Audition

1.  I cannot get my microphone to work now CC 17, up until last week everything was fine....what can I have done? I have checked everything and all looks as it should.  I have been using Audition for years and everything is set up correctly - as far as I can see, yet I have no sound going through the sound card.  I can hear myself in the headphones but nothing on the metre input signal.2. When a multitrack has been made CC17 will not let me export it into a single .Mp3 - why is this.I wish I had my previous CC6 back - I have had nothing but problems with CC17

Hello. Is there a way to reduce the volume of someone speaking in Audition? I used a lav mic on someone recently & he spoke extremely loud so everyone could hear him. Had I known better, I would set the volume lower on the microphone to prevent this from happening. Any tips would be appreciated. Thanks.

We're trying to save an audition file as a different file type, as in not an adobe audition file. It won't give us any other options when we go to File, save as. Help?

A few months ago, developers reported some progress on supporting PreSonus Faderport (either natively or using Mackie). Any updates??

I have sound with a wide dynamic range across 3 tracks in the CD track sense. It's sort of music. But, it's generally too low. I need to get the average and increase levels appropriately so match loudness sounds like what I want.I'm probably far from understanding what the different standards mean. But, I'm hoping to proceed before fully understanding all the details.If I try to match a standard and loudness radar shows the result is mostly too low (in, umm, loudness) is there a relatively simple explanation of what needs to be done to make the result match the standard?

Hey guys, so the other day I decided to try and capture a recording of my car exhaust. I used a Go Pro with an external lavalier mic positioned on my back bumper.For the most part it seemed that the audio was decent with the exception of some slight wind noise (fluttering, hissing?) and distortion under hard acceleration.I'm not sure if it's possible to "clean" this up in Audition to make it sound a little more crisp. I'm a new user to the Audition suite and I have little to no background in audio editing. I found some tutorials online on clearing up distortion and hissing etc. I've viewed the spectral pattern and tried to eliminate certain frequencies but the audio always ends up sounding unnatural, hollow, and almost like you're listening to it underwater.What would you guys, the experts, recommend doing?Here is a sample clip:https://ufile.io/44dbb If someone can take a quick shot at cleaning it up and letting me know what was done I would be very grateful!Thank you!

Hey all!So, I just got the new H6 Handy Recorder, and the first time I use it, something goes wrong. I'm not sure if the file didn't wrap at the end, or what, but I couldn't get the audio file to play off the card until I put it through VLC and saved a new version. However, this recovered audio sounds terrible, and nothing like the two other tracks I recorded that day. I'm not even really sure how to describe the sound; it's just bad. I would upload the file, but I can't figure out if that's an option here. If anyone has any advice on how I can remedy this situation in Adobe Audition, I would greatly appreciate it. Thanks!

Hi,First time using Audition to master audio on a film I've been editing.I have a lot of multi channel Wav's. Question is how do I edit channels individually?i.e. one section has 4 people miked, ideally I want to be able to mono each channel and cut out parts of a certain channel that are dead etc.I've seen a work around where you can split out the wav in a bin but this won't work for me as I would then have to pain stakingly edit those channels back in to the timeline.Is there a fast a clean way to do this?Thanks,Dom

Greetings. My audition 1.5 on windows 10 was not recognizing the CD rom to write a session. It was suggested I remove then reinstall the program. When trying to reinstall, the process is halted citing the data1.cab file is corrupt. The original CD was for cooleditpro and was badly scratched when I upgraded to Audition 1.5. So, I have the Audition 1.5 and my serial number and that's it. I live in a rural area with very marginal satellite internet service, so I rather stick with what I have instead of the cloud.How do I fix this??Thank you.Tony

Hi. I recently (about two months ago) purchased a new Scarlett 2i2 (gen 2) device.I have the latest driver installed: Focusrite USB ASIO driver (v4.15).The laptop I'm using is also only about 3 months old and I invested in fairly powerful hardware, so I would not experience any issues when working with audio and video programs. For audio, I am currently using Adobe Audition.I am able to get to what seems to be very close to zero latency, but only with setting the buffer size in Audition preferences to 256 samples.For some reason, given the hardware I have in my computer, I was sure I would get zero latency using the Scarlett 2i2 with buffer to 512 samples, but when set to 512 there is small but noticeable latency.My computer is a new Sagar laptopWindows 10 Home 64-Biti7-6700HQ32GB RAM500GB Samsung 850 EVO M.2 SSDthe Scarlett 2i2 is connected via USB 3.1 (gen 1)I sent an email to Focusrite and this is their response:Quote:It is not possible to get zero latency through the DAW, as this i

I have used the noise reduction process numerous times, however I am by no means an expert on the matter. The defaults almost always work very well for me, however today the process has stopped working and removes almost all sound from the audio. This happens on all the different files I have tried as well. It occurred abruptly without me changing any setting that I was aware of.This happens when I use the link from premiere pro to render and replace with a clip edited in audition. I have reinstalled audition in case there was settings I had changed mistakenly as well but this did not solve the problem. Is there anything obvious that I am doing wrong? I have uploaded a video showing what happens, as well as a screenshot of the settings.

Hi Everyone!I am working on a personal video of my wedding. I was able to get all the raw footage of the ceremony so I can make my wife a video of the ceremony for our anniversary. Unfortunately, when my ceremony was recorded, there was no serious sound equipment that was used. I have sound from one of the video cameras that was able to record pretty much the whole ceremony. The bad part is that it was recorded from the back of the church (top). When I double (even triple) the dB I get some decent sound, but a lot of echoes and high pitched humming (how it used to sound recording to a cassette). I was wondering if anyone has any pointers to get rid of the background noise and echo so I can give my wife this gift. 😃 Thanks in advanced!

Hello,I am hoping to find clarification regarding what happens to a 24bit file each time it is saved and re-saved after editing using a 32bit (float) DAW. I am not mixing in a multitrack environment, but editing the actual waveform. The sources I work with are primarily LP (or 78) records, cassettes, and reel-to-reel.My typical workflow for an LP record for example:1. Record source at 24bit/88.2kHz/-15dB-12dB dBFS as one file per side of source; save copies as-is across multiple external hard drives.2. Apply amplitude (clip gain) globally to both files, ensuring level consistency between both sides, and with that of the original source.Save each as "...24-88_EDITS_01".3. Open each "EDITS_01" and manually remove obvious clicks and pops, then apply light DeClicker - Save.Note: I try to avoid adding EQ to a record, as I am not trying to remaster it, only clean it up.4. Apply track markers - Save. Export track markers as 24/88.2 files - Save.5. Export track markers as 16/44.1 with triangul

I have been toying with switching to Audition from another DAW, but I have a general workflow question for those of you who use it regularly, since I find some of it's behaviors extremely non-typical.For example, why are imported files not saved inside a multitrack project unless they are actively in the project editor?Say I have some audio files on my HD pulled from an SD card, or another DAW where they were recorded. I open Audition to mix and edit, so I create a new multitrack session and save it on my desktop. Now I create a folder called "Audio" inside the session folder, drag the files I want to work with into it, and then import them using File -> Import.So, thinking my files are "imported" and my session is all set to go, I'm gonna grab a snack. I save and close.Then, next time I reopen that session, nothing: no files in the file view. So I drag one of the files into the editor. Then I save and close. When I reopen, that file shows in the file viewer, and the rest are gone.

Hi Smart People!I need to copy a few seconds of a quiet section simultaneously through three tracks of actors' voice over (in multitrack mode) and paste to extend the quiet section in order to fit in a sound FX on a 4th track.If you need more context... I am editing a drama podcast. I recorded 3 actors simultaneously, each with their own mic to control levels, but there is plenty of bleed--aka all 3 voices can be heard faintly on the other tracks. This is okay as I wanted to emulate Old Time Radio recordings.The actors played through all of scene 1, not even a flub...great! And I've been able to do a few ripple deletes to close up any unwanted pauses.  But, and here's my dilemma, at a couple points I need to insert a sound FX. The 1st sound FX lasts for 3 seconds, but the pause between the actors' lines is only 2 seconds. No worries, I think, I just need to select a quiet section through all three tracks, copy and paste, and voila I will have a pause long enough to add the sound F

hi, guys and girls,i have a litle problem with sound and i don't know where to start , i'm using audition for a month now [ still learning the program]is there is any filter that i can use to "clean" the Audio? or i need more 'professional Studio'?seems like Hight DB,maybe if someone can hear it:**the bad sound start couple of seconds before the endbadsound.mp3 - Google Drive

Hello,I am running Audition CS6 in Windows 7 Professional 64 bit on an HP dv7-7000 Quad Core Edition laptop. All audio files show a bump below 20Hz in the Frequency Analysis window. This occurs across all files, no matter the source, i.e., personal recordings, ripped Cds, etc.Here is an image using a CD file:What could be causing the noise below 20Hz? This occurs on any file type, no matter whether I'm using the laptop's sound card or a USB audio interface.Any comments and suggestions are greatly appreciated.Thank you,Eric

Is there any way to reinstall an older version of an Audition plugin in addition to the most recent one? I use the TMC on a lot of things but it has taken away the ability to add a decimal point to the ratio. Please tell me that there is!

HelloI've searched and search for an answer to this but can't seem to find oneI've recorded a simple interview between two people using two microphones. I have the audio in a multi-track session on 2 separate tracksHOST = Track 1GUEST = Track 2Of course, whenever the host speaks their audio is picked up by the guest's mic (on TRACK 2) and vice-versaI'd like to find a way of mixing the two tracks so that i'm not getting audio bleeding over into the other track.i.e. Host speaks, the guest track is muted (TRACK 2) and when the guest speaks, the host track is muted (TRACK 1)I know i can manually adjust the volume for each individual track but on a lengthy interview this would take a while. I'm also aware i can use a Noise Gate but i can't seem to get this to work how i'd like.Any suggestions very much welcomeThank you

So I'm having two separate issues with my Audition Project;I am working on a radio drama and the files are fairly long -- 15-30 minutes long. The issue i'm having is every so often (Usually when I open the project) random tracks will be muted. not on the track bar, but the actual clips, which makes it incredibly difficult to track down and unmute.Second thing is; I cannot render out master to adobe encoder. just won't work.Third; when I do a mixdown the file's time tracker is over 2 hours long. which, as i've said before, is not anywhere near how long my actual files are.

Hi everyone,I'm very sorry, first time posting here so I'm not sure if this have been adressed before.I'm having trouble getting rid of some reverb/echo sound around my voice after using "noise reduction (process)" (noise reduction 100%, reduction by 30dB). I'd like to have a crisp clear voice sound and not that echo, while remaining loud enough on a low to medium sound volume.I use a Zoom H1 to record (settings 48/24, input 100 (can't really hear otherwise) and a Lavalier Audio-Technica ATR3350.I tried to improve the sound through Dynamic Processing and Mastering and managed to work on it well enough that you can't really hear it, but the volume is just way too low. No matter how much I increase the volume, I still have to put my computer volume all the way up to be able to clearly hear the sound. Because I sync it with a video afterwards, causes huge problems with hearing properly. (see pictures below)Can anyone give me a hand on how to fix this problem? That would be very much appre

I'm trying to import these VST's into my Adobe Audition on a MAC computer. Does anybody know how, and if so can you please walk me through the process? Thanks.

Hi all, for a robot project I would like to make some Wall-E sounds. I've seen a tutorial ( #25 WALL-E Voice Effect :: Ableton Live - YouTube ) in Ableton Live, and an other one in Kyma ( I believe Ben Burtt was using this program ) https://jedsound.com/blog/?p=116 ) but was wondering if it could be done in Audition.Greetz, Dennis.

The January 2017 update for Adobe Audition CC 2017 (10.0.2) is now available. The 10.0.2 update contains important bug fixes and is recommended for all users. Updates for After Effects CC, Adobe Media Encoder CC, and Premiere Pro CC are also now available.See this blog post for details: January 2017 Update to Adobe Audition CC 2017 (10.0.2)  Is Now Available | Creative Cloud blog by AdobeNote: Restart the Creative Cloud application if these updates do not immediately appear.For considerations prior to updating Creative Cloud applications, see this document: Creative Cloud application, update, best practices, avoid disruption, smooth upgrade

When I record something in audition then play it back the metronome timing is off. Also when I go to record something else, the time is off from the original recording. I've seen this in other recording software as well. Anyone know how to fix this? Thanks.