Audition

I all.  As stated above, I upgraded and lost the above.  Any ideas, please? Thank you, Paul.

I used Audition 3.01 for 10 years to process digital recordings of a concert band directly from CD compiler built in.  Now, using Audition 5 CS, I get the CD compiled, but it won't burn CD's.  What else do I need to do? 

I've been working on a multitrack session for a few days without any issues. This morning, I tried to open the file and received an error message that read, "This file is not supported by libsndfile. Code 21. File contains data in an unknown format." I have no idea why this started happening now. Can someone give me any advice for how to fix it?   

Dear all,I have a life recording from a band The Gathering that has been recorded on a MD portable with a microfoon. The sound is acceptable but the high frequenties sounds like a flanging effect.(like you are playing two indentical vinyl records at the same time)I would like to improve the sound quality  by removing this strange effect.Does anyone know how to proceed?Regards Robin

I just upgraded to the paid membership for Adobe Audition.  Until now, I've been using the very first version of Audition that was installed on my computer.  Needless to say, a lot of things have changed!  The old Audition was a lot easier to use.  Anyway, I have a question about editing.  I am used to highlighting a section of audio, and then when I hit the space bar to make it play, it only play that selection - and anytime I press the spacebar, only that section plays.  That's what I want.  With the new Audition, the same thing happens the first time I hit the space bar.  But the second time, the play head just keeps going past my selection.  It is sooo frustrating.  How do I make it so that when I select a portion of audio, only that portion plays?  Thanks for any input!

I record speeches quite regularly on a wireless microphone that allows me record at 0 dB and -12 dB simultaneously from the same lav mic. If the audio peaks on the 0 dB track, I may fade-switch to the -12 dB track to avoid distorted audio.I have been syncing the 2 tracks and manually compensating the audio levels through dB keyframes between the 2 tracks whenever it is needed as shown in the attachment. I fade down the dB of the peaking track and fade up the dB of the -12 track under multitrack.I’d like to keep doing the duo-record and primarily use the 0 dB track with intermittent -12 dB track fixes. I’ve already tried lowering the recording gain level so I never run into peaking issues; however, then I find normalizing the audio necessary and it brings up unwanted noise. Yes, I’m sure I could use NR, normalizing, compression, & EQ effects better, but may this conversation please stick to mixing the two tracks faster & better?Efficiency & a cleaner way to mix between the 2

Ive got a lot of clips on the one track after syncing some vocals. When I try to merge two clips, the shape of the waveforms changes in one channel or drops a channel altogether. I dont understand why. There are no clip effects on one separately. I would like to be able to know why some clips can merge successfully (on the same track) and others cannot.  I appreciate help, thank you. 

I have been using Audition 3.0 for over 10 years with little to no issues, the last 3 years on Windows 10.  Now today out of the blue, I am getting the R6025 error.  Same issues as everyone else, but I do not see any guidance for Windows 10.  I would just say screw it and use the cloud version, but it is a giant pain in the ass because I am not fast on it with all the changes they made.  Can anyone offer suggestions on how to fix?  I don't even think I am able to downloard it anymore. 

Hello, My gear:Sony A7III, Rode Link, Rode Shotgun Mic Pro, Beachtech Adapter, Macbook Pro with latest OSI am a video beginner. I did my first video project and I was pretty happy with the result but some of the audio clips sound too small and also has white noise. So I removed the white noise by noise reduction in Audition, made it sound closer by EQ level, and volumed up a bit. I think the voice itself sounds pretty good now but the audio file has this high tone noise, which kind of sounds like glass pieces hitting each other throughout the clip and also noise sounds kind of like a cricket in between the person talking, where it is supposed to be silent. I think this is because the white noise is removed and that high tone noise became more clear. Somehow regular noise reduction doesn't remove the high tone noise. It reduces it a bit but doesn't remove it. Even if I select the specific cricket-like sound area and take the Noise Print and apply the noise reduction, the crick

Is it possible to ask Adobe for a download of earlier copies of Audition for Windows 7... version 2017 and 2018 worked Ok, I have two computers the older runs Windows 7 It's turned on every three weeks for a couple of days. Roger Mallison

This is a new behavior I can't account for and can't seem to fix. I have long used AA CS6 with a Firewire-connected Focusrite Pro40 preamp/audio interface. All my input and output flows through it. Now, all of a sudden, the Audio Hardware dialog doesn't see it; all I have for choices are Built-in Microphone and Built-in Output. I am on a Mac, High Sierra OS 10.13.6. Now here's the kicker, If I look at the Mac's "About" hardware list, I DO see my Focusrite unit connected via Firewire. So the Mac sees it but AA doesn't. Huh? I can't quite see how this happened without warning, unless there was some kind of background update that did it. But I know I have a connected Firewire audio device. Why doesn't Audition know? I'm dead in the water.

Please help!!!!!!!I'm working on a project and used noise reduction. I accidentally captured voices when using it and now have the "tinny" sound. I haven't saved my project and have been trying to fix this. Is there a way to undo noise reduction? 

I'm sure this is an easy fix, but I'm trying to cut one track using the razor tool and its cutting all of the tracks. How do I select just one?

In this video this guy has same voice throughout the speechHow has he done it .Did he do it in one take.If he has made this audio recording in multiple takes just how did he do it? https://www.youtube.com/watch?v=uvosNz0Xq7g And this is my audio recoding for my youtube video.I have done multiple takes and every take sounds different.https://we.tl/t-Z164wT5SiXPls tell how to make same voice for full recording that sounds good naturally.

I use Audition 2020 13.0.9.41 version on mac, and I can't save the project as audition session file. I can only save it as audio files. How can I do with it? What went wrong? Thanks a lot!  

Running Audition on Mac Mojave v10.14.6 and it now wont even open - just crashes. unistalled and reinstalled - no difference. Have it on a pc laptop and that also doesnt work so have gone back to Audition 2019 on the pc laptop which works perfectly but cant find that version for my mac - help!

2x now I have been in the middle of working on a multitrack (on a Mac) and Audtion just disappears and quits. In a flash and is not saving the last (at least) hour of work. It's maddening! Is this happening to anyone else? 

Despite inputting the preferred export setting (which is 192 CBR for MP3) - Audition exports the MP3 file in 320 kbps.Short video showing the error:https://youtu.be/ndW-dRlzDN0Can anyone confirm if this behavior is consistent on your end? I've used both Audition v13.0.9 and v12.1.5 - they exhibit the same behavior.Thanks,Bryan D.

Hello. I have a multitrack of various stereo tracks. The pan envelopes for individual clips work perfectly (i.e. if I pan 100 to either side, the other side is silent). However, the pan envelopes for tracks don't do anything whatsoever if the track goes to a send. Only tracks which go direct to master work with the track pan envelope. Any idea why? The clips on the tracks in question are mainly mono (on stereo tracks) but I'd have thought this would be a good thing?

Hey!I have tried to set the audition audio preferences to include my synth so i can play directly into the audition app, however, while the synth is recognised on my computer, its not coming up as an input option on adobe audition, is the novation Mininova just not compatiable with adobe audition? 

Audition CC2020, I record direct from my interface into audition often (podcasting, videos, etc.). Using multitrack session so I can monitor in real time, I can only see the tiny little levels bars from the track display. I'd like to be able to see a better display of my current levels, is this possible? I'm guessing there's a button somewhere I'm not seeing that shows bigger levels monitoring. Thanks in advance. 

Hello, I am a podcaster and I just bought a new laptop. I did installed Audition onto it. I do have some audio templates on the old laptop that I don't want to change. How do I transfer those to the new laptop?

The other day, AU3 crashed my computer while I was editing and I had to do a System Restore. Now, it's working fine again except it will only play when I am in the AU screen. As soon as I alt-tab to another screen, it stops playing. It has never done this before, and I've been using it since 2009. Is there a setting somewhere that prevents it from doing this?   For my job, I have to be recording my voice in AU while tabbed to a window in my browser with copy to read. If it's going to stop every time I tab away, I'm in a dilemma regarding my employment.   Help!

New to Audition, Logic Pro X user. In Logic, when I ripple delete everything to the right of my cut point moves to the left and I can immediately apply a cross fade to the selected tracks by simply dragging out a fade from the fade region (top corner) of the now adjacent clips. It seems that in Audition after a ripple delete I have to "Select Clips to the End of Session," which I've assigned to a keyboard shortcut, and manually drag them just a bit back to the left so there is an overlap before I can apply a cross fade. Is that correct? If that's the way Audition works that might be a deal breaker for me. I make hundreds of cuts in every edit and although it only takes a second to select everything and drag it back to allow a crossfade it's an extra step that will add time to the edit. Thanks for any tips you can pass along.

Hi everyone, I am very new to Adobe Audition. I have some tracks in the multitrack editor. I have done some work with syncing and now trying to 'clean up' individual tracks using effects rack. When I move from track to track, my settings that I have just done (eg EQ) are defaulting back to default settings (as if I didnt do them). I cant move between tracks.... Sorry for newbie question.