Bridge

What does it mean when Bridge shows images from my photo library with green shading?

Hello. When I download and open a file in Bridge/ACR I'd like the Sharpening and Optics to always be applied as per the first screenshot. I have successfully created 2 presets (second screenshot) but can't seem to figure out how to always apply these 2 presets to all images; it's always one or the other, not both. Can someone please advise what I'm doing wrong here, which boxes I need to check and/or which procedure I should follow to always apply these two presets to all images? Thanks for any help!

moin und danke für eure unterstützung. seit einiger zeit startet mein adobe bridge nicht mehr. und dabei könnte ich das programm so oft so gut gebrauchen. leider kann ich die ursache überhaupt nicht nachvollziehen und verschiedenste kontaktversuche mit der adobe hotline haben mich kein stück weiter gebracht. vielleicht weiss hier jemand einen rat. das wäre toll. also, das problem ist ganz einfach zu beschreiben. nach dem klick auf's programm startet es, um dann nach einer weile wieder in sich zusammenzufallen und zu beenden. das dialogfeld zum schluss verkündet: "das objekt kann nicht angezeigt werden. möglicherweise wurde es verschoben oder umbenannt" nur - das wurde es nicht. es ist offensichtlich alles an seinem platz. oder was fehlt? besten dank für das interesse und viele grüsse aus hamburg

I just updated to version 10.1.1.166Prior to the update, things were going well, apart from the odd freeze.Main issues are :Extremely slow exports (about 10x slower than pre-update)Crashing every 15 minutes (unable to maintain work flow)Mid-2015 MacBook Pro2,5 GHz Quad-Core Intel Core i716 GB 1600 MHz DDR3AMD Radeon R9 M370X 2 GB

I have recently in last two weeks bought a new Mac and downloaded bridge, The operating system is SUR an update on Catalina. I cannot label my images these I have stored on an external hard drive.I am using bridge/photoshop 2021 and it dosnt matter from I can see if I used the labels menu or comand key and say for then hit 5 key.please helpThank you. 

Hello,I noticed in Bridge that for JPGs the colour profile is not respected in the preview (space bar) or overview.The difference is clear between PNG and JPG of the same file, both exported as sRGB. While the files appear the same on browsers, in Bridge the JPGs remain in Adobe RGB, they look duller than their version in PNG (sRGB).Is this something to fix?

After excrutiating CPU-killing lagging from Lightroom, I finally migrated to Bridge to do all my image processing. Lo and behold, everything went smoothly until ...... I updated Bridge 2020.Exporting now takes 10x longer. Don't even get me started on Bridge 2021.Adobe, get your act together!

For some reason I can't download and install version 11.0.1 verson of Bridge. My Adobe Creative Cloud Desktop says the update is "not compatible"   because my computer's Windows 10 version is not 1903 or later. But my computer has the latest version of windows. Plus, Photoshop, Lightroom and all my other Adobe creative cloud apps update just fine. Has anyone else had this problem? Any ideas?

I have a few thumbnails that, when opened in Camera Raw, are actually different pictures that appear within that working folder.  I've found about 5 of them in the same folder that do this.  I believe this is a recent event as I've never noticed this before.  Does anyone have any ideas? -Kurt

I download my images to Bridge, then open new folder which I name at the same time.  I can no longer rename the folder, just keeps the 'untitled folder 2' on it.  This happened in the last few weeks, some time after updating LRcc, PS etc. Please help - driven mad with the wasted time!!   Pandi Stepan   Moved from Using the Community (which is about the forums) to the correct forum... ModTo find a forum for your program please start at https://community.adobe.com/

I am trying to get the imgaes from my SD card, convert to DNG and save to my computer. I've done it a million times, but today I am getting the error message: Adobe Bridge cannnot obtain files from this device. Please ensure that the device is connected prooperly, or that the battery is charged, and try again. I tried a different card reader and different USB ports and still the same error. I even uninstalled Bridge and reinstalled it so it is the most up to date version. In the preview before I click "Get Media" I can see all of the images so I know it's reading my card.

Hello. In Bridge how can I view file name and label of an image file in filmstrip? Right now the file name and label is shown in the Preview pane, but the image thumbnails in the Content pane are blank, there's no info (except for folders which do have their name displayed). If it matters, the filmstrip is shown in vertical mode. Also, if I view all the thumbnails in Essentials, the file name and label are displayed. Thanks for any help!

I updated my Mac to Mojave & the latest Bridge update. Ever since then, when I plug my camera into the computer it recognizes the camera, but says "This device does not contain any supported media." If I hit refresh it appears like it's loading for a split second, then back to the same message. I tried on my old version of Bridge & even iPhoto & it does not recognize my camera's images. (I am trying to import jpegs, so RAW images would not be the issue)

In the past month Adobe has finally gotten clever enough to lock me out of using Bridge Version 8 from 2018, which without question had the best GUI interface of any. It would no longer allow me to invoke Camera Raw (well played Adobe). As a former GUI designer who is now forced to use the present versions of Bridge, I'm going to fully present the troublesome issues in clear detail in support of the many many users who have been asking for the same thing the past two years.The IssuesScreen Usage Efficiency - There is simply too much padding and wasted space around all of the content. As designers, we have thousands of folders and files to navigate. We need to see LOTS of information at a time on our huge 4K monitors with minimal scrolling.The Black Background on Thumbnails - You have seen many complaints about this, yet it is still here. Do these have a function? Would removing them cause problems we are not aware of? They take up space that could be used for a larger thumbnail. I also

Hi,In the last few cersions of Bridge - I have the latest on my Mac, Photodownloader open as it should and downloads images from my sd card (on desktop)to eventually open images in Bridge. All as expected.Here's the but: I tool 30 RAW images on my SD card and here is what happened.Time for downloader to copy from SD card on desktop to new folder on desktop abpout 30 seconds.Time to just drag and drop from SD on desktop  to folder on desktop about 10 seconds.Time for "Import from Device" from SD card on desktop to new folder on desktop 10 seconds.SD card read by reader and appears on desktop every time.RAW files averaged 30meg each. Any thoughts - memory says this used not to be the case. Thank you, Steve1812

1st shots downloaded.  In File manager I can see thumbnails, but not in CC, just icons.  Too new, so IU have to update.  Try to and get spinning circle, won't update.  Go to Adobe.com and it's saying Photoshop subscription is $20/month.  Did they double their price?  Will that apply, or the $40/month for an ap when I went there just before?  Why can FM have thumbs and not Bridge?  Outrageous. Try again, spinning circle.  every update ruins things further, totally upsetting once smooth workflow.

No offence to the creators and those in management .....etc but it is about time that accessing content libraries in adobe bridge over all other adobe app's should not be an issue , as just a simple amatuer even i see how it makes ADOBE look , not very good and a bit backward ,  not having the technology in place to allow full access to adobe bridge libraries , hopefully this issue is quickly rectified before the competition enables such access in thier systems and starts an avalanche of customers leaving ADOBE to go to the competition who are listening and taking notice of what the subscriptiooon paying $$$$$$$$$$$$ customers are requesting

I am unable to uninstall an older version that is slushing behind in my application list. The only way a might be able to uninstall it is to reinstall the exact same version and then uninstall that one. (It worked for other adobe applications) This older version (it has to be v10.0 )doesn't seem to be available any more.Does someone know how I might be rid of this problem? OS: Windows 10Have the complete CC suite.PS. I have tried all the regular proceedings before posting this question. DS

Hi All Is there a simple metadata re-edit process when one field in the Bridge Metadata Template changes and there are thousands of images to update in a photo library...with the images sitting in an organised single folder but within many multiple subfolders...without the need to open each subfolder to apply the new template changes directly to the images in the subfolder? Say, the IPTC metadata includes an address, email or phone details and one of these changes... Any help appreciated. Many thanksChristoChristo Aitken

I use Adobe Bridge on 2 MacBook Pro's. On my old MBP, OS Catalina, it works fine. On my new one, MBP M1, OS Big Sur, Bridge will not look into my Documents and Download folders. It works on other folders, and it works with Documents on my external backup drive. I have installed the newest version of Bridge and it still doesn't work. Any suggestions are appreciated.   

If I open a JPEG from Bridge in ACR, make some changes then click the Done button to exit ACR the changes I made are visible in Bridge. However, if I view the JPEG file in Windows Explorer the changes are not there. There is no XMP file for the JPEG so where are the changes saved? Does bridge have a catalog that contains the changes like LR or are the changes written into the JPEG in a format that is ignored by other image viewing software? Thanks. By the way, I know that I can  force the changes to disk by clicking the Save Image button in ACR instead of clicking Done but this is messy because there is no way to overwrite the existing JPEG file. Every change generates a new file.

I found plenty of articles explaining how to turn ON color sycning, but no information on how to turn it off. Every time export a PDF from a book file in InDesign, I get an error message about color profiles. I'd like to simply turn off the color syncing. Any ideas how?  

Hallo,Man öffnet den Internet Explorer, dann auf den Ordner mit den Bildern auf der NAS mit rechter Maustaste, auf "In Adobe Bridge 2021 durchsuchen" klicken. Und nun werden die Bilder in der Bridge angezeigt. Es ist kein MAC.LG Leo

The new update now makes the app icon smaller than the other CC icons.

If I go into ACR from Bridge and flip an image vertically (or possibly rotate through 180deg) the resulting image shows correctly in Bridge, but when I do a slideshow (ctrl L) it shows as unflipped. I attach an example