Audition

HalloI have a problem. I have recorded a favourite, that should insert a silent part of x seconds, and assigned it to a keyboard shortcut. I want the silence to be inserted at the current position of my play head, but it always goes to the place, where I at the recording of the favourite had inserted the silence when I run it. How can I achieve this.Thanks./Ulf

Please download the attached file to view this post

Hi there, I'm having a strange issue that hopefully y'all can help me with. When I start to record a broadcast, randomly the recording will echo/double/whatever. I've narrowed down that it typically happens when an input/output is changed. I've attached an example below. Can someone tell me why this is happening, and if there's a way to predict/prevent it? Thanks!

Hi,I can't seem to find a way to increase the frequencies shown on my spectral view. It appears to cut off around 15k, and I want to go up to 24ish. How can I do this?

i have a problem. i need to export selcted region in audition. i make many cuts out of one track and i want to export immediately. 

The recording stops when I want to set a marker range. I can set marker points while recording, but if I select the markers I want to merge and click on the Merge button the recording stops. Is it possible to allow merging markers while recording?

  I've attached the video about the problem. Brief: Ctrl + Mouse wheel zoom in Multi-track mode isn't properly working at some point.         Please watch the video to see the exact issue! 

I have a number of stings/jingles/stabs on one track in a sessiion that I'd like to use in subsequent sessions in a very similar way, maintaining the separate clips,  keyframes and sequence of clips. I can't see a way to export or copy them to another session. Am i missing something? Thanks.

 Sorry for repeating this I couldn't find the edit botton. Hi all, I'm working with Audition CC 2018 on windows 10. My mix is not coming back in stereo and this is a first. Every place I look says it is a stereo mix but it's not, HELP! I have been using Audition for over 10 years. I should add that when I go to the session and solo one track, say guitar, when I pan right it plays from both speakers, when I pan left it plays back in one speaker with hardly any volume.

Hi all, I'm working with Audition CC 2018 on windows 10. My mix is not coming back in stereo and this is a first. Every place I look says it is a stereo mix but it's not, HELP! I have been using Audition for over 10 years.

Hi there,  I am considering getting a controller to help edit with audition, I looking for something inexpensive so was considering getting the SubZero MiniControl MIDI Controller. Would this work with audition?  

Having watched many videos and read articles on compression, I'm not sure I still understand it. I'm working on an interview piece in Adobe Audition. It's aimed at home listening on a CD player but parts of it may also be for broadcast. Firstly, I normalised the audio to -1db. That didn't seem to bring it up as much as I thought it would. Secondly, I applied compression (see attached jpeg for settings). Added about 3db output gain to bring it up to -1db. It was peaking a lot in the red, so I reduced it to -3db. It sounds fine when I listen back on headphones (mp3 file attached). Maybe I'm approaching it in the wrong way. I switch on my stereo system, tune to talk radio and set the volume at a comfortable level. Then I switch over to the CD, not touching the volume. The CD sound is so much lower than the radio. Should I be striving to match the CD sound with the radio output at all? It's not a very scientific approach to sound production! However, maybe som

Hi all, first time posting here. I have encountered a small issue when using Auditions.I currently run and edit a small podcast, we use a Focusrite Scarlet 18i20 2nd Gen and currently use 4 professional quality mics (looking to go up to 6). I use the standard set-up of running each mic through auditions, recording onto seperate tracks.The issue I have encountered is that, when I came to edit the next episode (recorded weeks ago), there was no audio on Track 1 on the multitrack. The cursor was moving over clearly visible waveforms, and the metre input signal was moving as if there was playback.I checked the audio hardware and mapping, as well as on my device (running windows 10). Moving the audio down to Track 5 gave me perfect playback, and when I moved audio from Track 2 onto Track 1, there was no playback. So it looks like I have a playback error on Track 1. I had used part of this same recording Yesterday, and it played back fine on Track 1 then. Re-starting the software and de

I've reported this bug on the UserVoice forum but I'm just going to put it here as well in case anyone else is wasting time struggling with it! I'm using Audition 14.2.0.34 on Intel Mac When a stereo clip is on a stereo track the clip pan envelope sets the balance between the left and right channels. If the clip pan is set to L100 then you will only hear the clip's left channel. If that stereo clip is a 2 channel clip created from 2 channels of a multichannel audio file then the pan envelope will work correctly on playback but will be ignored on mixdown. To reproduce the bug:Create a new stereo multitrack sessionOpen a multichannel audio file, select two channels of that file and drag them onto a stereo track. (Depending on your settings Audition may try to put the two channels onto two different tracks, in which case hold down option as you drag)You should now have what looks like a stereo clip.Make sure "View>Show Clip Pan Envelopes" is selectedDrag the Pan Envelope

I am mixing the sound for a short film and accidentally sent a muted track from Premiere to Audition via dynamic link. I edited a bunch of other tracks and clips before realizing this track wasn't playing any sound in Audition, so I don't want to resend the entire project and lose all my work. Audition displays the waveforms and doesn't indicate that the track is muted, but it won't play any sound. Ideas?

Hi, I'm having a problem with the brush tool selection in Adobe Audition. I want to highlight a specific area to mute it a bit, but once I select the part I want to remove and press the space bar, it plays the whole track and not the selected area! I cannot hear the selected area and therefore cannot remove the specific noise! I've never had this problem, why has it started doing it now? How can it be fixed?

Hi!Audition 2021. How do I play overlapping clips in the multi-track editor at the same time? (not crossfade) This feature could be enabled in the previous version.(2018)

I have a subscription to Amazon Music HD. They allow downloads of music files in HD and ULTRA HD. HD is defined as 44.1khz 16 bit - CD quality in other words. Just out of interest, I though I'd have a go at recording the dowloaded files (encrypted and only playable through Amazon's app of course) into Audition and see how they compare to a mastered CD. I'm using "what U hear" under MME driver on my Soundblaster E5, which is supposed to record the computer's audio stream. I find that the signal level varies depending on how high I set the playback volume of the Amazon music app, so have been playing around with this. Through trial and error, it seems the only way not to register clipping in audition's level meter is to set the app volume at 60 (100 being full).The resulting waveform looks like this: Certainly doesn't look like a mastered CD! I'm surprised to see the odd peaks, although they are very short and don't result in any audible peaks when list

I have no idea where to turn to. As the title says, I bought Adobe Audition after my subscription went out, but all Adobe did was taking my money and I received no confirmation email or receipt. Where do I go to get in contact with support? I'm using the same email as before, no new account... Everything is the same but somehow I still didn't get my subscription. I don't want to pay for it again since a one-year subscription is a lot of money. Help?

  As the Subject says please help, in case this is useful I'm running on a legal version of the software, not a crack, I've opened it not too long ago so I don't know what I'm doing that much as I've only watched a 20 minute tutorial. It's on the latest version and updates. Please help. 

Hi All.  I'm trying to edit something and I was going to use my plugin until I noticed this. The menus inside the VST and VST3 options don't show up. Look at the picture for reference.I've clicked on them, just hovered over them, everything. They just don't open.Please help.

dozens of clicks later no User Guide. a bunch of stuff i am not interested in. is it so hard to ahve a user guide on the user guide page Adobe, are you so post-care that it no longer works to have manuals and tables of contents?!

I was editing a podcast and noticed I didn't have the option to save. (but I believe after reading this software automatically saves your work) I turned my computer back on to find the skelton of the project there (all the edits/cuts) but no actual audio. I have not be able to link re link the files as they are nowhereto be found. It crossed my mind, I may have accidentally deleted them, so I installed recovery software but was not able to pull up anything! I have read online that this happens but the tips and file paths suggested have not led me to my missing files. I tested the file path by creating a new project, recording my voice and was able to find those files and re link them. Any idea on other ways to find missing audio files?

where and how does cool edit pro save my equalizer and parametric equalizer settings which i created and saved incase i installed cool edit pro in another pc and wanted to transfer my presets?