Audition

been recording using i7 laptop pc in audition cc and boya lav mic, the result was good, but recently the recording is not at all usable please help me rectify, i have posted a bit of the recording here.

does hard limit or normalization decreases the clarity of sound.

am in the middle of editing waveform a voice-over 90-minute file and suddenly when I hit the space bar the cursor snaps back a second or so and on occasion a whole para.  It has not done that before in hours of editing. Have I hit something accidentally. Anyone out there know, please.? Have tried everything including re booting

Hey. I bought a new Hard Drive and needed to reinstall Audition. But since then i have the problem that the Video preview is asynchronously everytime. If i start it, the Sound works perfect but the Video starts lagging over and over again (even with the lowest quality). I also have the problem that if i want to pause it, the video is still playing (but laggy) while the sound already stopped. It's even worse if i want to revord smth. I even tried it with older projects, which worked flawless back then. My hard drive also has no problems. This kinda makes cutting and editing impossible 😕😕 Do you maybe know a solution? I was able to temporarely fix it by changing the settings of my audio device and by starting it as an admin, but after i restarted it, it became asynchronous again and i cant do anything against it 😞

How can someone put voices of them in the background of me listeningto a recoding on my phone on Bluetooth

I tested a file by mastering (comp + normalize) and saved it incorrectly as my fine cut file. Unless I can reverse the master back to my fine cut file, I will have lost 4 hrs of yesterday's work as I over wrote the fine cut with the test master and then closed down!!! I have all the parameters of the compression and the normalization. Anyone had this happen? Mike

Hi everyone,   sorry for that question, if it seems primitive for you but I am completely new to this field and I just use AA 3.0. I need to analyze parts of my sample and check it for the average volume (dB) over a timespan of about 5 seconds. Is that possible somehow? Thank you very much in advance!   Regards, Anna

Due to some "Unexpected error" that kept ocurring, my inital attempt at posting was trashed. I received an audio file from someone, and this kind of anomaly appears several times throughout. It produces a pop when played, so I'm wondering if it is the result of a bad edit. But is there anything else that could cause this? 

Hey guys! Since the last update for audition and premiere pro, the dynamic link doesn't work for me, like for the exemple,  i'm on my premiere pro projet, and whatever the audio i choose, The option to open in audition is grey, i tried a lot of option, like clean up the installation, re install, change the projet, and nothing happen! I hope it's just a small thing I skip maybe, but if you could help, i'll be grateful a lot! My version are : Premiere 14.2 - Audition 13.06

Is it possible to "Punch and Roll" using AA CS6?  I'm not finding anything on YouTube. Thank you! 

Guys what is wrong with this program??? I record my voice, sounds good no problem, I apply effects and after when I listen to the audio sounds like a robot or noisy, if I listen again, sounds good, if I listen again, again appear this sound problem.... . Do you know a real answer to this problem? thank you. (  I have all settings very good...44hz 16bit btw)

I just got a new mac but the project I need is on my old one. Unfortunately, the old one does not turn on anymore. Is there any way to restore the project from Adobe Cloud or something like that so I can keep working on it on the new computer? Any ideas would be greatly appreciated, thanks!

Hi - I've used Cleanfeed to record a 2-way interview with a remote guest. Me and interviewee are on the two sides of the stereo track. The .wav sounds great when listened  to raw. They need to be split for editing. I have: extracted the two channels to mono filescreated a Multitrack sessiondragged R+L across (simultaneously) into separate tracks in Multitrack.Now, there is tremendous hiss and distortion. The R+Ls sound fine separately. I've tried this with 44.1 conformed and 48.1 import - same issue. Can you advise what to do here? What's the best import/editing process for this scenario? [remote two-way interview]Many thanks, Jules  

How can I copy paste automation envelope in audition cc 2018.

Hi, I use Adobe Audition CC 2019 on Windows 8.1 (Intel i7-4770 @3.5GHz with 16 GB of RAM). When I use the marquee selection tool to edit (delete or auto-heal) a spot in spectral frequency display, audio vertical lines are created after the edit (around the edit zone). The lines are bigger when I delete a spot and thiner when I use auto-heal. I must use the healing brush each time to erase the generated lines (each time I delete a spot). Is there something to do to solve this?  In the pics below, you can see before and after the deletion of a spot. Thanks for your help. 

Hi there!I want to remove silence at the end of multiple files in a batch process. But the Diagnostic tool can not be recorded in a script.Is there another way to do that or should i perform this task file by file.Sorry if that post has already been covered.ThanksThierry

Hi guys! I hope someone sees this quick because I have a project due tomorrow of an interview I conducted. I, unfortunately, had to record on my iphone and the interview was recorded in a restaraunt. I need to do some major background music reduction from the ambient Def Leppard song playing in the background. lol. Most video tutorials I find only help in reducing background reverb or minor ambience.  Iv'e tried selecting the noise footprint but end up having to make multiple selections and apply the effect a few times which makes the dialogue sound almost robotic and very low quality. Does anyone have some tips?

Hello everyone, I'm IgorIt's first time for me posting in the Adobe Community. Long time user of Adobe suite.I'm currently struggling with Audition.I'm working on a project with audio from Premiere via dynamic link.I've done most of the work but I've found myself most of the time waiting to Audition to load files, opening projects (it can take up to 5 minutes), even saving multitrack sessions sometimes can take up to 10 minutes.I've also frequent crashes and trying to recover the session from Autition crash recovery proves itself useless.The project itself is not so big, there are 10 stereo tracks in a 10 minutes sequence.I'm working on a Win pro 10 machine with 32GB ram, i7-5820k Cpu, SSD drives and Raid arrays, on a firewire Focusrite pro24 interface.Audition is up to date and all drivers are so. I find it buggy and really unstable, almost unreliable.Maybe there are some system tweaks I need to do (I've never had such problems with other DAWs)? Thanks for every tip, much ap

Como faz pra remover ou diminuir a intensidade da musica de fundo de um video ?Pois o audio vocal foi abafado pela musica. 

I use Adobe Audition CC, and recently the factory favorites, which included lots of things I like to use like fade out, fade in, etc,  disappeared from the favorites drop down menu.  I can't get them back even when I close out of AA and open it back up holding down the shift key.  How do I get the factory favorites back?   Help!!!! 

Hey guys, I'm in need of some major help as I don't even know how to explain the problem that I'm having! I've just recorded my podcast episode (30+ mins) and the whole audio jumps and cuts throughout. This is the intro piece for an audio reference. I'm using a Blue Yeti mic that's mounted on an arm, along with a MacBook Pro to record. This is my 39th podcast recording and I've never encountered this problem before. Nothing has been changed since my last recording last week. Is my episode salvageable in any way if it sounds like this? Or is there anything I can troubleshoot so I can re-record? Would love any ideas! Thanks so much 🙂

Hi all, I've been getting this weird intermittent blip/pop sound on dialogue audio and I have no idea why, its driving me crazy. I have included 2 examples below (example 1: blip @ "memoir", example 2: blip @ "affiliate"). This sound is not on the original audio files. All I've done is import the audio into Audition and cut it up a bit (the blips are not occuring where I've made edits). The blip/pop sounds seem to change location almost as if it is a sample rate issue or something. I've tried disabling all effects & the blips are still there. I've tinkered with different audio drivers, sample rates, re-installed/updated Audition, cleared space on the computer and closed other programs to free up ram.  One weird thing I've noticed is that the blip/pop sounds seem to not occur when I'm playing back the audio in the waveform editor but when I immediately switch to the multitrack editor and play from the same position the blips are there, even if there are no effects or

The mic inputs record fine. Everything works with. When I plug in a guitar, I hear what I'm playing in my phones. When I arm the track to rec there is no signal and when I record it captures nothing.

Hello everyone, I ran into a problem when recording video with a gimbal and I hope someone here knows a solution. The gimbal makes background noises when activated. After filming I want to cut the gimbal sounds out of the audio, so I made noise prints, 41 of them to be precise. I want to apply them every time I use the gimbal, but I can’t find an option to apply all prints at the same time. Is there a way to do so, because doing it one by one would take too much time?Kind regards, Nina

Hey all! Yesterday I got Virtual Audio Cable to work, then installed a SSD. When putting things back together, trying to put the VAC as an Output wasn't an answer. VB-Audio Input selection is in the Output. When I go to Audio Hardware, I have my mic in Input, but for the Output, it's the VB0Audio Virtual Cable Input. Can't seem to figure out how to switch them around. The same seems to go for inside the Sound Control Panel. I've tried uninstall/Reinstall. Any ideas?