Audition

Fairly new to Audition altho I have done a lot in SONAR (Which i no longer have). I'm trying to stretch the length (tempo) of a file but not the pitch. Heres what's blowing my mind. Youtube tutorials, it looks pretty simple, create multi-track session (easy enough), import song into track (easy enough) and then look on the right hand corner for a little sqaure that says VOLUME Mine doesnt. It says PAN and I cannot figure out how to set this little right hand square to VOLUME. And then I can supposedly drag the file out to the right which will increase the length and slow it down. Is there an easier way? Even if there is, can someone show me how to change the PAN upper right to VOLUME? Any help would be appreciated.

Hi everyone, I really like the Denoise effect to get rid of the background hiss/hum that's in my recording. But for some reason, after Denoise, it seems I just can't recover a natural/full quality the auido afterwards. Here's the link to the original recording in wav, and the mp3 output after it has been processed. The only effects on this are Denoise (Processing Focus: flat), Parametric Equalizer (Vocal Enhancer), and Multiband Compressor (Pop Master). I didn't add any normalization or hard limiter at this point.  Can anyone see if there's anything particularly wrong/displeasing with the final audio output? To me, it just sounds robotic and not very natural, especially more obvious on a mobile device. Or are there any suggestions on alternative effects to apply or maybe in a different order to get a better quality output?  I did try adding more mid-range and clarity, but it didn't really help.. Thanks.

I've been using Audition for over a decade.  Just upgraded from Windows7 to Windows10, and now I'm having all sorts of trouble getting audition to work properly.  I have a Lynx e22 sound card.  It shows a signal when playing sound in Audition while in MME, but I get no signal or sound when in ASIO (device class in Audition). Sound will however play from other media programs like Windows Media Player.  Recording in ASIO is a must for the lower latency.  I know this has something to do with Windows10 because I did not have this problem with Windows7.  Does anyone know what's going on and how to fix this issue?  

I am trying to move from ProTools to Audition for certain post projects.  All of my VST/VST3 plugins are showing up in Audition when I try to add them to a track.  However, some specific plugins show in the list but don't load when I select them.  Specifically, NX Virtual Mix Room, Dourrough Meters and  any of the Waves Abbey Road plugins.  Is that an issue with these specific plugins, or is there something I need to set in my Audition settings that is preventing them from loading?  All other Waves plugins load properly.  The thing that is baffling is that they are showing up as installed but when I select them they don't load.  Any suggestions?Thanks!

We've waiting for adobe audition for ios user for along time my question is when will see it ?Thank You!

Trying to even out chapters in an audiobook.  I have one "gold standard" chapter the producer considers perfect, against which I am comparing all the others.  I am trying to understand the differences which make one chapter better than the other, and also looking for a way to apply the settings for my gold standard to all the others.  I have tried "Match Total RMS to File," not successful.  Now I just ran "amplitude statistics" on the gold file, and they are DIFFERENT from the analysis results in Match Loudness. (e.g. total RMS is 16.60 in Amplitude Statistics, and 19.62 in Match Loudness).Why are these different?   What can be done?Thanks.Rob

How to restore this "exploded audio" ?This audio from old VCD Film. Audio Examplehttps://www.youtube.com/watch?v=P-dNFqaVJo0

Sending media into Audition from Premiere Pro 2020 (right clicking on a clip in the sequence and hitting Edit In Adobe Audition) throws two identical error messages:  Only started happening once updated to version 13.0.2.35. Windows 10, fully up to date as of 1/15/2020 Please sound off in the comments if you're having the same issue

What is the difference between "mixdown" and "mixing"?

I have ran AA3.0 for years and years on the same computer. I bought 3.0 when it came out. Ive read thru some of this forum... am I to understand because my PC finally crashed after years of hard work that I have to start purchasing adobe audition again? i paid outright back in the stone age. still have the serial number and still have the disk. Why am i being punished when audition worked just fine on my old computer? please help me understand this. im a little frustrated

hey so i am trying to preview my audio in audition and for some reason it is not playing the preview. it shows that it is playing but i am not getting any audio from it. 

A few years back dominicp50156988 posted a question similar to my own, however they had a Peavey 10 Mixer and I have an Alan & Heath ZED 10FX.Trouble that I'm having is that Adobe recognizes my mixer as USB AUDIO CODEC, fine but I cannot select more than two channels (both of which produce the same sounds) even though there are four mono channels and two stereo channels. I have not found anything in the manual  nor online stating that only two channels can be recorded like it was for dominicp50156988 and their Peavey 10.If anyone knows if this is the case or if I have not pushed a wee button somewhere I truly appreciate your help.

HelloI plan to distribute this audio recording a rending of Francis Brabazon's poem via YouTube.The audio recordings are over four hours.This link is a sample of the audio.Before I commit to creating this project using a photo slide show to complement the audio I was wondering if it is possible to improve the vocal.The fellow's voice in the recording if fine. However I was thinking it may be possible to give his voice a modest change possibly to slightly enchance the sound of his reading.Let me know if there is a useful method to improve the voice.Thanks!Using Audition CS6https://youtu.be/kkiu5Gil8dQ

Hey everyoneIs it possible to use the Kompressor-Effect based on a Bus from another track? (Windwos 10 Build 12.1.5.3)Thx for any help. Cheers 

I did a podcast interview via Skype. The audio unfortunately went in and out at times during the interview. Though it is very clear when you do hear the audio. I've transferred the audio to Audition where the problem remains. Is there any way to save this audio? I'm new to the podcasting and using Audition so any adivce helps!

Why would I be unable to record audio above -9?  It's applying a limiter to the audio as I'm recording and leveling out and distorting everything louder than -9.  I'm recording mono voiceover files.  Tried 24bit, 48k and 16bit, 44.1k.  

Hi ,In multitrack sesx/sessions, when working on really short sound samples or sound effects, it can be tricky to jump between different things happenning.Is it possible to shorten the duration of the session/sesx file?I am used to clicking on the time scale, just above the playhead to quickly zoom the viewer forwards and backwards in time. Maybe I am missing something and there is a better way of working? (Meaning my need for duration adjustment is a symptom of my wrongdoing?)

I use mix paste frequently with the Spectral Waveform view. I always open it with CTRL+Shift+V. Occasionally I'll want to cancel out, which I use the Escape key to do. Frequently, the Mix Paste window will close, but another one will immediately trigger and open. This happens frequently, and I've only ever had to click cancel twice; never more than two. It's been happening since versions of 2019 and persists into todays release: 13.0.2.35Windows 10, fully up to date as of 1/15/2020.

I have 8+ tracks for my film, 4 dialogue, 3 sfx, 2 atmos and 2 music tracks. Is there a way to apply the essential sounds tag to each seperate layer rather than each clip / file?  When I do select all on the layer / track, and apply it seems to only apply it certain tracks.Thanks

Using a mono track, mono clip, 5.1 bus. The puck is not inset into the Center channel. When I keyframe panning, the puck moves accordingly, but the volume lines do not. The lines stay in the center channel. Is this a bug? 

When I apply the Convolution reverb to a track and play the track, the playback slows down and I hear crackling noises. 

Sad not to see an update yet. Sometimes (especially with software) fixing one thing can mess up another.     

Hello Everyone. I have the Sennheiser EW 112P G4 Wireless Lavalier Mic. I have a few questions, please.I was told that It would be best for recording directly from the Sennheiser Into Canon 5D Mark4, to do the following:1- Inside the Canon 5D Manual Audio Dial, Reduce the camera Pre-Amp all the way down to Zero and go one click up. Technically, the Camera Pre-Amp is doing no work. 2- Inside the Sennheiser Transmitter, Lower the Sensitivity to somewhere around -12dB, and Inside the Receiver, Play with the AF Out, for example, +6dB, or higher. Keep playing with AF-Out, and Sensitivity until the AF-PEAK is not Hot. Someone else told me, It would be better to use at least 25% of the Canon 5D Mark4 Built-In Preamp, and 75% of the Sennheiser. Not to go all the way down, Inside the Canon Pre-Amp. Also, with my Sony PXW-Z150 Camcorder, which has an XLR Jack, I did some testing, and I noticed that the Sony Built-In Pre-Amp was much more Powerful than the Canon DSLR. I notice

Hello,      I'm on a Macbook Pro 2016, running Catalina 10.15.1 (64bit OS).     I upgraded to Audition 2020, and I'd like to get rid of all previous versions of Audition.      When I click on the uninstaller for Audition CS6, I get an error message saying that the Uninstaller doesn't work, and that I should contact the developer of the App. I've attached a Screen Grab.       I suspect the CS6 has associated files in several places (Applications, Library etc...).      Does Adobe have a 64bit version of the Uninstaller?     If not, and I have to do a manual Uninstall, could you tell me the procedure to remove Audition CS6 from all places in my Mac?      Thanks in advance for your help. Regards,Rajnesh

I'm trying to "Interpret Sample Rate" for a 192kHz track Audition recorded in 176.4kHz even though the header says "192kHz". Converting the sample rate won't work, first I have to "Interpret," but it won't let me as when I open the "Edit" menu the option "Interpret Sample Rate" is grayed out. I am in the waveform editor when trying to do this.