Using the Community

Good evening.When the private message is unread,it will notify you on the screen, but when there is unread in the notification feed,it is difficult to understand because there is no edge on the screen (when Jive was notified).Khoros　　　　　　　　　Jive Especially when email notifications are turned off, it may be difficult to understandthat there was a reply or praise. Since it is not necessary to display the number of messageslike a private message, it would be helpful if you could let us know on the screenthat there is some unread notification.

As far as I can tell, there is no longer any way to link to an individual message within a thread. The date/time of each message itself is not linkable, as is customary on discussion boards, Twitter, Facebook, etc.   In addition, the messages are no longer numbered either (as they were before), and may be collapsed.   So... how do we direct a customer to a specific place within a long discussion? This is important.   We really need a method to get back and refer to an individual message within a Forums thread (with URLs and/or numbering), as there used to be! Thanks.

The following thread:https://forums.adobe.com/message/6847421#6847421 - What is best practice to use Acrobat Standard on a Terminal Serverdoesn't seem to exist anymore on this new forum. Is there any way to find this back or if not, can the solution to this question be posted again please? Tried the Wayback site, but no luck there.

More of a "nice to have" than a critical need, but it would be nice to see the name of the person who creates a new thread in a community as part of the information shown on the community page. It can't be that hard to do, since it's done when an answer is marked correct.  

The verticle line to the left of the unread posts in the Notification Feed should remain there if the reply has not been read, but if you go to the Notification Feed, don't view any of the replies, and then exit or go to another thread or site, upon returning it no loner is there to indicate unread replies. For example: Without clicking on the unread message and returning to the Notification Feed:  

In many threads screen dumps form users are the key of being able to help users. In the old forum people could upload images and one could easily *see* the parameters in let´s say the Export Settings dialog in Premiere Pro.   If someone upload an image today it is impossible to see any setting. If i click the image it is actually smaller than is i look at the picture in the thread. It seems that the new forum do similar to what Facebook do, iow it scales down images to a size that are predefined but unfortunately impossible to use.   In this thread the TS answers byroncortez but it is impossible to see the details of the Export Settings used by the TS: Glitch on 4K footage in 1080p sequence   Try to read the frame size and other settings from that picture. This must be solved asap.

Hi   I got this email today   Adobe Support Community   Hi NB__colourmanagement,   A post was made on the Community Help board you follow.     No Colorsync Folder   I'm trying to add ICC profiles for my Canon Pixma Pro 100, but I don't have a ColorSync folder. How do I add this? Or am I missing something?     Alyshalynng17       Oct 23, 2019 11:55 AM       Reply to this message The OP's message seems to have been moved from this board to colormanagement maybe that’s why the links in the massage above don't work I did find it by clicking the user name and going from there   can it be fixed?   thanks neil barstow, colourmanagement

I think there are cases where you post by mistake, but is there anyone who knows how to delete it?I accidentally posted (replyed) this time, but I'm having trouble deleting it.   日本語：投稿や返信をした文書の削除方法 誤って投稿してしまうケースはあるとは思いますが、その場合に削除する方法を知っている方はいるでしょうか？今回、誤って投稿（返信）をしてしまったのですが、削除できなくて困ってしまいました。

 Hello everyone.I replied to the following post last night, but when I looked at it this morning, the reply seemed to be erased. What happened?https://community.adobe.com/t5/Get-Started/%E6%AA%94%E6%A1%88%E9%9B%B2%E7%AB%AF%E9%80%A3%E7%B5%90%E7%84%A1%E6%B3%95%E4%B8%8B%E8%BC%89/m-p/10690111#M437714There were other people who responded to me, but only certain replies related to cloud use in China are not visible. Both were linked to a post that mentioned the forum's use of the cloud in China.Is it subject to moderation if you touch specific content such as China?

The whole idea of consolidating forums across languages has some difficult spots.   One is the "translate" function itself.   If there's more than 2-3 words of English in a post clearly written in another language, it refuses to translate saying "it is already in that language".   So a post in Japanese characters or Portugese with "think pad" and "Selection" ... won't translate.   Neil

By breadcrumb trail, I mean this sort of thing:     If I'm 5 pages into a thread and at the bottom of the page after multiple posts and want to go back to the community page, I do not want to have to either scroll all the way UP the page to get to the link back the community page nor do I want to have to click on this and then rework my way back down to the community page, especially since the communities I'm in are generally not listed in the Popular category, so I still have to filter what's listed.   My current workaround has been to create bookmarks, but that oughtn't be necessary. The banner at the top should always tell you which community you're in and let you travel back to the main page for it without all the shenanigans.

Please get rid of all those blue buttons or make the post/answer stick to the bottom of the thread and not somewhere in the middle.  

we are trying to load data in to campaign but due to some reason we are getting xml tags for the product name like xxproductname and we are having it as <span class="xxx">xx</span>productname.how to remove the xml tags and update the product name in ACC and have final output as xxproductname?

How do I read replies to my enqiry?  Whenever I try all I get is 'message not found'

Hi, Got a mail from the forum: Date: Sep 26, 2019 05:03 AM Did it solve your problem? Click here to view the replies and mark one correct. This helps others find helpful answers in the community too! Where can I mark a question as "solved" or "Correct" as mentioned above? Must be totally blind or something is missing?/Daniel

When forum emails stopped, two forums I follow (RoboHelp and Back Room) also showed a Follow buttion instead of Unfollow. The email problem has been fixed but the buttons are still wrong. In another thread someone is having the same problem with the check box, untick it but still the email comes through.   The problem does not occur in other forums, at least, not for me.  

Why can I create posts without replying to other people's comments?  At first, I saw the blue reply button, but when I press the blue reply button, the blue reply will turn gray or disappear, and no dialog box will appear. I log in  China. The problem is that there are restrictions on Chinese Internet? 

The Premiere Pro forum has Character Animator on the right as a Related Community   https://community.adobe.com/t5/Premiere-Pro/bd-p/premiere-pro   Character Animator has nothing to do with video editing   Please remove Character Animator from the right side of the page

Since the adobe support community website was updated, I have been unable to display the posts of each software page every time I enter. And I can create post normally, but I can't reply to my own post and others' comments. I've also tried the latest versions of Firefox, Google Chrome, Safari and ie11 4 browsers, all of which have this problem. At the same time, I also try to replace other computers and networks. The problems are the same. What's the problem? Is this my account setting problem?

Why can I create posts without replying to other people's comments? At first, I saw the blue reply button, but when I press the blue reply button, the blue reply will turn gray or disappear, and no dialog box will appear. I log in China. The problem is that there are restrictions on Chinese Internet? Or is there a problem with my operation?

Hi Folks,Maybe someone here can help me out. My recent queries to the community have been answered, but in all cases all I can do is "like" the response--there is no "approve" or "issue resolved" or "correct answer" button for me to choose on the page. So, of course, I keep getting emails asking me to mark an answer as correct.  If someone could please tell me how to go about closing a query that would be wonderful.

  Does not look English to me.

Big issue is, as I have said time and again, Nested replies. They have to GO the sooner the better. Now other stuff   1. The main list of forums need to be listed in Alphabetical order. This Popular stuff is just ridiculous and Stupid. Popular to who/what. When someone comes to this forum they are looking for help with a specific Adobe program. So having a list of those programs in alphabetical order just makes sense. Popular is fine if this was a Social Media site but it isn't. It is the main Adobe Support site.   2. An actual description of what each forum is for. OK maybe that isn't needed for program/forum like InDesign, Photoshop, Illustrator and the like but the Get started forum, which is on top in the Popular sort order, get a lot of posts that should not be there, IE for other programs.  So for forums like the Lounge, Community Help, Community Feedback and maybe a few others need those descriptions.   3. when going to a forum you need to list the usern

I wished several times to answer a discussion, to discover I was answering a post... Getting the blue reply to thread button at the bottom would alleviate the problem. Also, One needs to scroll back up to reply, it is unecessary friction It might be an intermediate step that would reduce the nesting threads appearing all the time.