Bridge

Hi!Is there any options to turn off generating previews? I need usually just thumbnails.Abobe should build in a switch, to turn off generating previews. Is there any chance of this?

Bridge CC 2019 lässt in den META-Daten bei der E-Mail-Adresse die Eingabe des Zeichens "@" nicht zu?

Does implementing centralized cache management on a local network share (I mean local as on storage in the same building) mean that two users can have Bridge installed and see the same document information?? From what I have read -- this is indeed a basic and supported method for the age-old question of 'using Bridge on a network.'Could someone(s) experienced please comment??Thank you!!

This used to be one of the only real advantages to using Bridge over finder, but now, almost every day Bridge just doesn't find the items in the subfolders, even if the items should be stored in cache from yesterday. Even if I do clear my cache the next day the problem returns, this, combined with the fact Bridge doest preview .SVG files is making Bridge more and more redundant by the day, please fix this your software if its not too much to ask!

I opened up Bridge CC 2019 for the first time to color correct images and tried cropping and white balancing. The tools strictly zoom the image into 100% instead of doing what they should. What am I doing wrong?Thanks!

I have a folder on Dropbox with 2 PSD templates in it.I click on the mater folder folder containing my templates folders. I find the sub-folder I want to duplicate and highlight it. I type ⌘D. Nothing happens.I can, however, right-click the sub-folder I want to duplicate and select "Copy"from the flyout menu. I then go and highlight the master folder. I type ⌘V and a copy of the sub-folder appears in the master folder.I used to be able to just type ⌘D and the folder I wanted was duplicated. This is no longer functional.The ⌘D command does still work on individual images.

"There is no disk in the drive please insert a disk into drive \Device\Harddisk4\DR4"Since upgrading to Photoshop CC2019, when starting Bridge, I get the above message popping up. Normally it starts with DR3 and on pressing cancel it runs rhough to DR6 all with the same prefix excepting for the drive number. This occurs everytime I start Bridge.This has never happend befoe in all the years I have used Photshop/Bridge (V2.5.1 was my starting point through every variation until CC2019)Has anybody experienced this problem and is it a bug in the upgrade. Icannot even track down which drives it could be refering to. I have searched "Disk Management" for a clue, but all seems well there. I'm running Win 7 64bit with three HDD C = 250Gb, E =2Tb & F = 2Tb Everything is up to date.Ken

Hi all,I'm a fairly inexperienced user of the Adobe CC programs. I just updated to Bridge 2019. I'm working on a project involving tagging thousands of photos of various formats with keywords, and I was about halfway through when this update occurred.After opening Bridge 2019 and futzing around with the UI layout, I tried to get back to work but all the keywords are missing from tif files. I can't add new keywords to them either. And when I go back to Bridge 2018, I see a few keywords I put in up to yesterday, but most have vanished. Trying to add a new keyword to a tif file results in the following error message: "The file "filename.tif" cannot store XMP metadata. No changes will occur."Because I'm pretty inexperienced with these programs, I'm not sure if there's something obvious that I'm missing. I slightly panicked that 6 months of work might be down the tubes if I can't get these keywords back.Any advice would be appreciated.

Hi,I'm having this issue where certain location folders (external drive, network drives) are locked on my Bridge. I can still get to them using finder but I can't view them on Bridge. When I right click the file it gives me the option to unlock the drives but it doesn't actually unlock them...I thought that maybe the permissions on my network drive changed, but the fact that my personal external won't let me in make me a little suspicious

My bridge 2019  has started to fail to launch. All I get is "operation could not be completed"Reinstalled several times but get the same result.Can use 2018 okay. Any one having the same problem?It had been working fine till yesterday when this issue started.

Hi, hope someone can help.Recently, this 'pick up...' dialogue box has started to pop up each time I close an image when using Bridge CC. I would like it to go once and for all rather than having to close it each time I open up a new image. Thanks in advance for your help.

I viewed my images in Bridge. While doing so, I dragged my favorites over to the favorites panel. Is there a way to open all of the favorites in Photoshop at once instead of having to click on each individual file?

Hi updated my Photoshop CC and Bridge CC last night from the 2015 to the 2017 version.  Now I can't open any of my files.  I get a pop up that says "Could not complete your request because photoshop does not recognize this type of file."  I worked on pictures all day yesterday and now nothing will open.  Any suggestions?

I have looked under every tab and cannot seem to find the image processor to export a bunch of images from raw to jpg. Granted, I just started using Bridge a couple weeks ago, so I wasn't super familiar with it to begin with. But I can't find this feature, and it is an important feature for me, I don't want to have to open several hundred photos in Photoshop just to turn them into jpgs. Please help. Thank yoU!

Hello,I don't see any of my collections since i have upgraded to new version of Bridge. Any help please?I had about 15 of them.thank youOndrej

Very annoyingly this morning I have had Bridge 2019 imposed on me. I now have unusably soft thumbnails a ruined morning and a box that repeatedly pops up saying - adobe pick up where you left off, or start fresh windows - I desperately need to switch this crap off before I hit the screen! HELP 

How do I get rid of the darker grey boxes around every image? Its just horrid. I want less extraneous visuals not more.

Hoping someone can help.  I have searched high and low to no avail.I am wondering how to change the default PLACE IN command on the contextual menu in Bridge. At some point I did place something into After Effects and that somehow became the default selection.  However I rarely use this to place into After Effects.  Much more often I am placing hundreds of items into indesign or into Photoshop depending on the task at hand and it would save a considerable amount of time if I could set the default program at the bottom of the "left click" contextual menu to Indesign.Anyone got an idea on this?All updated versions (CC2019)Please and thanks!

My photos should be renamed to AJCL - 20181004-0003.cr2 etc. This happend:  . AdobeBridgeBatchRenameTemp1AJCL - 20181004-0003 .  AdobeBridgeBatchRenameTemp2AJCL - 20181004-0004 AdobeBridgeBatchRenameTemp3AJCL - 20181004-0005. The xmp files were mixed e.g. I see in bridge a picture of a seagull and when i go to the raw converter it shows there a picture of a boat. (and that should be correct. But when I go back to bridge it still shows a seagull in stead of a boat. It is all mixed up. Total disaster. Is there a solution or should I go back to bridge 2018 and wait for an update?

Good evening hive mind.  I recently updated to Bridge 9.0.0.204 and I am noticing that my keywords are missing.  I created a few for the pictures I downloaded after the upgrade, and they are all that appear when I open Bridge (see below).  I can click on older photos and once I do the keywords populate from that photo, but I don't see "ALL" of my keywords in the menu. I'm not incredibly fluent in this version of Bridge and I am concerned that all of my keywords are no longer there to choose from.  Can anyone help? I'd love all the keywords to be in the menu so that I can easily choose from the keywords I have created.  I'm pretty worried about this.  I'd love some advice.

When I search for a name associated with the file's description the new version of Bridge returns no results.That is very inconvenient. Indeed, if that is the case (I could be doing something wrong) it presents a huge issue.If I can't search for words that are not attached as keywords it is very inefficient and ineffective.The previous version did.What's the issue? It seems you can search everything else in metadata but description.Brian

Bridge don't show XD file in the Preview panel. Solution?

I have many thousands of TIFF files saved (uncompressed), and I am needing a way to batch save them with ZIP compression.  In Bridge, it appears that my only option is LZW compression, but I am not very familiar with the program so I may be missing something.  Is there a way to do this in Bridge?

Hello,I have been using Custom XMP Panels for Adobe Photoshop and Bridge.  Migrating panels to current versions of Photoshop have not been an issue but Bridge is a bit more complicated.Currently trying to test the panels with Adobe Bridge CC 9 but I don't know where they are stored.  In Bridge 2018, they were stored in the Contents folder within the application.  Not sure where to store them now.Any help would be much appreciated.Morgan

I just logged in to Adobe Forums then I clicked the link to "report a bug"   . . . I have to log in again ??