Bridge

After importing images using Bridge I receive a message stating 'Maximum Tabs Open'. Not sure why and what it means. Help/Advice please.

When using Bridge Metadata panels, the panels do not open in the same order as when they were closed. This requires me to re-open the panels, every time I launch Bridge  - a waste of time. Bridge 13.0 & 13.02 do not update the keywords panel that is associated with each photo, when switching between photos. This occurs typically when keywords have been copied from one image and are to be pasted to another. It appears that the copy function in windows is interfering with this proecess. Lastly, the new interface for metadata is too large, it resticts the amount of data that is viewable unnecessarily. Can you just give us back the previous keyword/metadat panel, this upgrade was a step backwards...

Hi! After update to the new Bridge version 2023, I can't run the program. I have this message and then, program is close down:   Sorry, something went wrong. This is likely an issue at our end, but it could be that you’re not connected to the internet. Please check your internet connection and then try again later. If you’re still having issues, please see our troubleshooting guide. Any idea? Thanks!   {Moderator Note: Edited the thread title]

Sinds de laatste update van Bridge kan ik deze niet meer openen. bij aanklikken krijg ik een zwart scherm met daarin een kader met het woord Bridge, een roodbolletje en OK. na verwijderen en opnieuw installeren verandert er niets. Wie kan mij helpen.   {Title edited by Moderator}

When I try to open bridge on my PC via photoshop I get the following error message - was working fine on Friday anybody know a fix ? email [REMOVED BY MODERATOR] - Thanks      [A moderator removed your email from your post becuase not everyone who visits these forums is a nice person. Please be careful about what you leave in a public forum]

Bonjour, Bug, déjà signalé - non corrigé dans la version 13.02.636.En Français ( et en espagnaol aussi je suppose, et toute autre langue avec accents) les caractères accentués viennent à la fin dans la liste 'Filtrer' -   exemple : après le terme Bytown, j'ai : Bâle, puis Béatrice, puis Bénares... etc.Les mots clés avec majuscules sont d'abord listé, puis les minuscules - exemple : après Zurich, j'ai abattage, abbaye, abeille, etc. Lorsque l'on sélectionne un motclé, pour visualiser lesphotos correspondantes, et que l'on passe en plein format sur l'une d'elle (touche Espace) lorsque l'on revient en vue avec vignettes la liste des motsclés se reposoitionne au début - il faut alors rechercher dans la liste le mot coché, pour le décocher - pénible ! Je suis sur Windows 10 64bits... Pour l'instant je vais revenir sur une ancienne version de Bridge, qui fonctionnait correctement********************************Hello,Bug, already reported - not corrected in version 13.02.6

In Thumbnail view + Gridlock, images in portrait orientation are not resized to fit into their grid space. Portrait images are taller than the image space of each grid rectangle. If text is present under each thumbnail, it overlays the bottom of the image.

Hello,just installed Bridge 2023. - Scroll + ctrl does not resize thumbnails.- "Additional Side Back button" of my mose does not send me back. Both "features" worked with 2022. Therefore I downgrade. Well done, Adobe. RegardsJakub

Dear all,I am getting crazy because I am not able to solve a ridiculous problem with Adobe Bridge: when I try to open it, it shows me an error message saying like (I am translating from Italian) "impossible to find the destination folder of the collection...probably it has been  renamed or canceled".The real problem is that it does not gives me any chance to look for this folder or to ignore this error (since I do not need that collection anymore) and I cannot use the software in any way. Furthermore the only way to close it is through the task manager. Please help me!

I updated my Mac Mini M1 to Ventura 13.2 and now Bridge cannot find my SD card any more - I tried with two readers that both worked flawlessly before the update, but now both trigger "device not detected" in Bridge

I've seen similar issue regarding the full screen preview and selections. I often preview one of a sequence of similar shots. I use the arrow key to scroll through. When I find the one that I want to edit, I hit the spacebar and then enter to open. Now, I noticed that it selects the first image I previewed and also the final image I previewed and opens them both in ACR. This happens on my Mac and Windows machines. I'm assuming it's either a bug or a default preference I can't find to turn off. Also, on the Mac, it changed "Move to Trash" to "Move to Bin"? 

We are happy to announce the release of Adobe Bridge Beta (13.0.3.686)   We have been tracking the issues reported on the latest release version of Bridge and have been working on fixing those issues.     With this Beta release, we're fixing many top customer-reported issues in the area of APD, File Operations, Label/Rating, Workflow Builder, Workspaces, Panels, Collections, and a few more. Also, please note that we have made a few significant changes in the preview rendering workflows.   Also, we are hearing your requests about reintroducing Multiple Bridge windows. This Beta release does not include this requested feature, but the Bridge team is working on it, analyzing the use cases, and constructing an appropriate action plan. Please stay tuned.   Please let us know if any fixes are not working well for you.   Steps to install/update   Install: Go to the Creative Cloud desktop app and select Beta apps in the left sidebar of the Apps pane

Assigning keywords to images is a tedious task. I back up the images regularly so I'm not worried about losing them.How can I make a backup of the keywords associated with each image so that I don't have to do this job again in the case of restoring my computer?Thanks in advance.

Adquiri um plano adobe de fotografia, que inclui Photoshop e Lightroom.Efectuei a instalação mas nenhumas das aplicações responde quando as tento abrir (incluindo o Bridge).O que posso fazer para solucionar este problema?Obrigado

Is there an option to make it so when I close a tab it stays closed? I'm sorting thru images using (windows) explorer, so when i spot a duplicate i right click and open the folder in bridge, but after a while I get the Maximum Tabs open warning box.  I keep right clicking and closing all other tabs, but the next time i right click and open in bridge all of the tabs that I previously closed are open again. I have tried looking thru the preferences menu but haven't found anything that sounds like it would fix this. Thanks,Melissa  

I have just noticed that I have three versions of Adobe Bridge installed ?  Do I require versions 11.1.4 and v.12..0.4 prior to v.13.0.2 or can I uninstall them?

When checking burst photos for proper eye focus and i want to skip through full resolution images in full screen preview in Bridge 13.02.6 it will load the first photo in a second or two then i skip to the next photo using the right or left arrow on the keyboard. The next photo will not load full resolution much of the time but sometimes it does. I have a fast computer that cost over $12,000.00 and it bench tests at insane speeds. i can view 12 bit RAW 8k in real time and i cant load a PICTURE?! its been like this for years on multiple computers ive used and im starting to loose it! why cant i preview my darn photos properly!

Can I tag peoples faces on a photo ? I am using Adobe Bridge. 

I am upgrading my Mac running OS 10.4.6 to a new Mac running Ventura.  My current Bridge subscrition is running v10.1.1.1666.  I assume when I log in to my Adobe account with the new Mac that I'll be updated to Bridge v13.xx.  I would like to keep the Collections I currently have in Bridge (move them) to the new version on the new Mac.  How can I do this?

Latest (2023), newly installed edition of Bridge partly recognizes and handles Canon CR2 files: it cannot import them form camera, nor can it handle them in 'Workflows'. However if the files are on the computer it recognizes them, and the Camera Raw module can also edit them. (CR2 format is supported by Bridge). Thank you for the help in solving the problem.

I am a novice user of Lightroom (v6.2) and have been syncing all of my photos (>85k) to the cloud using Adobe cloud storage. Someone suggested that using Bridge would allow me better workflow for deciding whether to edit files in Lightroom or Photoshop. But I am unable to figure out how to access my Lightroom cloud files from within Bridge. Is it possible? If not, should I just use Lightroom to organize my photos and just "Edit in Photoshop" when I want to do anything other than basic edits? Thanks!

For the longest time the Photo Downloader wouldn't recognize the XQD card as a removable memory card, therefore would not download files. And it seemed to recognize SD cards as two separate cards. Giving the choice between #1 and #2. Both choices downloaded the files, but choice #2 would delete the files as directed following the download, and the other choice would not delete. Now that that issue seems to be fixed, there appears to be another issue. An issue of recognizing and downloading all the files on the XQD or SD card. I'm noticing when I load the app, the file count is in error. I had 95 NEF files to download and it indicated, initiallly, there were only 17 files. Refreshing did nothing. In order to correct the count, I'm having to close and reload the app several times before it recognizes the proper number of files on the card. If I wasn't aware of the actual image count, it would have downloaded only the 17 files and the rest would have been overlooked and deleted. Well, tha

Hi EveryoneI'm experiencing severe issues with Bridge/Get Images from Camera.  This is using an iMax 27' with plenty of processing power/64Gb RAM.Here is what is occurring using Bridge and their “Get Images from camera” app.The Get Images sees the card reader/card but fails to recognise correctly the number of images.  It stops on 3 and waits to confirm copying.  One has to repeatedly force “Refresh” to get the accurate number – I mean 7 or 8 times or more.Once one gets the correct total, copying starts but is way too slow. I left the computer and came back 30 minutes later and it hadn’t finished copying the 2042 images.The whole process stopped and froze at 60% and then eventually returned to Bridge.I've worked through the isssue with Adobe but without any resolution.  Is it a problem related to ProGrade?Brian 

Boa tarde,Ao iniciar o Bridge, aparece-me esta mensagem:"Sorry, something went wrong.This is likely an issue at our end, but it could be that you’re not connected to the internet. Please check your internet connection and then try again later. If you’re still having issues, please see our troubleshooting guide."O que posso fazer?Obrigado

O Bridge esta a dar erro. abre a aplicação e em seguida aparece uma mensagem e faz o fecho da aplicação.   Como posso resolver?