Audition

Has anyone had success utilizing the ZoomAudioDevice with Audition?  I tried a test to see if I could record a Zoom call straight into a multi-track session in Audition using the ZoomAudioDevice.  It shows up as an input and an output in the Audio Hardware list as well as mapping, but when I go an arm to record there are no levels bouncing and get no waveform of the person talking.  I feel like there's some button somewhere that needs to be clicked, but haven't found it yet.  

Hi. It's been posted here a few times, and I wish I could recall who gave up the solution.But, it seems that anything newer than version 12 of Adobe Audition will progessively slow down as you make ripple deletes along a timeline. It starts out almost normal and then, with each ripple delete, the wheels spin for a longer and longer time as the interface hangs. My last edit took 20 seconds. This is repeatable on both MAC and PC.And, frankly, this kind of lag time associated with a commonly used tool makes this product practically unusable. This a a severe bug which despearately needs attention. 

Just as the title says, I cannot open these effects at all. I can apply the effects rack fine, but the top menu dropdown is essential for me and it is not working, especially Noise Reduction Process. I cannot even get to that effect and I use it all the time. I am working on 14.0 on a laptop with a single screen and rebooting has not worked. Wondering if there is another solution before I go ahead and uninstall/reinstall stuff.

Dear community, I am new to Audition and trying to get familiar with it. Unfortunately, I could not find any solution to my problem.Multitrack Session: If I record my voice in the Multitrack Session part and listen to it in the Multitrack Session view, there is a constant high random background noise to hear (especially when my voice is pausing). If I double click on the recorded track to work on it, the noise is almost gone. If I play the same file in the Audio Section the track is also almost clean. The spectral frequency doesn't show any strange noise to work on.Where does this noise come from? Is there something I need to click to get rid of it to be able to listen to it also in the Multitrack Session? Anything I missed? I would like to master several tracks in the Multitrack Session and this noise is driving me crazy. Attached is a voice file played in the Multitrack Session and afterwards played after double clicking on it. Is there an automatic noice reduction active i

I want to remove audio from a video file/vlog in order to use it as a podcast. However, as the video file is also my original vlog broadcast, I don't want any changes that I make to affect the vlog audio. how can I do this in audition?

I am not able to open Adobe Audition and I always get this error message.       

I've been using Adobe Audition for years, and before that, Cool Edit Pro, so I'm pretty experienced with it.  But the panels are, for lack of a better word, free-floating. They have the white bar at the top of each panel, and nothing I do seems to solidify them (again, for lack of a better word.  When I go to the panel settings, "Undock Panel" is greyed-out... and I don't know if that's the problem anyway.  I've attached a screenshot which I hope may clarify the situation.  I have this display customized for my audio book narration processing.  If anyone knows what's going on here, please let me know. Thanks! Steve Biddle [Mod note - personal email details removed]

At the start of mixdown I get an error code C000000005.Never seen that before and have no idea how to fix it.

Trying to record a voice over in multitrack.  Using a condenser mic through Motu Audtio Express.  For 2 weeks AA has crashed constantly. Crashes when I hit record, hit spacebar to stop, selct output for my headphones.  You name it.  Have re-installed multiple times.  Ran update today.  Was on phone with Adobe support a week ago.  They remote into my machine and said it was the audio interface.  I was using an adapter to plug into the USB type C.  I thought that might be the issue. Got a type b to type c USB 2 cable to run direct.  Issue persists.   I have isolated the problem to Adobe Audition.  Using the same settings and hardware I have successfully rcpordeed to Reaper, Audacity, and Garage Band multiple times without crashing.  The only software that won't work is Audition.  Audition does work using the built in speakers and mic, but that does me no good.  Why are other softwares not having ths

i have re started my i mac and  adobe audition more then twice  and i cant seem to get it to save my songs with vocals. i only get the beat with no vocals attached.   i saved songs before and it was fine but now im having this issues.  can anyone help. 

Still having trouble mixing down to file.. Attached is what is happening, nothing seems to be highlighted. I am also using a laptop. The "entire session" is not highlighted for me to mixdown on the second picture. I have already saved the session. How can I correct this? I'm also using the updated version of Adobe.

Hi there,I've searched through the forums, and seen that others have this problem. I've had it since I began using audition and kept assuming some new version of audition had fixed it, but now that I've upgraded to2019 came out with the same issue still I thought I'd at least make a post and register how unhappy this makes me. I have my autosave set to save every 4 minutes, and save 100 sesx files before it starts deleting them. And I'd say it works about half the time, essentially randomly, as far as I can tell. Sometimes I will be doing work for 3-4 hours and it will consistently save sesx backups every 4 minutes. Sometimes it will stop after one hour, save nothing for a long stretch, which I don't notice until it's crashed and I have to go with the last time I hit ctrl-s (which I do as frequently as I can remember to), sometimes though I might lose 30-40 minutes of work if I was in a zone and not remembering to save.Sometimes i look back at the sesx backup folder after doing a few s

Hi,I have opened a session, setup with sample rate 48kHz, imported a wave file sampled at 48kHz, set the Interpret Sample Rate to 48kHz, and loaded a VST, but still Audition keeps calling my VST plugin with 44.1kHz sample rate.How do I change that?Thx Jacob

Hi, I've seen some similar posts about jumping or a slow moving playhead, and this just started happening to me, but I'm not using any video, just simple voiceover recording and play back. The sound is playing back fine, but the playhead can't keep up with the audio and is dragging behind. Really hard to edit this way. Any suggestions? I have no other apps open whilst using the software. I have checked updates on both the app and my Macbook Pro and all up to date. I have tried increasing the buffer rate but no difference. Was all working fine before. Thanks!

There is a way to play the track and keep editing where you are, without Audition change your view?Let me explain: I am doing a thing while i am listening the track, (Zoomed In) when the cursor goes over the screen, automatically change what i am viewing with the next thing outside the screen, but this is annoying and doesn't happen in other audio software.thanks.

I'm very new to both Audition and audio recording/editing in general. I have a feeling the buzz I am hearing was from a power source too close to the mics when recording, but in editing I am only hearing the sound while in the Multi-track editor. When I listen to the individual files in the waveform editor, the buzz can't be heard. Any tips? Thanks!

I'm recording in Auditon and on my computer, it sounds great, even after I export it as an MP3 file. But when I listen to the file on my phone, the audio quality drops drastically. It sort of sounds like the audio is constantly peaking, even though I know it's not. I wish I could say it's just my phone being old (it's an iPhone 7), but when I listen to music, youtube, etc. through my phone's speaker, it sounds just fine--it's only my recorded audio files that sound low quality. I have tried listening to my finished edited audio, and completely raw audio, and both have the same sound quality issue on my phone. I'm working with a ShureSM7B microhone if that makes any difference. If you have any idea why this is happening or any advice on how to fix it, I would be eternally grateful. Thank you so much!

Hello! I just updated my Audition and I am trying removing some air conditioner noise (basically ambient noise) from a recording. Usually I use the de-noise effect and it removes or at least dampens the noise to an acceptable level. This time, no matter what processing focus I choose or what amount of noise reduction I set it to, it absolutely does not change the recording's sound AT ALL. I have also tried using FFT filter, going into the spectral view & removing select frequencies...none of these produce audio that sounds good or will work. Prior to updating, I have never had this problem before. I tried running the de-noise function in Audition 2021 installed on another computer & it worked perfectly the way I expected--it removed the air conditioning noise completely. I tried deleting and re-installing Audition and it still did not work. Help!

I'm running Audition v13 on Windows 10.  I've been experiencing popping and crackling on playback since I installed Audition. I read this post on the forums (https://community.adobe.com/t5/audition/popping-and-crackling-sounds-during-playback/td-p/9906750) that attributed the problem to MME, so I changed the setting to ASIO; the audio still crackles and pops. I've attempted to use other audio files to the same effect. The issue doesn't seem to be consistent: whether or not the audio pops varies per playthrough.  The crackling/popping is not present when I export the project (in whole or in part) as a .wav file. (I'm very new to Audition, not sure how most things work)

hey there, newbie here.I'm using audition to loop the audio file to the desired length which is easier compared to other software. so, all i do is, add a audio file and create a multitrack and start remix.But the problem im facing here is, some of the audio files shows error "analysis error" to be exact.So, what are the possible reasons that some of my audio files are having error while remixing.thanks 

New to Audition, first time poster, beginner's blues. I'm in receipt of .aif files of live concerts. The person sharing them with me would like me to "index" and return them without separating the tracks. From what I gather, "indexing" in Audition is essentially adding Cue Markers with a start and end time and naming the tracks. From there, I would assume I should just be able to export the file (including the Markers and track names) and share the file with the person (who uses Amadeus Pro). However, this has not worked as of yet. My question here is: how would you do this? I've tried separating the tracks, which seems like the next obvious thing to do, but while the tracks play for both of us in (Apple's) Music and other apps, it does not play for the person in Amadeus Pro, leading me to think there is some kind of default setting that I need to locate (similar to the auto dB reduction in the Multitrack) that is impacting my exports. Are there any hidden settings

I've been recording audio using a focusrite (scarlet solo 3rd gen) and up until today I have had no problems. However now whenever I'm trying to record something I am getting no sound at all even though the microphone input on my focusrite seems to be fine. Any ideas what the issue could be?

Nothing big, just thought I’d pass on that “included” was misspelled, in case someone would like to fix it.  I tried getting a generic email but couldn't find one.

Dear Adobe-Community,I would like to work directly with the .sesx projectfile in a texteditor but can not figure out how the dB values are converted to values from 0-1.  1 = +15 dB0.65 = 0 dB0.4 = -9.40.2 = -22.90.1 = -36.9.... Does anybody know the exact formula AU is using for the conversion? Thanks for your help!   

How do I activate Audition 3 in 2019?