Bridge

Hi, the three shot were taken the same day, the third a few hours late, showing "today" instead of date, funny. Also i would like to enlarge the thumbnailsa bit more, mac command+ gives about 2 inches most, thanks

Bridge is opening files when I try to only select that thumbnail, IE: I cannot highlight a file without it opening.Also: is there a way to set thumbnails to "double Click to open"?Thanks

Бридж перестал открывать камера ров.

Hey,Bridge takes forever - like 20-30 seconds an image - to do something as simple as changing a label or a rating.  When I'm keywording, I can only enter info for two images before I have to wait for the first to finish updating - another 5-15 seconds.Any ideas what's hanging things up here?  It's ridiculous.

original photos downloaded from Canon card.photos separated into folders.one folder's contents were "cleaned up" in Bridge and the folder was renamed.renamed folder with "cleaned up" images is accurate in Bridgerenamed folder still shows only the original photos and not the versions that were "cleaned up" when moving the folder.impossible to transfer folder with revised images.seems like the revised images want to be saved but that not available in "file"Any ideas?

MacPro 5.1, 64GB ram, OS 10.10.6, Adobe CC, nVIDIA GeForce GT120 512MBI’m seeing some rendering problems on the thumbnails and full screen views when in Bridge with raw files that have been adjusted. Images look like they often do just before a render is completed, blotches and strange color in areas.I’ve tried purging the cache, turning off and on Software Rendering in Preferences. When the raw file moves to ACR or to Photoshop the problem goes away but the Bridge rendering still remains strange.Help appreciated, samples below.Bridge Rendering (problem in shadows on lower left)ACR Rendering (problem not showing)

We recently installed Bridge Creative Cloud. The loupe tool does not appear anywhere. I have read the tutorials on usage and multiple forum posts, but none address what to do when the loupe tool is missing completely. It never shows up in the Preview panel and does not show up in Preview mode.I just need to enable the loupe tool, but would prefer not to re-install since I have multiple customizations I don't want to lose. (Previously, with Cs5 Premium I was a heavy user of the loupe and really miss the capabilities it provides.)

I recently purchased a Sigma 18-35, but am disappointed to find that there doesn't seem to be a lens profile in Camera Raw 6.7. Is there a way I can install the profile for this lens?

I have a large drive of photos that are tagged in Bridge. Is there a way to export the tags and import them into Bridge on another machine?

The files are png's created in CS6. When I open them in CC 2017 the files are copyrighted and have the correct info in file info, but in CS6 it all disappears.Can I be sure this information will be shared with third parties?

Just downloaded Photoshop CS6 Extended and then its updates.  Photoshop opens OK, but Bridge indicates it is attempting to start - appears in Task Manager for 2 or 3 seconds as a background task and then disappears. I have attempted to run as Administrator and also tried to open it via Windows Compatibility option where it tells me that Bridge is not compatible with my PC's operating system.My PC:Windows 10 pro, 32 bit versionProcessor:    Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, 3601 Mhz, 4 Core(s), 4 Logical Processor(s)The processor provides graphics capability, there is no graphics card installed, but Photoshop CS2 worked fine when it was installed on this PC.Please help.

Since the last Camera Raw update - RGB preview thumbnails in Bridge have converted in appearance to CYMK - worse when the files are opened in Illustrator or InDesign or Photoshop - the colorspace of the files have changed. Even though the value for the color still says RGB and the colorspace for the file is still RGB - upon export the file has converted to CYMK. I have been on the phone with Adobe - they can't figure it... any ideas???

Has been a while since I have done this. Would like to search metadata of a collection of images for all images containing (or not containing) a set of one or more terms.If one or more of you would please show me the workflow to get this going, I would be grateful.Best,jwc

When I try to load a TIFF file and select " Open in Camera Raw" I get this message, " Camera Raw Editing is not enable, camera raw editing requires that a qualify product has been launched at least once to enable this feature" Any ideas on how to fix this problem...Thanks!!

It's not reading basic data that the Finder reads.  Dimensions, codecs etc.  Can anything be done to correct this?  THank you.If it matters, I'm on a Mac.   

I need to change the format of the date of the files in adobe bridge, as it is rather confusing for me   as I am seeing it ( month/ day/ year). I want to see: day/ month/ year. Do you know how to change that?Thank you

At last after more than one years waiting the Photo Downloader is now back working on Mac! Both my cameras (Canon 1D Mark IV and 5D Mark III) are working with Downloader using the new Bridge CC2017. One problem though. Connected with usb-cable the images on the memory cards are not deleted when this option chosen. Both cameras with these problems. No error messages. Just a message that the images have been deleted, but still on the memory card!

I am using CS PS6, with Win 7 Pro, 250Gig SSD and 16Gig RAM, 4 Gig VRAM. Just lately, with no changes to the system, no new programs installed, Bridge has started freezing. For instance it will open at the last folder used, that's normal, but if I try to back up to the parent folder, from User > Photos > May 16 to User > Photos nothing happens. After about 30 seconds the screen turns milky white, and "Not Responding" pops up. Nothing works, can't even shut it down. After about a minute it comes back to life and I get to User > Photos. Now if I try to open User > Photos > Jun 16 Bridge freezes again. And the cycle repeats. When I eventually get to select an image to open it in Camera Raw right-clicking does nothing, and maybe 2 minutes later the menu pops up.Any suggestions much appreciated,David

Hello,I am new on this forum. I have the following problem. I have an iphone 6s and take pictures with gps. When I export my photo's to Adobe bridge cc there is no gps information available in bridge. No place for example where I made the picture.Is it possible to export this info from my iphone 6s to bridge cc?Thank you for your information.

I am using PS6 CS with Win 7 Pro, 250Gig SSD. Photoshop is running fine. But just lately, with no new installations or changes to the system, Bridge does not respond to any command.For instance when I start Bridge it opens looking at the folder that was used last. If I try to go from User > Photos > Jan 17 back to Photos to open another folder nothing happens. After about 15 - 20 seconds the screen turns a milky white and "Not Responding" pops up, and it really does not respond, cannot even close the program. However, if I do nothing after about a further 30 to 60 seconds the program responds. So now I'm looking at User > Photos >. Now if I try to open Jun 17 it freezes, again, and a minute or so later I'll get there. But it'll freeze again when I try to open an image in Camera Raw. To put it politely this is a pain.How can I fix this?Thanks for any input.David

I have an FTP account set up under my main website. We upload web galleries created with the HTML gallery template to our FTP space and they work fine on any given computer browser (Safari/chrome/etc.) but will not show up on a mobile device. It only displays a blank screen with "Not Found" at the top. Since we're uploading the galleries with the HTML format, I imagine it isn't an issue with Flash/security settings. Any idea what could be causing the issue?

I just downloaded the newest version of Bridge and now i cannot copy or move files from desktop to backup hard drives or move files between portable hard drives. I cannot create a new folder on my backup hard drives.

I used to download my photos with Lightroom.  Lightroom would create a new folder for the date the images were taken and label it with the following format:  2017-06-23.  However, Bridge would label the folder as 20170623.  This format, in my humble opinion is harder to read.  Is there any way to get Bridge to use the format with the dashes in the date?Cheers.David.

HelloI did a clean install of Sierra yesterday on my 13" retina Macbook Pro 2013 and reinstalled CS6 Photoshop and Bridge. The text in menus, file names etc in Bridge is very pixelated. I'm quite sure that this was not the case under El Capitan. There are no updates to be installed. The display is scaled (as was the case under El Cap) to 1440x800. Is this due to Sierra somehow? Thank you in advancePhilip

Hi!My Bridge CC 2017 will not open when I click on it; I've tried re-installing it a million times and I still get this message:Not sure what to do now. Also cannot find a way to get in contact with support. Adobe is making this very difficult.