Re: Change label color Creative cloud Library impo...

RobShultz · ‎Jul 25, 2017

Hi: If you close After Effects with the color changed, it will remain changed the next time you open After Effects on that machine.

RobShultz · ‎Jul 25, 2017

Are you selecting all of the cuts in your multicam sequence? You could do a marque select over all of the multicam cuts and audio and copy and paste in to the new timeline.

RobShultz · ‎Jul 25, 2017

You can try rendering the problem section. Set in and out points around the section then press return. If it needs rendering this will show the rendering progress and then it should play better.

RobShultz · ‎Jul 25, 2017

I think that you're looking for the legacy title option. You can now access the previous titling tools by going to file/new/legacy title. The new version of Premiere has a title tool in the tool bar and a new window called essential graphics option

RobShultz · ‎Jul 25, 2017

Yes, you can highlight the clip in the timeline and then go in to the Effects Control Panel, twirl open motion and scale it up a bit. You can put in and out points around the clip and export it for a test. The in and out points will cause just that clip to be output.

RobShultz · ‎Jul 25, 2017

The green line is just crazy. Maybe you could try a sligt scale up , on the footage where you see the green line, to see if that helps.

RobShultz · ‎Jul 25, 2017

Strange behavior. Sounds like a functionality behavior between the mouse and Premiere. Not sure how to fix that but a couple of other options would be to point the mouse at what you'd like to zoom to/from and hold down option or alt and roll the mouse wheel to zoom. You could also tap plus or minus on the keyboard to zoom to/from where the timeline indicator is.

RobShultz · ‎Jul 24, 2017

V has always been the keyboard shortcut for the selection tool. I agree that the new text tool has a different feel to it and will take a little getting used to.

RobShultz · ‎Jul 24, 2017

I'd look in to converting with the Handbrake app.

RobShultz · ‎Jul 24, 2017

I would recommend applying the the blur to an adjustment layer above your footage above the footage you're tracking. You can razor tweak the size of mask and then razor cut the adjustment layer when the person you're masking is totally behind the person passing in front. Then re-track the mask after that person has passed. It is a slow process but this may save you some time.

RobShultz · ‎Jul 24, 2017

You may not be close enough to the end of your subscription. I believe you can only cancel when your current contract is close to ending. (Not my rule.) I'd recommend reviewing when your membership ends. Also call Adobe for more information.

RobShultz · ‎Jul 24, 2017

I'm glad that this works! The steps that you're taking in the timeline seem correct so I'm not sure why this work-around is necessary. Maybe a different frame rate on this footage than the sequence? Regardless. Happy editing!

RobShultz · ‎Jul 23, 2017

If you are on a Windows machine you might want to try installing the Quicktime player.

RobShultz · ‎Jul 23, 2017

I don't believe that Premiere will do this for you. If, before you delete the project you can highlight the files in your Project panel and then right click/reveal in Explorer (Windows) or Reveal in Finder (Mac) and the windows will open up which hold the files. This will get you the locations and I do believe that you have to delete them manually.

RobShultz · ‎Jul 23, 2017

If the clip is in the timeline, have your time-line indicator that you want the marker on then you can press shift/r to get the frame that you want in the source monitor. Then press "M" in the source monitor. This should place a marker on the clip which should also be visible in the timeline. Hopefully this will help out.

RobShultz · ‎Jul 23, 2017

Are your audio meters jumping? Double check your output Premiere Pro/Preferences/Audio Hardware (Mac) or Edit/Preferences/Audio Hardware (Windows)and check the default output.

RobShultz · ‎Jul 20, 2017

I don't know if you're on Windows or Mac. If you're on Windows try installing a Quicktime viewer. This cures a lot of ills like this. https://www.apple.com/quicktime/download/

RobShultz · ‎Jul 19, 2017

Are you doing a razor cut? Then right click on the clip and select speed duration. Then check reverse speed? I just tried this and it seemed to be working properly.

RobShultz · ‎Jul 19, 2017

Try typing the name of the template in the Effects/Presets panel and applying it from there.

RobShultz · ‎Jul 19, 2017

The gentlemen above are right. If you're in After Effects the razor tool doesn't exist.

RobShultz · ‎Jul 14, 2017

Try holding down Command (Mac) or Control (Windows) when you use the eyedropper. This picks a range of 5 x 5 range of pixels. Hopefully this helps.

RobShultz · ‎Jul 14, 2017

I recommend downloading Media Encoder from Creative Cloud Account. Media Encoder has a pre-set with this frame size for h.264. When you have Media Encoder installed you can click Queue from Premiere's Output window (the one that you just showed a picture of. In Media Encoder the lower left will show the pre-set area the one that you want is under Devices/Apple. When queued your footage to media encoder it sent it to the Queue panel in the upper right side of Media Encoder. Youi can drag the preset from the preset panel on the the blue lettering/path in the Queue panel. That will apply that pre-set. You can also change the path under output file in the Queue panel. These optimized pre-sets work very well and will probably accomplish what you what you need. Plus they're easy to use.

RobShultz · ‎Jul 10, 2017

Or use point tracking in After Effects and save yourself a ton of time and grief.

RobShultz · ‎Jul 10, 2017

Are all of the files conformed? (No blue progress bar on the lower right side.)

RobShultz · ‎Jul 10, 2017

I don't believe so. Premiere considers the "in point" as the start of your edit so I don't think that there's a way around it.

RobShultz · ‎Jul 10, 2017

You can highlight the clip in the timeline, go to the effect controls panel and select the word motion. When you do this you will see the blue circle (Anchor Point) and you can drag the Anchor Point on to the point that you want to be fixed. This will do it for that clip in the timeline. If you need to apply this to other clips in the timeline you can select the modified clip. Copy it (Edit/Copy) and paste attributes, (Edit/Paste Attributes) on to the other clips; make sure that the motion tab is selected.in the paste attributes box.

RobShultz · ‎Jul 10, 2017

Maybe if you let us know what you're trying to accomplish (end result) it would be easier for us to come up with a solution.

RobShultz · ‎Jul 10, 2017

You may want to try cleaning your disk cache from the top menu: Premiere Pro/Media Cache/Clean Unused.

RobShultz · ‎Jul 08, 2017

Try dragging them in to the project panel and see if you have a different result.

RobShultz · ‎Jul 08, 2017

You might want to try converting the keyframes to Hold Keyframes (Highlight them/right click/Toggle Hold Keyframe.) Then see if this result is acceptable.

RobShultz

RobShultz

Activity

Re: Change label color Creative cloud Library impo...

Re: Using a multicamera sequence into a normal seq...

Re: Sequence & Timeline Glitchy

Re: I Don't Have My 'Title' Option

Re: Green Line on the right side after export???

Re: Green Line on the right side after export???

Re: How to make the Cursor in the time line scrub ...

Re: Essential graphics - Am I wrong or did the Esc...

Re: Out of sync of audio in Premiero Pro

Re: mosaic face blur... when tracking it switches ...

Re: How to diasble my Premiere Pro Membership, lin...

Re: marker madness!

Re: Premiere Pro stop playing footage.

Re: Removing unused project files from hard drive

Re: marker madness!

Re: No audio playback / Cache Already cleared

Re: The file has no audio or video streams (AVI)

Re: Reverse speed effect issues.

Re: After effects Bridge error

Re: Premiere Pro CC 2017 No Razor Tool

Re: Eyedropper not working in Premiere Pro CC 2017...

Re: Edited MP4 file size increases dramatically af...

Re: Is there "center" feature in Pr?

Re: Sound layer delay after unpause, timing to wor...

Re: Bypassing in/out points on the Timeline

Re: Is there "center" feature in Pr?

Re: Is there "center" feature in Pr?

Re: Premiere suddenly starts lagging a lot

Re: After Effects cc 2017.2 crashes Windows 7

Re: Single-Frame Opacity Changes Don't Render