Audition

I'm trying to adjust the gain effect with envelopes, but the graph only displays a range form -15db to +15db. Is there a way to get the graph to show a larger range, e.g. +/- 60db?

Hi. My Adobe Audition CC is due to expire on 6/1/2018. I have contacted customer care support to help cancel it as I do not want my card to be unnecessarily charged once the product expires. The customer care support chat team is taking too much time to reply. Please help!

Have a problem with several new work stations. The audio playback sounds great. However, the waveform in the sequence/timeline isn't showing much volume. The mic is at 100% in the computer. Using Adobe Audition CC 2017 with HP Computers and AudioArts Air1 Mixers. The installer isn't sure what the problem could be....

I noticed a potentially useful shortcut in Premiere Pro that I thought would be very useful in Audition: a keyboard shortcut to switch panels within the program (ie: Multitrack Mode--switch from "Selection/View" panel back to "Editor" panel). In Premiere Pro you can do this by hitting CTRL+SHIFT+PERIOD or COMMA, but there doesn't seem to be a corresponding shortcut in Audition. If this already exists please let me know, my apologies if this subject has already been covered.

Hello. Anyone know if I can upgrade my Audition CS6 that I purchased on 2013 to the new Audition CC?Thanks for any help/advice.tena

I have the Adobe Creative Cloud apps. Adobe is stating it has an update for Audition. However, it's not where the other apps are, but on the Home section. When I click it it brings me to the Adobe main page. It almost looks like Adobe Audition is now being sold as a separate app. I hope that is not the case.Thankfully, Adobe Audition still opens for me.

Hello,I have encountered an issue while recording some guitar. I have plugged my guitar into a boss me-80 effects peddle and also seperately tried using a peavey amp, and then using the record out audio cables, plugged into the microphone socket input on my computer.While recording, if i play a chord or play with continuous noise for more than 3 seconds, it will cut out prematurely as if its automatically dampening the sound. Another issue which may be the same issue is if I'm playing a riff where there is constant noise input, it becomes dampened and sounds as though its playing through a quiet radio.Any attempts to help are much appreciated.Sincerely, me.

Hi All,I need to give myself a crash course in Audition.  Would really appreciate some tips from the the masses on which features and functions I should focus on as I'm a little short on time.  I think my requirement is relatively simple!I have  [dj] set coming up which includes a few classics (house music).  I want to build the set and keep it moving at a certain level / pace which would be greatly helped by making some simple edits to the arrangement of the tracks, and in some cases the 'levels' of the track.So the learning requirement is how to cut and past sections of an existing MP3.  Some sections will be removed, some extended (such as an intro). And then how to tweak the base mid and treble before saving it back to MP3.Thanks in advance!

Hi.I just installed Audition CC on my MacBook Pro. Here are the specs:I'm using a Yeti USB microphone for input, system for output. I'm getting about a second of latency when trying to monitor for recording. I checked all the FAQs and support pages, played around with buffers and made sure Smart Monitoring wasn't turned on and I'm still getting a delay.I get no delay with GarageBand, even with two USB mics attached.I guess I could switch just monitor straight from the Yeti? That'd be okay, right? I'd like something a bit more flexible than GarageBand for podcasting and I was really looking forward to using a pro solution. I did search the forums, and Google, and the Adobe site, but nothing helped.Thanks!

I've got a recording where there's a repeated background ticking noise.. which is happening irregularly, but constantly. Is there a way to target this noise and remove it from the whole recording at once ? Same as with noise reduction. Otherwise the only option that comes to my mind is going trough the whole recording with the healing brush in the frequency view and remove it manually. Which will probably take hours though...

I am selecting areas in the Spectral Frequency Displa, mid Frequency and would like to slide selection over into place without having my mouse (Windows) move my selection up or down. Is there a way to slide the selection over, locking its horizontal frequency position?lets say make a selection from 3.6 kHZ to 1 kHz and want to drop it into same frequency range at a different time, but my mouse lifts or lowers selection slightly while dragging over. Sometime like tracing the sound I want to repair, move selection to good portion of Spectral visualization, copy, move selection back, and paste. Or just copy from good position, and paste over bad. yes, I can just move playhead and paste off of playhead position. I can also select from bottom or top of Frequency display and slide over with mouse and use bottom or top selection as anchor point while I slide. But is there a way to select in middle of spectral display and slide selection over horizontally without lifting or lowering?

I have a question about degraded audio moving from the original recording to a multitrack session. I have a WAV file voice recording I made on a Zoom H5 (sample rate 44100, bit depth: 32). The audio is clear and clean during Audition playback as a waveform, but when I bring it into a multitrack session using the Audition Podcast template, the audio deteriorates (e.g. breath and other artifacts accentuated). Any suggestions for troubleshooting?

Got many questions after watching Adobe's how-to podcast intro (How to Make Your Own Podcast using Audition CC | Adobe Creative Cloud - YouTube ). I'm seriously considering buying a 1-yr subscription, if not a monthly to try it out. I'll ask all my questions here, but if there's someplace else I should post these, let me know. All these questions are based on my unfortunate experience w/ Pro Tools (getting rid it!).I have used Adobe Audition 3.0 extensively, but need to upgrade as support for it has disappeared for many years now.For podcasts:1. Are you able to use previously produced wav files recorded at 44.1/16 bit, and bring those into a session where I have a spoken voice recording at 48/24 bit, without having to up-sample the 16 bit files? (Pro Tools forces you to use all files at same sampling and bit rates.)2. Can you switch between edit and multi-track modes to edit specific tracks with surgical precision? (Adobe Audition 3.0 allows this.) Thus, I'd be using plugins for noise

Can you recommend an engineer in L/A. who is adept in Audition?

First of all, it's funny how many post on this forum are about how to USE and ENABLE noise reduction. But my case is quite the opposite.I just made some recordings using my NI KOMPLETE Audio 6 interface and a good Sony condenser microphone.First I wondered about how there was almost no noise in the silent parts. I know that even though the mike is good, it still has a some audible noise, or you could hear at least some ambient noise.Then I took a look at the spectral display. There were "dark bands" that consisted through the whole recording, looking like there were frequency notches, one at 2.6kHz and one at about 6.1 kHz. The screenshot only shows a small portion, these notches are on every recording, regardless of the audio source. And everything above 8khz was cut-off almost completely (Yes, the recording is set at 48.000 Hz) but there you can see a tiny little spike above 8khz on the frequency analyzer.And after all, when listened to closely, you could hear those typical "noise re

I'm adding reverb to the last note of a music piece using a process I've followed before, laid out here: End Music Cuts with Natural Reverb — PremiumBeatNo matter what settings I choose, the resulting audio is heavily distorted during the fade-out. I have done this successfully with this same track before, but now it's adding what sounds like static to the fade-out instead of the intended reverb. Why is this happening? How do I get it to not happen?

I just discovered some large Audion temp while using WinDirStat.  Three files at 3.8Gb and a forth at 250Mb all dated a few days ago on 18th Feb.  I only occasionally use Audition, and on that day it was to convert several .M4B audiobook files to MP3.  As far as I can remember, Audition and computer were shut down normally after that session.This isn't a problem. I should be getting a newly built computer this week with a 500Gb boot drive (because the Samsung 960PRO doesn't have a 250Gb version) and the system will have 32Tb over 16 drives in total, but I'd like to know if these temp files can be deleted. I suspect there is an option to relocate Audion cache files the same as with other CC applications, and I plan to knuckle down and complete a Lynda.com series or two on Audition when the new computer is set up.  If I manage to discipline myself into keeping that promise (at the expense of using the Adobe forums in general) then I have no doubt I shall be bothering

This is a joint question with Premiere, I guess. On my system there is a HUGE difference in output volume when I switch between Audition and Premiere and many other apps. Audition is nearly twice the volume on the exact same file. Meters read the same in both apps, but output from the speakers is radically different. I am unaware of a way to adjust this in either program. In past releases I remember a slight difference in level, but this is very radical. Audition seems to be "loud" even compared to other software I use.Anyone know of a way to adjust this?

I have a MacBook Pro and use an external monitor. Perhaps it was because the last time I used Audition I had a much larger external, but now, with my smaller external, the Audition screen is pushed up and left too far and I can grab the top and to drag it into position. I can pull out the external, whereupon Audition fits nicely on my Mac, but even when made small, when I plug the external in, Audition resumes its original position. The View and Window menus don't provide for a solution.  I am going through some plist files but it's taking forever . . . any ideas where the screen coordinates are located?Adobe should provide for a menu option that pulls it into a usable position.

I'm hoping to get some assistance on this.  I've had no luck with Adobe support on this.We would like to internally use Adobe Audition to create Audio content. And then we would like to redistribute the created Audio content (PCM) as a part of the current QACT.WIN.7.1 Tool Product on Createpoint and future QACT Tool Products.We do not want to redistribute or embed Adobe Audition in the QACT.WIN.7.1 Tool Product.Is this something that we would be permitted to do with Adobe Audition CC?

This is the first time we've encountered this, so I'm not sure how to go about describing the problem or fixing it.In summary:  we received an audio file from our presenter, and the audio has a lot of corruption throughout. I don't know the right words to describe all the issues, but there's crackles and pops, and also big portions of what sounds like electric interference or buzzing, combined with a high pitched tone.The presenter records into a H1 Zoom Mic with SD Card. Then transfers the file from there to her pc, and from there to a file host where we pull it down.We've tested the file on two different machines, and asked the presenter to re-transfer and re-upload the file, but without any change. Obviously we hoped it was an issue with the file transfer process.I've uploaded a quick MP3 export here Audio Corruption help - MP3.mp3 - Google DriveIf you do check out the file, there's a few long pauses so bear with it.Our questions are:What happened here?Can anything be done to f

Hello!I have some audio where someone sounds a bit off mic. They sat further away from it than we expected and as such everything is a little hollow / far away. Does anyone know of any plug in's or settings in Audition which will make it sound, beefier!?Thanks

Hello,please excuse if this has been answered somewhere else already; I did not find it.Is there a way to put the channels (in my case: 4 to 5) of a single broadcast wave source fileinto seperate tracks of a multitrack projectwithout splitting them up into mono files first?(It just seems inelegant to me, because it would mean doubling my amount of source files.)Thanks so much in advance!

Another growing pains question moving form 3.0 to CC 2018 - I'm grown accustom to quickly accessing effects with a click of a little graphical button in a horizontal toolbar across the top. My most common quick-access requirements wire the different EQ options buttons, the "dynamics" button for launching the compression options, and noise reduction. I also used things like Zero Crossing, Save As, Save Selection As, and several other buttons. The pictures on these little buttons are so familiar to me and are a part of the way I work.Is there a way to get those little buttons back? If not, how can I set up quick access to these effects and operations so I don't have to go to the menu, choose the dropdown, browse my choices and click a text-based action?Thanks!

The title of the discussion pretty much says it all with the exception of, I am using a dual Xeon Quad core configuration with 24 GB of RAM and a 1 TB SSD so I would not think it is a lack of resources or processor issue.I did not have this problem when I was using CS6. Any ideas ?Thanxx SHERMDOG Studio