Audition

Hello,  I did my first oral history interview using 3 microphones run through a Mackie mixer output to a Zoom H5 recorder. I used two SM-58 and a SENNHEISER MKE 600 SHOTGUN using the phantom power switch of the mixer. I will say that I am not a professional sound engineer but have had some experience in the past. I tested all the gear out ahead of time as well but did not expect to get feedback. I am also just learning Audition. My hunch is that the feedback might have been caused by the reflective surfaces but that is all it is at this point. No speakers were setup so that can be ruled out as culprit.  The interviewee was captured on the left channel (Sennheiser) and the two interviewers (SM-58s) were captured on the right channel. We recorded it in a library with no sound dampening. The microphones were set on a wood table with their windscreens. I set the gain on the Zoom recorder to 8 to achieve about a -12 db level. The output of the mixer was set to 0 and the

I'm working on a project that has a number of effects laid in to get a vintage radio sound for a video. I'm not done with the script yet but have worked out the audio effects as I'd like to use them. I'm not seeing how to save this non-destructively so I can come back later and record different narration then apply the affects I have in my rack right now. This seems incredibly basic so I'm assuming I'm missing something pretty obvious, can someone point me in the right direction? Thanks! ~Ross

Hi everyone,My y axis is almost non-visible. I would like to amplify it, so I went to Effect > Amplify, but it amplified the sound not the visual waves of my file. How can I amplify the sound waves so I can see them ? Thank you in advance,Tennessee

You can customize your community profile by clicking your profile avatar and Editing Your Community profile. Your profile picture and screen name will appear on the content you publish and in your private messages.   You can update your profile picture. You can pick a new custom screen name or have the system auto-generate a new screen name for you. The information you enter in the signature section will appear in your posts. Using the toggles, you can choose to display your online status and to make recent activity on your profile public.   Information under the section “Add more to your profile” can be edited and will be made public only when you enable the toggle “Show all information on Community Profile.” This is your public profile information from Adobe products and services such as Behance and Lightroom. Updating this information will propagate everywhere.    Enter or edit your First Name an

Hello, I am trying to use the Schoeps Double MS plugin with Adobe Audition 2020.  I am able to use the plugin and it seems to be splitting the audio the way it was intended.1. Set channels 1, 2 and 3 to front, center and rear mics respectively.2. Add the plugin to the effects rack3. The plugin opens and seems to split the channels properly, everything sounds like I expect it to through my system (Focusrite Clarett 8PreX thunderbolt device with Yamaha HS8 Monitors, one per channel, Windows 10, Razer 17 inch laptop with thunderbolt connection and Adobe Audition CC 2020).  I can hear the surround mix and use the plugin to change the stereo image without issue. The problem I am having is how to export this to a new multi track session?  Applying the plugin doesn't seem to stick the stereo configuration as expected. Any help would be appreciated. Kind Regards, Jason

Hello,In multitrack mode, I have some instrument tracks, and I am sending some to a separate reverb bus, all of which goes to the main mix. My issue is when I'm jumping around with the cursor, the new playback includes the remnant reverb tail from the previous playback stop point. Details:I play a section with music. I hit stop, all sound cuts off, including reverb tails. Then, i move the cursor anywhere else, and specifically, let's say a section without sound like the very beginning or end. When I press play again, I hear the rest of the reverb tail playout from the previous section I was playing. It doesn't matter how long i stop the playback for, when i restart it plays out the rest of the reverb. If i quickly stop, and then start again, the reverb will continued to play out. Is this normal? If I scrub in an empty area of the mutlitrack edit, I hear the reberb sound scrubbing until it dissipates. If I mute the reverb bus at any point, it doesn't happen.  It's happened for

I get this pop up no less than 50 times a day!  It happens when Audition is open and when it's closed.  I've checked for updates.  I'm running the current version.  Happening to anyone else?  Got a fix?

the application was unable to start correctly (0xc0000142) for adobe audition. i googled and tried different methods here in the adobe community, unfortunately didn't work. Can anyone help me how to solve the problem?

Is there a way to copy & paste keyframes in Audition?I have a revised music track but the rest of the audio is the same. I'd like to copy the volume keyframes from the old music track to the revised track, as the dips will all remain the same for the revised track, rather than doing all the work all over again.'Seems like this should be a simple copy/paste attributes but I can't find any option to do that.Am I missing something somewhere?I'm using Audition CC Build 11.1.0.184On a mid-2014 MacBook Pro running High Sierra 10.13.3Note:  I'm cross posting this to Adobe Feature Requests as I believe this should be a feature.Thanks!~ART~

Hi everybody. Please help me with the problem in adobe audition. I made a gradual overlay of the effect on the track through the bus, but the effect is applied before the points begin (and end), which show the place where the effect is applied. I will be very glad if you help! 

Hello, I have a multi-hour audio file that contains several commercial breaks. Each commercial break begins with a unique 3-second sound clip. Is there a way to use this distinctive sound to locate all other instances where the commercial break occurs? Are there any tools or methods that can help with this?Thanks for any help.

Hope someone can help, I'm trying to add a keyboard shortcut to open the hardware preferences, because I frequently swap between headphones and external speakers and it's a pain to have to keep going in manually. (I'm on a mac laptop.) Looking online it seems the shortcut Command Opt ; should do it, but this doesn't work for me. Trying to set up that shortcut manually, promisingly I seem to be able to add it to the keyboard shortcuts, but when I click OK and try it, nothing happens, and it's not there when I look again. Curiously I have a couple of shortcuts set up for keys 1 and 2 on my keyboard for 'cut' and 'autoheal', which work, but I can't see them on the keyboard shortcuts display, even though I know they are working. (I set them up ages ago, so can't now remember how I did it...) Would be so grateful for any help.  

Hi all,so when doing Batch corrections in Adobe Audition it happens quite often, that the new generated file has parts from a different position in the song or even errors at the end of the track added. This issue is not soved ever since Creative Cloud happened to be a thing.BestArne

Hello Guys,delete silence doesn't cut the clip with it.i have nested sequence -> i delete the silence when i comeback it's only the cutted audiowhen i play the video, it's all non synchow can i make it so that the cuts happens on the video too ?thank you very much to whoever helps

Just got a new Dell PC with Windows 11.  The external mic won't work on it.  I only can record myself with built in mic.  I did not have this problem with my old PC, which had W10.  Can anyone give me advice on this?

Buen día!  Adobe acabas de sentarme sin que yo haya podido usar el programa, porque no más es incompatible con la versión de descarga y no me permite bajar el software de audition. Cómo piden de tan ladrones? Me debitaron igual de mi tarjeta sin que yo esté usando el programa y sin poder hacer la descarga porque mi máquina es obsoleta según sus requerimientos de sistema, Quien me devuelve mi dinero??? Cómo hago para darme de baja de eso??? Ayuda por favor!.

 I get this message when trying to open an Audition project:Error: Media Foundation reported an error when opening the file.The byte stream type of the given URL is unsupported. And the project won't open.How can I solve or go around the problem?Best regards from a sunny Copenhagen

Hi, like in the title. How to disable this popping out window with 'Save changes to ... before closing' when trying to close Audition while using Multitrack?

 Now I have a problem using Adobe Audition. When I load the audio file into the multitrack session, I can't adjust the volume line.  Please help me /Thank you

I have Audition 5. I truly love it, but all of a sudden I am receiving messages in Channel Mapping. I do see my Onyx Artisit 1-2 showing in Audio Hardware (still I get the message of: The device settings could not be applied because the following error occured. MME device internal error. The last valid setting will be ued. {that never happens}).I can see my Onx in default input/output/masterclock.In Channel Mapping, Device Microphone (Onyx Artist 1-2) Not WorkingNothing showing in the two channels below that.In Channel Mapping, Device Speakers (Onyx Artist 1-2) Not WorkingNothing shnowing in the channels below that.When I go to exit that (olut of frustration), it states: The last valid device settings could not be set. Please check your audio hardware.(Which we go to the top of this and round and round). I am lost and frustrated, and far from a tech. Had this working so well, and it is my release/distraction from issues. Love my music, love Audition, and this has me so flabbergass

I am running Audition CC 6 on a 2013 MacBook Pro.  I have re-installed and made sure I am fully updated...but I can't do the most basic of things...like edit a .wav file.   What silly thing am I doing wrong?  No razor tool selection or any manipulation of the files I bring in...  I have double checked that read/write permissions are set correctly...the files play in Audition just fine. Any ideas?

Hello all,I've searched the forums and found similar discussions but not sure I am using the right terminology so I wanted to pose the question just in case.I just received a video to produce. It was recorded at a conference and the speaker was using a handheld mic. Other clips include speakers who used lav mics. The lav mic audio came in fine but anyone that was using the handheld, the vocals sound like their clipping but when I open the file it doesn't appear to be clipped. In the video, the speaker isn't holding the mic too close.I'm fairly new to Audition as the audio i receive has typically been produced before I ever get it. I know it wont be the same as capturing it right during recording but I'm hoping to at least clean it up a little.I've uploaded a very short clip of the audio for an example: Dropbox - Audio Extracted_01.mp3 Also, since they'll be sending me more files in the future, what guidance can I give them to pass along to the sound person to ensure the handhelds come

I want to use  Mark Silence in Dialogue automatically in my extension, how can i do? Which interface shoud i use in c++?