bailing out water.

[Todd_Reeder]

Hello,

For those that are hitting this issue, how did you create your multicam?  specifically, did you select the clips in the project panel, right click and select create multicam?  and if so, what sequence settings did you use?  Camera 1, all cameras, or switch audio?  Also, if you go to your general project settings, what is the renderer set to?  Are you using transmit when this happens? if so, any chance you can post a screen shot of your playback prefs?  lastly, can you click on the wrench in the program monitor and take a screenshot of that menu?  I so far have not seen this, but would love to get it figured out.

Thanks!

[TangiblePlanet]

I have the same issue, I have a dealine, this in infurating. I pay $600 a year for thie software and my livelihood dpends on its function. Why does every single update have to introduce another workflow breaking bug. I really REALLY love Premiere, I am TRYING to suipport it but jesus christ, it's like every update is another MAJOR issue. I get little bugs here and there but come on man. I have to finsih this project tonight, and i'm leaving the state tomorrow. This is ridisculous.