Audition

Hello, Just curious if Adobe has a list of best interfaces to use with Audition. I'm considering getting a MOTU 8pre but I want to make sure I'm not going to have driver issues. Thanks,Will

I've been trying to speed up my workflow by listening to Multitrack audio (a single track) at higher speeds, using Time Stretch. I've been scrubbing through a single track in Multitrack viewer, crossfading silence and chopping unwanted bits of the audio out. I've been doing this while listening at about 1.5x speed through Audition's time stretch feature. When I revert back to a Stretch of 100% (Normal) in Properties, all of my edits seem to not scale with the audio's changes. There's a lot of audio overlap, as if the edits have stayed in place from where I did them at 1.5x speed. Is there any fix for this anyone knows of?

Hello, I was working on a project that took me several dozen hours. When suddenly Adobe Audition CS6 crashed. I thought it wouldn't be a big deal but when I re-opened the project it said "The file is either corrupt or using an unsupported format"I am not allowed to "Link a media" (the box is grey).I tried to restart Adobe Audition while maintaining "Shift" and as administrator. Nothing worked.All the "Bounced Files", ... are still there in "Adobe/Audition/5.0/THENAMEOFTHEFILE". All the other .sesx files can be opened but not this one and I really want it to work. I don't know what to do...

Everytime i silence a part of my wave, the scanning for pitch display automaticly starts and i takes like between 40 to 60 seconds. Is there a way to stop this? it is a really long process everytime i need to silence a bit of the file. Thank you for the help. 

When i select a frequency of a background noise with the marquee selection tool and hit delete it mutes my whole song for some reason? is there a way to fix this?

Hello,I would like to have a dry audio track playing in the front left (L) speaker, and in the surround right speaker (Rs), I would like the echo effect of the left speaker. How can I do this? Thanks!

I imported a mono vocal file (recorded in audacity) into Audition. It was fine. I could hear it in both ears. I imported a stereo music file into Audition onto a second track, and I can only hear that music play in one ear. (left) I cannot figure out how to rectify this. Although I hear the voice just fine in both ears, the music "feels" disturbing since it's only coming through the left ear. I'm using a Focusrite usb audio interface; that's what I have my headphones plugged into. I originally recorded the voice in audacity because Audition was crashing every time I tried to record.. and I don't have time to technically sort that out.. so I'm only using Audition right now to edit the podcast (just adding music). I just need to know how to keep the stereo music audio file from only coming through one ear. Thank you in advance, and I apologize for my technical retardation. I'm no sound engineer 🙂 

Actually I have a feeling that AU didn't changed much since cool edit.New icon! Are you kiddin' me? 

How do i record from internet live conference call to audition and also able heat from my output speakers connected external sound card Focusrite Gen 3 Solo.What option do i choose on audio hardware in put setting... please help

How can I import a session from a different Creative Cloud? They sent me the session file via Google Drive, but when I try to import it, I get this message:  

In the tutorial about noise reduction, one step is out of order or missing.  “Capture Noise Print” step is missing. You need to press the Capture Noise Print button .  That needs to happen after “Find a Noise Print” and “Open Noise Reduction” steps The steps as current outline will give you an error.

During playback, sometimes there are *blip* sounds that happen generally in the same area but are not actually present in the individual clips. However, when I remove the vocals where the blip is happening, the blip is gone. But just say that this is a playback issue, but no, when I export as an mp3, it also has blips. Not only does it have blips, but the whole song sounds extremely wacky because the tuning of automatic pitch correction and waves tune is completely off. They sound good in playback, but terrible and extremely OFF after exporting. I've tried exporting to premiere pro, but not only does the quality go down, but there are still blips as well. I have no clue how to fix any of these issues. Adobe audition didn't have any technical issues during the first couple of months I was using it but this has been an ongoing issue for months on end now and I'm starting to really hate it. I found somebody who had a similar issue in this community but they never got an answer. I could've

In media browser, is there some way of playing the clip with a keyboard shortcut?Spacebar doesn't seem to do it.Thanks in advance.

I was wondering if I could get the decibel markers you see on the right side of the wav form editor in the multitrack session editor. I circled the decibel level marks you see in the wave form editor in this pic: As you can see it is missing in the multitrack session editor below:  I find it more difficult to figure out how much volume levels I should change working in the multitrack session editor compared to the wave form editor.

Just wondering if anyone can advise me on how to remove the interviewer's intrusive 'umm' and 'yes' which cut right over the interviewee speaking. I just can't see what I need to erase in the spectral waveform. It seems that the frequency and volume of her voice is too close a match to the interviewee's. Or am I wrong? Any advice greatly appreciated. 

thank you for allowing me to be part of the community 

I'm using adobe audition 13.0.13.46 everything was working fine until today, when playing audio on multitrack view Audition freezes for 2 or 3 seconds and displays "calculating playback..." in the botton left corner of the screen everytime I play audio (spacebar & with display button), haven't change anything, no hardware, no software, it only does't in multitrack view, edit view works fine (fast) other programs work fine, pro tools, fl studio, sound forge, I rebooted the computer twice, rebooted the audio interface, I have previous versions of AA I tried them and they have the same problem in multitrack only.Need helpThx

I'm hoping to use Multitrack but I'm unsure if it can do what I need. What I want to do is load approximately 12 songs into Multitrack and listen to the songs momentarily to try and get the volume levels similar to one another, is this possible in Multitrack? I don't want to use the 'normalize' function as I heard this can mess about with the dynamics of a song. After discovering which songs need to be louder or reduced I would then go to Amplify to sort that out, does that make sense? Any help would be much appreciated.

I am banging my head trying to remove a big band sound from under speech using the spectral waveform editor. I can't clear the bang without removing the base frequencies in the voice. Please can anyone help? Even just confirming that it can't be done would be helpful at this point so I can move on! Thanks in advance. 

When I ripple delete all tracks using either CTRL SHIFT BACKSPACE or CTRL SHIFT DELETE, my playhead takes me back to the beginning of my multitrack session and begins playback rather than remaining where I made the edit. Happening about 80-90% of the time, and this has never been an issue before. Windows 10 - Audition v 13.0.13

But it's showing TWO spectral displays. Where did my other track go??? Here's a picture of my screen. There are no clues in the history list.And I've beem exploring  the various settings and windows. I can't figure out what happened. As you can see, the little thingy up above shows two tracks, but the waveform window only shows one track.

Using Audition on PC (Windows 10, fully updated) with generally high-performance components.  Playback audio is ASIO with SteamSeries Arctis 7 headphones (or speaker plugged into the controller). The playback in Audition has strong noise that is associated  with the peaks both in timing and loudness (I think). Peaks are not too high. There is no noise during silences. The export is, however, perfectly fine.  This is, shall we say, disconcerting during the edit process.  I don't have the same problem with Premiere Pro, which plays back accurately on the Arctis 7 earphones (as does every other app I've used them on).   I've attaced a short video of the playback in Audition, and the audio export of the same area on the clip.  Any ideas?  Cheers! Ed 

warnings or errors were encountered when opening the following files? Please help ?

Hello,  The session export to duplicate file and a session is not working or perhaps the feature has changed?   

Hi there. I'm having an issue, using Punch and Roll . When I playback the audio after using this feature there is an audible click at each point where P&R has been used. Any thoughts on how I can avoid this? Thanks so much!