Audition

I want to use the levels window to monitor, well, my levels without getting the audio playback from it. Anyone know how to not get the playback?

Hello,  I'm running a 2023 Macbook pro with Audtion 2024. I created a project with recorded audio files and exported a mixed MP3 to use for a podcast. (everything went fine) The IssueI needed to make a few edits to the project and it will not play sound. I have the file saved in two different locations. (desk top and external hard drive). Neither location will play sound. The imported files that are a part of the project will not play either. However, other auditon project will play without issue.  What I've done to trouble shoot. Updated auditionrestarted computertried to use a back up from projectchecked audio hardware preferenceschecked computer soundtested different projects (sound worked)  

Just recently got a Mac Studio 2 Ultra(came Sonoma already installed) and I'm running Audition 24.0.3.3.  I tried to install a Presonus Studio 68C with it today but cannot record on it.  The Presonus hardware and mapping is showing up in Audition and I'm getting sound through the headphones and speakers but nothing when I try to record...just a flat line.  I'm afraid it's a Sonoma issue but hoping it isn't.  Any feedback will be appreciated. 

Hello, I'm having issues with the audio quality of a recording. I'm using a Pyle PMXU43BT.5 4 channel audio mixer with two Donner DC20 Condenser microphones with XLR hookups. The Pyle Mixer is connected to the computer via USB. I'm getting this odd kind of distortion or something in the recording. Both mics have the same issue which leads me to believe they're not faulty and no matter how much I mess with the gain, levels, etc. the problem is still there. No better, no worse. This leads me to believe it's probably Audition that's the issue. I'm using the 2023 version if that helps.I've linked to a video here with the audio so please take a listen if you think you can help. I also have some pictures of my current settings as well:Thank you in advance, this is endlessly frustrating.https://youtu.be/O1e7WK-wOfs

Hi, after exporting my project, my .wav file is clear for the first 7 minutes or so and then I get extreme brown noise. If I export a time selection anywhere in the project- same thing, first 7 minutes are clean and then the "jet engine!" I've removed all third party plugins and pre-rendered all tracks. Help appreciated.

File displays waveform, but plays silence.mac OS 12.4, Audition 23.3This has happened a few times, and I'm at a loss as to "why."A student records a podcast on my SD MixPre. Copies the file onto an external hard drive for editing. Imports the file into Audition. Uses it to create a multitrack session. Edits the podcast. Saves, exits, hands me the hard drive.When I open their multitrack session in Audition, I can see the file(s) on the timeline. They clearly have waveforms, good levels, should definitely have audio. But when I play it, there is only silence. Nothing moving on the meters, either on the individual track(s) or the main output. If I double click one of the files on the timeline, or from the Media bin, it opens in the waveform editor. Again, the waveform is there, but when played, only silence. No flicker whatsoever on the meters.Using "reveal in Finder," it shows the file on the hard drive in a subfolder called "Imported Media." If I preview that file, or open it in other m

Hi all...Is Audition able to conform (not sure if that´s the term, I apologize for my English) editing changes from premiere? In order not to have to redo the whole sound part.Thanks a lot

I imported every track I need and can hear them. But for one of them I can't hear anything from it at all? is there something I can do to fix this issue? 

I updated to version 22.3 recently and ever since then, the CTRL + Tab or CTRL + SHIFT + Tab functionality has been broken. It pops up the list of open files for half a second and then that goes away and it doesn't swap to a new file. I've remapped the buttons for Switch to Next File and Switch to Previous File, rebooted, uninstalled and reinstalled 22.3 and nothing seems to have worked. I finally uninstalled 22.3 and re-installed version 22.2 and now it's working again, which leads me to believe it's something wrong with 22.3 and not my computer itself. Or, at the very least, something weird in 22.3 that doesn't like my computer or Audition configuration or something. Has anyone else run into this issue as well? It really broke my workflow until I got 22.2 back again. I'm running Windows 10, if that helps.

Hi all, Is there any effect in Audition that lets you compare two channels and automatically lower (or remove) the leaked in audio from the other channels. So the voice of person 1 is automatically lowered or removed from channel 2, and vice versa.  I have decent michrophones but the setup is not perfect and a lot of audio spills over from the other person at the table.  Using Audition 24, Macbook Pro.  Thanks for any help.   

Any volunteers?Adobe offers no way to report the myriad of bugs.  Because of that, those bugs stay in the software version after version, year after year.We can't change that but the community could setup an outside issue tracking system which would at least provide workarounds for the bugs that have them. Any volunteers?

Hello, I am unable to export a sesx multitrack session into an OMF file. Always fails and says 'unable to open a required file'.I am editing multiple episode of an audio play and the 1st and 3rd episodes worked just fine but the 2nd is the one that refuses to work. I tried exporting the OMF as referenced as well as encapsulated. All my files are located in the same folder on the same drive. I even split the project in half and tried exporting the first and then the second half and both failed as well. Wonder what I am missing here. Thanks,Bjorn

Hello, I just recorded an audio session that was about 2 hours long. Once I stopped the recording, the file time was only 35 minutes long and the audio sound is being played back very fast and high pitched like the "chipmunks". What would cause this to happen? And How can I get it to go back to normal.  I have tried these things but nothing sounds normal as a fix. Changeing the preferences/playback and recordings - JKL Shuttlespeed to half speed then using L to slow it down. This did bring it down a bit, I can at least understand the words but it is still way too fast.  I have also played around with the Effect - Time and Pitch process - I could probably tweak it a bit to make it useable to transcribe the words off of the recording, but it isn't the natural sound of the recording.  Why did this happen and What can I do to prevent this from happening again??? Thank you for your help! btw: using Windows 10, Adobe Audition build 13.0.2.35&

Hello,Have a four track podcast recording. The sound information is there but:1. Can't hear anything on playback2. No sound information on the level meter while attempting playback3. Export>Mulitrack Mixdown>Entire Session: only exports silence.This was a student group recording in a University. When I came in to do a separate recording everything worked normally. So I can't figure out what these students might have changed to get to this circumstance.Imac Ventura OSPreSonus Studio 192 Audio InterfacePreSonus Faderport 8 Control Surface.Thanks for any adviceRobert N  

I am mixing a song in Audition and I recently obtained antares unlimited.  It allows me to use the plugins via VST3 and I have applied Auto Tune Pro to the mix and have tuned the mix to my liking.  When playing back the mix I can hear the auto tune working as intended and sounding great but as soon as I export the mix the auto tune does not export with it.  Every other effect is exporting but not antares auto tune pro.  Hoping someone one here may have a solution for this 

PLEASE HELP this is the THIRD time this has happened and I'm ready to cancel my subscription and find something more reliable. I recorded a session on multi-track and made sure to save the file properly beofre exiting the session. When I went back in to edit it later on, I kept getting this message: No matter what I do it wont open the file and I'm so upset!!!!! 

Hey everyone!I've recently updated to the latest version of Audition, but I noticed that since the update my backup's don't seem to be working.I lost all my edits on a multitrack yesterday after a crash. Usually I would go into the backup's folder and open up the newest version, and that would only set me back by a little bit. But in this instance, there was only one backup which was made right at the start of the session.The file itself had reverted to the same state as that backup, despite having manually saved multiple times throughout. So I'm not really sure what has gone on here. Could anyone shine a light on the issue, and if I have the incorrect settings or something?Here's what my current backup/autosave settings look like. I have plenty of memory space left, so that shouldn't be the issue.Also I'm working on another multitrack today and I've been keeping an eye on the backup folder to see if any are being made, and it looks like I'm having the same issue. I've also t

When it is moved into multitrack i does not playback, it looks like it is there but i can not hear it. In addition if the track is armed as usual and before starting to record (only happens in Multitrack) the vloume maxes out not sure how to fix this anyone help? I will post some pics of my settings if that helps.

I've downloaded the 2024 version of Auditioin, and it appears to be identifying any audio files that are 192 kbps and lower as variable bit rate files even though they have been recorded in constant bit rate. This creates a huge issue since when I am uploading a file to a production order and our auto-dub function tries to retrieve the audio and metadata to place in our automation system. It identifies it as a VBR file which causes our server to hang up rather than a CBR file which it is able to properly process. Is this a metadata or bit rate issue that is causing this to be incorrectly identified?

Bonjour,je rencontre un problème d'enregistrement de voix dans Adobe Audition. J'utilise la dernière version du logciel avec une carte son externe Focusrite et un micro branché en XLR. Le niveau sur la carte son module bien, le mixer audio de windows confirme que le son entre bien dans l'ordinateur. J'ai testé avec l'enregsitreur windows et ça fonctionne. Pourtant dans audition aucun son ne rentre ni n'est enregistré. J'ai vérifié la configuration du matériel audio et tout est bon. Est-ce que quelqu'un a déjà eu ce problème et a pu le résoudre?Merci.

Each time I use Audition for a project, I find a new way to ruin hours of work without even noticing. Clearly, I am the idiot that beat the idiot-proofing. On this occasion, the last 5 minutes of an audio dialogue track have acquired a strange and displeasing robotic sound. I have applied no effects, and by studying the waveform I can trace the problem back to something I did about 4 hours ago: using Global Clip Stretching to speed up the workflow to 64%, then merging two clips, before restoring all clips to original speed of 100%. As a result, the merged clips at the end have been permanently ruined. Some audio information from the last 5 minutes of the track has been lost by the speed-up, resulting in robotic distortion.On the above image, you can see how the waveform has been finely chopped up. After much searching I can't find a way to repair this (or even restore the original dialogue track!). Is there a tool or a trick to do this? Any help would be greatly apprecia

Hi thereWhen I use the insert function on the recording button it is constantly cutting off the beginning of my words. Any fix to this? Also when I share my sound in Zoom, my participant is unable to hear my audio when using audition. They can hear it with any other DAW. Thoughts? I appreciate any and all assistance. Cathi

Hi Folks,    I had an older version of Adobe Audition.  There are two things the old one could do that my new version seems to not be able to.First, I could swap channels - in other words, in my Channel Edit on any stereo track I could easily swap channels.Second thing, in my older version, I could highlight the left or right channel and edit either or - adjust the volume, or whatever else.Can't seem to find how to do either thing.