Audition

Hi AllI have a really annoying problem with my Adobe / Rode combination. When I select this combination of Input and Output, Adobe doesnt work - its as though the mic isnt connected.As you can see, the input and output is selected to the Rode AL-1 and device manager is showing that both the input and output drivers are installed correctly. Also, there are no problems with the IRQ's. But when I select this combination, it works fine but I dont get anything coming through the headphones (which are plugged into the AL-1).The Rode AL-1 is using the USB AUDIO DEVICE DRIVER for Sound and the AL-1 is using the AUDIO ENDPOINT DRIVER (two enteries in device manager) for the mic input.   I have now come to a dead end. So has anyone got any ideas? Thanks  

Hello, When I split a track in audition 2024 and make the edits in the clip and then connect the clips together (before merging to make sure it sounds good), the clips easily glide across one another and overlap. I noticed they no longer connect (like tetris), but I have to zoom in to the minute second in order to connect the two clips to make sure the conversation flows (before merging). However, not too long ago - maybe a month or so (could have been while I still used Audition 2023), clips that were split easily came together. Like tetris, they clicked together without me having to zoom into the fullest magnification as possible, which made editing and clipping much smoother. Is there any way to see the latter in Audition 2024? Or any suggestions? Thank you, Nicole

Hello everyone, I posted about this subject in the Adobe Premiere forums to ask how to fix this, but I also want to know in Audition if there is a way for me find these errors in a simple way.   After rendering (in Premiere Pro) I can randomly get audio popping through the file. This audio popping doesnt show up in the edit, and it's really random after rendering, some renders turn out fine, and some turn out damaged, without changing a thing   Here is the spectral in Audition of 2 rendered versions (havent changed a thing, one turned out bad, and out turned out good)   There is a giant line right when the error happens (in 6:35,6). This is the same part, without the error.    Is there a way for me to know the file have errors without having to visually look? Or listen to it? Because sometime in longer files is a problem to have to listen multiple times after rendering until I get a good render   Thank you

I often want to move audio and at the same time move the markers I have placed over that audio. I can't figure out how to do this -- which renders the markers much less useful since, once a piece of audio is marked, I have to leave it where it is or lose the marker.How do you select audio clips and markers at the same time?

Hi all, Is there some sort of keyboard shortcut for "move to marker #" ? I know there are for "move to next/previous" marker, but if I have several markers and need to get to different points immediately, I don't see a way to do it via shortcut. Specifically, I want to add this shortcut to my Stream Deck so, if I'm playing back different cues on my movie set, I can do it in an instant. Any help would be appreciated. Thanks in advance. 

Hi, I am a beginner, I have a recorded voice track and a sound effect track in parallel, it really short only 9 seconds long but when I press play, the line or recording still carries on in silence, how do I cut short the recording to what I have?

Hello! Really hoping someone can help before I tear my hair out. I've been frantically searching the forums and googling, but I can't find a really simple troubleshooting guide / steps. I bought a Windows laptop rather than a Mac for Audition as I'm more familiar with windows so thought I could get started faster. I've had an absolute nightmare getting it to record single track audio in Audition. I'm struggling with how to set the mic input level in the windows settings. Too low and I'm yelling into that mic even with gain turned up on the audio interface. If I turn the gain up too high the levels are ok but I get distortion and hissing in the recording. There may well be something else going on too but I don't know where to start with checking. This is my Windows spec: OPERATING SYSTEMWindows 11 HomePROCESSORIntel® Core™ i5 12500H (12th Generation)MEMORY16 GB RAMSTORAGE512 GB SSDDISPLAY39.6 cm (15.6"), FHD (1920 x 1080), 9 ms response timeGRAPHICSNVIDIA® GeFor

After sorting out several past problems, Audition works great for me. Nice and quick. Unless, however, I have too many clips in a multitrack session. I can open a new session, bring in a single (albeit long) WAV file, adding no effects, and once I start cutting that file up into clips, it eventually gets really sluggish when it comes to dragging clips around. Once it's a couple hundred clips long, It can take around a half second for Audition to catch up when I click and drag a clip somewhere.Does anyone else have this experience? Is there anything I can do to speed things up? I work in a similar fashion in other programs like Sony Vegas and Reaper, and they don't experience this very significant slowdown.

I am working on a project where I have to analyze 3 video files and 2audio files' frequencies simultanously; all of the wav files have information up to 98kHz.  Does the spectral frequency display go high enough to display 98kHz?If so, is it possible to view 2 spectral frequency displays with 3 streams of video all playing simultaneously? Any help is greatly appreciated 🙂

Hi everyone, I'm trying to clean some audio files for a short video I've made, we record with a F6 and the sound engeneer has recorded the tracks in a multichannels file, the problem is that when I try to open a file from the multitrack to the waveform to clean it up it show me this message on the noise rediction panel: "The channelization of the current noise print does not match the channelization of the active file. For optimal result, capture a new noise print from the active file".of course I've capture the noise print from the file I'm working on and I don't know what to do 

hi there, is there anyone who can help me?I had an important interview with my host and I clearly remembered that I had already saved it completely. however, when I tried to open it the next day, the file only saved the very beginning part of the origin (the whole recording should be 1h but only 1 min. left!!) here is the clue that I think might cause the problem: my C disk doesn't have enough storage to contain a huge volume recording but I didn't see the warning while I saved it. I have tried any method that I could find on the website, ranging from downloading the transfer, using some software to retrieve the corrupted file to trying to find a backup on my computer. it is very weird, I'm sure that I have saved it completely according to the type of backup i saved but i can't open it since audition showed that it didn't support the form of the type stream

We brought in a new voice actor for a studio recording.  He is a singer but had never done voiceover work.  Even double micing him (416 and TLM 103), trying every manner of angle and positioning, we could not help but pick up these weird nasal squeaks (almost like nasal "farts" heh).  If he held his nose, they disappeared.  I've never seen nasal sounds this loud before, and no matter what he did or what we did, they were littered through our recording. So far, I can't get them out, no matter what I do in post.  Anyone have experience with getting these out in post in Audition?  Or through any other means? I attached a brief clip of it via dropbox.  The recording is in Japanese, and the first one is on the TLM103, then the 416, then a separate clip from the 416 with a slight variation of the nasal sound. https://www.dropbox.com/scl/fi/5slpev507lyc631vr8zhr/Nose-sounds.m4a?rlkey=95785fbgybfuczmod28k2b008&dl=0  

Hi,Does everyone know how to reduce the breathing sound in a podcas with audition please ? Thanks a lot !!

I record a track in Mutitrack, pull it up in Waveform, adjust the volume, and the audio disappears!  When I re-call it up in Multitrak, it appears the audio is there, but it will not play.  Going back to Waveform, the track is empty.  Have I lost this track permanently?  Why did this occur?

Hi;Isn't there any way to export only the preset that I created on my own to send it to another computer? (Someway, same premiere.)gratefullyMartin Miciciday

My Audition's Primary Temp folder (Audio Disk Chache) is very large (amostly 100GB) with files going back almost two years. Is it safe to delete some or many of those old files? Or even all of them? My Secondary Temp, on a different drive, is completely empty.

Ever since the latest updates, I keep getting an error where it tells me an issue with my hardware has come up even if I am in the middle of using it. It typically happens after i export something. I never had this issue before the latest update, and now this will happen several times during a session where I need to close and re open. I have checked the hardware and nothing has changed on my Hardware.   

 I accidentally pressed something and messing with the undock, and the history tab and consequently resulting in this black screen which confused me greatly.  After using Reset to Saved Layout the screen returned to this.But this one is my actual original section but after pressing it it resulted in the black empty screen again. I'm confused to what problem I'm having and is there a way to recover my progress in my original file. Hope you guys could help, thanks!

I just updated from an older version of audition to the cloud...the audio is on the track...you can see the wave forms and you can see it in the meter.  Why do you think I can't hear it?I can hear other audio on my computer  both in programs like premiere or just on the internet.  Thanks for your assistance.