Audition

Recording a conversation — my side locally into Audition (on Yeti mic), my partner's locally through Zoom.  I use my track of the Zoom recording only to find where to line up and sync with my local recording, and then use the local track for the actual mix.   Crazy part is — and this didn't use to happen — the track is lined up in one place and then becomes unaligned immediately, sometimes early, sometimes late.  It's exactly the same length but it's as if the pauses are stretched in certain places, or the conversation is stretched half a percent, or... I have no idea.  It's making me question the nature of time.  Image attached shows how the (local) track is synced to start, early at the cursor, late at the playhead.  What's going on???

And then there is an audio-loop if I don't putt the faders of the mixer down. But I need these faders open when I want to here the playback of the audio in Audition. I've lost so much time because I forget to put these faders down.Can I somewhere in Audiotion put the direct output out when I record in WAVE-mode, but when I'm in playmode (in WAVE-mode) automaticaly the output is on?

Hello, I plan to do a project so that my voice sounds like these excerpts, but I cannot understand the descriptions to follow. I have the voice for but I can't really understand the mixes. Can you help me to figure it out ? I have there two audios. Firsthttps://youtu.be/d4c5iRl9KbM?t=55 Secondhttps://youtu.be/d4c5iRl9KbM?t=350 Thank you for your time.

Hey there. Just finished recording and editing my audio book. The files need to be provided with the following specs. Any guidance on how to do this? Thanks! - Michael The total RMS of files should read between -25dB and -20dB with peak values not exceeding -1dB. The noise floor of the audio cannot exceed -60dB.

I need a download link to Adobe Audition that is compatible with Mac OS 10.12.6. Thanks.

Buenas,Estaba editando un proyecto en Audition y me dio error. Se cerró inesperadamente y perdí todo el trabajo que había hecho hoy. Pero eso no es lo peor. Lo peor es que tenía todos mis ajustes de aplicación guardados y ya preestablecidos, es decir, tenía mis efectos favoritos ya definidos, mi espacio de trabajo, TODO. Es muy importante para mi poder recuperar los ajustes de mi "perfil" de Audition, por decirlo de alguna manera. Una solución que encontré es que debía darle a Archivo/ Importar/ Ajustes de Aplicación... Me ilusioné a penas vi la dirección a la que me llevaba, pues había un archivo que decía "favorites.xml", pero al intentar importarlo me salió el siguiente error "No se ha podido importar el archivo Favorites.xml como ajustes de la aplicación debido a un error desconocido." Ya no sé qué hacer. ¡Es mi tesis la que está en juego! Espero alguien pueda ayudarme a reparar el programa, no sé cómo hacerlo, no sé si hay manera...

I used Adobe yesterday to record an audition with no issues. Today when I recorded, I noticed a great deal of noise inside the vocal file?I powered my system down and back up as sometimes this clears issues. Same noise again. I switched to another DAW (Twisted Wave). No noise there. Clear vocals. Therefore not my mic or interface. I uninstalled and reinstalled Audition. Problem with noise still exist?  I'm using Audition 2020. My Apple MacBook is not compatible with the latest update  but it worked great without the update before? Help! I chatted with support this am but found them to be less than helpful. For example, even after explaining that it worked fine with Twisted Wave they asked if I could try another Mic?? 

Hi,Recenly upgraded all our office suites to 2020 intel iMacs and have run into an odd problem: Audition't UI is blurry. I've attached a screenshot below. Retina display is currently set to the default, but the blurriness persists at other settings too. Most recent version of Audition. Has anyone else run into this issue?

SO I accedentally closed my project and I am searching to get it back. I have had Auto Save on and now I am trying to get the project back. However there is no path or something like that. I have had the Option "In Folder Session" but even dont know what this is. Can anybody help me to get my project back with "In Folder Session"? I urgely need it.

Hi  I have managed to X out the Mixer window in my workspace. Now I can't for the life of me figure out how i can get it back. I have a two screen set up, with timeline and media browser on one screen and mixer on the other. Please help!

I have a wav file which I accedentally have overwriten in adobe audition. Now I have closed the same project. Is there any way to save my file? 

Hi, Please help me. I need some more diffrent voice tones in text to speech in Audition.can we add any more new tones in text to speech. by default there are only 2. but i need some more is there any possibility.  Regards,Yogi 

When I select a small portion of audio (a minute or two)  for audition to detect silences. It works.When I select the whole audio file (an hour long) and tell it to detect silent parts. It's results are durastically different.What is going on?First image is it detecting silence well.The second image has highlighted audio that audition is thinking is silence when it clearly isn't

Out of the blue its saying you have a trail version and need to register it in 30 days. I've had this purchased software (with product code) since 2012. Adobe won't do anything since its not supported anymore. Any idea's and or suggestions to make this run again, thanks.. 

hi! I’m trying To add an intro clip and an outro to multiple audio files at once. Is this possible ?

I have installed Cool Edif 2000 on Windows 10 pro, It's OK, it's the trial version. It's the normal way.I click on "buy now" to enter my ID, but in this window "enter serial number" is grayed.What am I doing wrong?

Hi all, Whenever I try to cut a small fraction of audio in Spectral Frequency Display I find that many times a random artifact, appearing as a line and sounding like a pop, appears at the edge of wherever I cut audio. It only happens when I use Marquee Seleciton, so is there some reason for this? If so, how can I turn that off? Image attached. Thanks in advance!

I have a bunch of recordings that have separate files for the left channel and right channel.  What is the best way to combine them to make a stereo file?  Would I use the multitrack editor or is there an easier way? 

Hi all, So I'm editing an episode of a podcast and has to clean it up a bit in a multitrack session before mixing it down and putting the finishing touches on it in waveform frequency display. I started listening to the file and noticed there there are weird lines of negative space breaking up the audio files of the guests. They are all from Microsoft Teams, but besides that I'm not sure why this could be. The sound is not terribly off but I wonder if it was because I inserted it into a preset multitrack session template. Is there anyway to undo said lines? 

Drivers are up to date. Audio works fine and  I can see the video if I stop playing it, but if I resume, black again

I have a tremendous amount of static in this accompaniment file.  I have scoured the internet, and all anybody says to do is use the Declicker, but the declicker has absolutely no effect on this clicking/popping/static.  I don't even know what to call it.  Can anybody help me??

Panic situation. Somehow, my entire VO demo has been over written with a 1s loop of one of the voices. When looking at it, the Spectral frequency doesn't visually match the wave. The 1s loop is played even where the wave shows silence, between audio clips. Through my headphones I hear the audio from the Spectral Frequency, not from the wave. The wave appears to be intact, but the Spectral Frequency isn't showing a true picture of the wave. I've searched the net for info, but there isn't any on this problem. Any advice???? I don't want to have to do these characters all over again.I've attached a screen shot of the file as it appears in Adobe Audition. I hope you can help me find my work. Thanks. Richard StringerRichatzie2000@aol.com     

A client wants a phone system recoding done with these specs: ITU G. 711 mu‐law 8000 Hz. Please clarify what settings these would be for saving in Audition.  Is this PCM?   Thank you!

I just downloaded Audition on my M1 MacBook pro and am disappointed to say that the program does not work with Apple's built-in screenreader called VoiceOver. The menus work and are accessible, but the actual interface is not at all. In fact, I cannot even enter Audition's interface. I get stuck at the top above the window where my otpions are Close, Minimize, and Zoom, along with the title of the window, "Adobe Audition 2021". Does anyone know of a fix for this? Perhaps another screen reader? Unless I'm doing something wrong here, I'm concluding that Apple's Voiceover and Adobe Audition do not compliment each other. Really big bummer.

In my radio work, I record one large file with several audio breaks.  Then I copy each individual piece of audio and paste it to another file before uploading it to FTP.  The problem is, the audio sounds bright when I first voice the break and play it back, but once I paste it into another file, it sounds flat and slightly muffled.  Any ideas of why this might be happening? I'm using AE C6 recording with a Neumann T103 with a 286 DBX mic processor and using a Focusrite 2i2 interface and a windows desktop.