After Effects

Noise Default effect is missing in the latest After Effects update on my computer. All the project I created with older AE versions report the effect as missing. Checked in the Effects&Presets panel and the effect doesn't appear (printscreen attached). Anyone else noticing the same issue? 

Roto Brush is acting really weird with this specific clip. After I make the first selection, I can't select or deselect anything unless I switch back and forth between versions. For example, I can make a selection with version 2.0, and I can only change the selection if I switch to version 3.0, then switch back to version 2.0. Switching between any of the versions yields the same results. The clip is pre-composed because that's how it was when I found this. I tested it without pre-comp and it does the same thing. This is a linked composition with Premiere. I tried making a new, unlinked, composition and it ended up working just fine then. So, it could be an issue with dynamic link but I don't know. Any input is appreciated!! See attached clip for what I mean. https://youtu.be/QUhC32NeM7c Ae 24.6.2

Hi, I'm trying to achieve this text effect (see attachment) - I'm guessing it would involve the use of alpha mattes and/or masks? But not too sure where to start, so I'd be grateful if someone could provide some direction. Thanks 

I'm fine with creating a parallax effect by setting layers to 3D and modifying the z-position etc... but what if all those layers are inside a pre-comp? I've set all the layers to 3D etc... and also set the precomp itself to 3D, but then when I move the camera, the precomp looks 'flattened' and the parallax effect is lost. There is quite a lot going on in the animation Im creating so it would be good to split certain bits into precomps... but does a parallax not work like this?

I was doing some compositing and wanted to scrub through a cached shot while the grid was enabled to see some alignments. I noticed that the whole application stutterd and only updated at about 5fps.  It improves if you zoom the viewer to fit, but zooming to 200% is terrible.   I think it's really concerning that a simple grid overlay causes such issues and I hope this can be adressed very soon.   Specs: Win11 R9 5950x / 128GB / RTX3090 566.14 studio driver 4K Sony Footage XAVC MXF 4K 25p comp cached Grid enabled Viewer zoom 200% AE 24.5 & AE 25.2.0b24 beta (slightly faster but still issue in beta)  

Hello, I'm using the latest version of After Effects 2025 (Windows 11, 64 bit). I'm using essential graphics to create a faux coin 3D spin controlled by a slider connected to the essential graphics. When I duplicate the layer (the coin comp) in the main composition and animate the essential property "slider" of the individual instances, they do not follow the values of the keyframes properly, the coins make random movements. I know it is a bug because when I create new layers or change the label color, the animations of the coins change randomly. If you watch the ReportError.gif you will find that random transformation when the coins should be still. In the Screen.png you will notice that all the properties have the same values but in the viewer, you see the wrong movement. This is not the first time this bug has happened to me, essential graphics seem to not work properly with a lot of instances. Any solution?

when i try and rotobrush any clip this shows up and I cannot get around it by matching fram rate, or unistalling my the software or anything

Hello. (excuse the machine translation)I have a 1280*1024 sized composition with a 3D layer called plane 1a and acamera layer (2 node camera, focal length 50mm).I have not messed with anything in the transform of plane 1. Only the camera is animated.Let us call this composition compA.There is a composition called compB, which has a 3D layer called plane 1b (same as 1a) of the same size, but without a camera layer. (For some reason, the camera layer is not available.)In this case, I want to write an expression in the transform of plane 1b that refers to the information of compA, so that the appearance of the planes of compA and compB will be the same, but I am at a loss as to how to do this. Does anyone know how to do this? (AE2020)

Hey everyone! Thanks for reading. I've loaded a template I downloaded and when I open it, I get the following message asking me to migrate the settings as the template was created on an older version of AE, which is fine, but I can't find the button! 😞  I found another thread similar to my issue, but the link marked as "correct answer" on the thread no longer works sadly, so I'm unable to follow it, but after reading the comments I have clicked everything in the timeline and opened every > under "effect controls" yet can see no "migrate settings" button on anyting; and can't see "particular" anywhere at all! (I can see "particle animation switch" and "particle random speed"). but again, no "migrate settings" button.)  For the record I do have Trapcode Particular installed. I got it last night to fix an issue with the video length, (it's a 10 second temlpate that was cutting to black at 5 seconds when the particles kicked in). I am fondly hoping that

Hello, sorry if this question has already been asked before, but I couldn’t find a topic that matched my issue.Here’s my situation: I animated using a 2D animation software (TVPaint) and exported many layers in 1920x1080, as well as still images imported from Photoshop. I then assembled everything in After Effects, adding lots of animation keys (with rotations on all three axes, precompositions, etc.).However, I now need to upscale everything to 4K. This means I have to re-import my TVPaint animation frames at twice their size, which alters all the animation keys in After Effects. Using CTRL+ALT+F to adapt to the new format doesn’t work because I sometimes intentionally scaled elements beyond the frame.Do you have any idea how I could scale my entire file to double its size, while also doubling all the animation keys across all layers?Thank you, I hope I’ve explained it clearly enough...

Hi community.  I have a line shape, which I have used a repeater, and one after the other just before the next shape starting from frame 0 , its opaque before becoming solid. I need for each shape to appear to be 100% solid with no transperancy. Just one full block appearing one after the other, like an EQ soundbar.     it takes 4 frames before becoming solid, seems like the transition is:0 % transparency25 % transparency75 % transparency 100 % solid.  Thank you.

Hello,I’m having a problem with Adobe After Effects. The application suddenly stops on the "Initializing Required Components" screen. Here’s what I’ve tried so far:Fully uninstalled and reinstalled the app.Installed two older versions of After Effects.Tried almost every solution I could find online.Unfortunately, none of these steps worked, and the issue persists. However, I noticed that when I created a new user account on my PC and logged in, After Effects worked fine.I would appreciate any help to resolve this issue on my main user account.Thank you!

Hi,I'm currently getting the same Crashes on a System that used to Run After Effects 2023 fine last year.Also updated to 2024 and reset everything but still didn't resolve the issue. The Software itself runs fine but whenever I either click Open, Import or Save and the Explorer window opens After Effects immediatly crashes. Shown crash report on screen is always:I also enabled crash report and looked through the report, the error alerts are: - Ticks = 25687 <5632> <ALOG> <5> EGG PromptUserThenDie lastmesg="<5632> <ALOG> <5> BEE Command Do Set BG Color -Ticks = 25687 <5632> <ALOG> <5> U U_Sev_PROBLEM After Effects error: Crash in progress. Last logged message was: <5632> <ALOG> <5> BEE Command Do Set BG Color Does anyone have an idea what could cause this? Other programs like Photoshop run fine when I open the explorer windows.  Thank you for any help and suggestion

Bonjour, Je rencontre un gros problème lorsque j'appuie sur espace pour lancer une prévisualisation, une dizaine de seconde doit s'écouler avant que la vidéo se lance, problème que je n'avais pas avant ( j'ai toujours utilisé des clips en 600fps, pourtant le problème est n'apparu que récemment ). Mes specs :Ryzen 7 5800xRTX 4070ti32gb de RAM dont 20gb alloué à Adobe

Hello,I recently updated AE to the 2025 version.I opened a file, made some edits, previewed the video a few times (clicked space bar), it worked great.Made some more changes, clicked the space bar again, the hand tool was being selected then deselected when I clicked and released space bar.And the video stopped previewing (even when I moved the "curser" thing manually along the video or when I clicked "play" in the preview window).I saved the file (it seemed to have saved well) and tried exiting the program, when I did AE stopped responding. I force quitted it and re-opened the file it my changes after the space bar stoped responding were not made. 

Bonjour,j'ai un problème à l'ouverture avec un fichier qui m'affiche ce message d'erreur :" des erreurs se sont produites lors de l'ouverture d'un projet1) After Effects (erreur) : Erreur lors de la tentative de duplication d'un objet texte. Calque de Texte ignoré."Ce qui est bizarre c'est qu'il y a un mois je n'avais plus ce message et je pouvais ouvrir sans souci ce fichier.Alors qu'en début d'année jusqu'à septembre je l'avais.Ce fichier a été crée sous AE .22 et je suis actuelle sous AE .24. Si je ne dis pas de bêtises (je n'ai plus la date exacte de la maj .24), le fichier c'est ouvert correctement sous 23.5.Merci d'avance pour vos lumières. 

i am trying to import glb files in after effects to use it as a 3d model but it is not accepted so when i tried to import the source file (blend+glb) i was given error 39::7 so i need to know how to import glb files in after effects

Hello,I have a strange "problem" when exporting my project that I created in After Effects.I am using the 2024 Creative Cloud. I want to have the file in webm format in the end. Small file size and transparent background.No matter what format that supports an alpha channel does not produce the desired result. - If I use QuickTime (ProRes 4444 + alpha) for the first export, there are different results depending on which codec I use. The result has a) no video (only visible through a conversion - I'll come to that in a moment), b) an interpolarity of the colors (+ background).- A direct export to Webm gives the same result as the conversion from QuickTime ( a) ) - it is not transparent and the graphics used are given white backgrounds for their own area.- An export to avi with active alpha channel has the same result as with QuickTime ( a) )  I used the following methods for the export:- Direct AfterEffects- Via Premiere- Via the Media Encoder Same result everywh

What is the best way to animate a design I have made in indesign? After Effects doesn't seem to let me import a indesign-file into after effects.

I'm trying to make a video with a lot of png photos, but I get an error like the picture.File names were set in order to 0001.png.I don't think there's a problem with my file, what's the reason? I also installed a new version of the program, but I keep getting errors. I have to hurry up and work on it, but I'm angry

Hi, yes this has been asked before. It's the kind of thing you only notice at 3am when you're doing the most boring predictable work in existence. Oh that fundamental, basic, most boring feature of being able to export your video in a standard high quality, low file size format?   No, you can't do that anymore. You need a separate program. You need a separate piece of software to export a movie from a program whose sole purpose is to create and export movies.   Please, for the love of god, let us export h264 again from After Effects. You clearly have no concept of how buggy and bloaty media encoder is, and how overkill it is just to export a h264 movie file. At LEAST support this file format - the most popular format in existence today.   It worries me that I am even writing this. Did someone accidentally format the repo?   [Title edited by Mod.]

Sometimes you want to rename your master comp, and that comp probably has your master controllers for linked expressions from other comps.  Sometimes, After Effects hits you with a bunch of errors when you rename the comp, and then you have to go and repair each expression (you can use the script find and replace in expressions to fix).  The faster solve is just to use AE Global Renamer to rename your master comp - it will work and keep your expressions intact.  I'm posting this as a little tip for posterity. 

I've looked at and read alot of info on how to copy and paste a paint stroke.  But I'm still having trouble knowing which switch to have on or off and most the info I studied doesn't give a lot of detail on how to go about it.Can anyone help please? 

Hello everyone, does the AE plugin SDK have an API that can get the value of the effect plugin parameter set before the project is closed when the project is reopened next time?

In my continuing quest to script a template, I've got a variable start frame from the client's lineup sheet. (This shot starts on 1001, this shot starts on 1097, etc.) So I've been trying various ways of setting the Comp's Start Frame via script. My template is set to 1000. ...but I'd like to change it to (in this example) 1016 or some other number.For the life of me, I can not find it in the set attributes block of Ae Comp (work area start, display start frame, display start time, work area start), or Ae Project Items (time). To paraphrase C-3PO on the Death Star, "Where could it be?"