Bug Reports

I'm having some recording issues with recording audio tracks in Audition while using either the multitracl mode or the single waveform track mode. For context, I am using a Yeti snowball mic with A Mac M1 Chip notebook laptop. See below audio for example.

To reproduce:Open "Delete Silence" tool and select some sane thresholdsSelect ~60 min or longer of audio and click "Scan"Detected silence segments include long sections of audio, as if the thresholds were invisibly changed. The number of segments detected is also much smaller than it should be.If you reduce the audio selection slowly (e.g. from 60min to 50min, then 40min, 30min, etc.) and scan at every duration, at some point, it will start working correctly again. Number of segments detected goes from something like 26 to 498 when I shorten the duration from 34min to 33min. This makes no sense, because it longer duration must have more segments.From the behavior, it seems like when more than 500 segments of silence are present, it gives the wrong result.

I'm working on a project that requires me to record a lot of voice over. I have about 2 and half-ish hours of audio recorded for this, and now for some reason Audition won't let me save or export it. The options are greyed out, and it won't allow me to save using Command + S either. I'm wondering if it's an issue of how big the project file is, or some type of other error.  

I can see my "tool" while recording on the screen.But you can’t actually see it. “tool” seems to be placed on the bottom layer.what should i do?  

I've been having this issue on and off on various audio projects. When saving a session, Audition prompts me to copy audio files into the session folder. I like having this prompt, as it reassures me that I will be working with copies that remain available when I switch to another workstation.  But sometimes after a while into a session, the prompt keeps popping up when saving, even though I have not added any files since the last save. When I click Yes nothing really seems to happen, and when I save the session again, the prompt reappears with the same results. Recently I have been able to pinpoint a possible issue that leads to this. I discovered that I was using two different audio files with the same filename (ZOOM006_LR.wav). I just happened to have two recordings from different folders that I both needed in my session. As the first recording was already copied to Imported Files, Audition was probably unable to save the second file? After closing and reopening the s

Hey, has anyone experienced this?...I recently recorded an audiobook and as I was going through the final pass of edits, I kept finding random tracks with weird artifacts from totally different multitrack recording sessions, for totally different projects, spliced inside the tracks. I had to go back and re-record multiple tracks, only to find that new artifact splices would pop up somewhere else.  It feels a bit like playing whack-mole...Any advice? Bug fixes? Thoughts on what this could be?Thanks!

I get 0x80070780 error when tyring to open M4a files.  Used to be able to do it a few weeks ago?

THe native flac handling has gotten much better, but for the last few versions I've noticed if i take a flac file and alter it (usually just downsampling from 24/96 to 16/44.1 - the embedded metadata gets replaced by some lingering old metadata i did well almost 2 years ago (song name, artist, year, etc... ) How do I reset or delete this? Where's it stored and why is it not keeping the original metadata in the first place? Thanks.

Lately, possibly since updating, pressing CMD+S doesn't actually save in Adobe Audition. There's the little save animation plays in the Files list, but the asterisk remains, and if I try to close the file, Audition asks me to save the changes. This is happening in both Waveform and Multitrack views.   Adobe Audition ver. 24.2.0.83 macOS 13.5.2

I am doing whole band mixes in Audition. I'm finding that the two VST3 effects I commonly use (Phil Speiser's The Strip and Melodyne) are working fine while mixing but are not being applied when my multitrack mixes are being exported as mixdowns. I'm resorting to playing the Audition timeline while real-time recording it into OBS in order to have the intended final mix. I have not seen this same issue being reported elsewhere. I'm including my system specs. Thanks.Dell XPS 8960Windows 11Audition 24.2.0.8313th Gen Intel Core i9-13000, 2000 Mhz, 24 Cores64 gigs RAMRealTek Audio

Adobe Audition has been freezing every few seconds for over 3 weeks (Adobe Audition Not Responding message for 5-15 minutes).  I am making a podcast and I'm on a deadline. It hasn't happened previously and was working fine until one day it didn't. I have no clue why it started, this is a relatively uncomplicated file with 4 tracks. I have searched Community Forum and followed EVERY piece of advice others have tried, nothing has worked. I have spent an entire day with a technician cleaning and updating everything on my Windows PC, including installing extra RAM (I am now using 32MG). NOTHING has worked. I have cleaned and deleted files from media cache (including all CFA & PEK files); changed locations for temp files (Primary & Secondary) to fastest SSD hard-drives; changed backup locations and auto backups. A lot of users seem to have experienced this problem without any real fix, solutions or reasons offered from Adobe. The problem is with Adobe Audition ONLY, e

When I try to record in Audition in a Multitrack session with 3 microphones, only mic 1 is recording, but sends signal to all 3 tracks!  I am using a Studiolive AR8c as interface for the mics.I have selected Studiolive AR8c in Audio Hardware settings , I have selected input for each track, mono mic 1, 2 and 3. I have armed the tracks.I am working on a Macbook pro with 14.3.1. and Audition 2024 When I tested everything on my older Macbook pro it worked, so maybe it is a software problem? I would be very greatfull if anyone could help! Here is a screenshot :    

After two years this happen again.... I've tried to set the correct audio hardware, turn of and restart the computer but nothing work.I still hit the button "play" or the space bar but the cursor is stuck and there is no sound. Does anybody can help me?

When I try to record audio when no Nvidia GPU consuming apps, it stutters and doesn't record anything. While a game is running in the background, it seems to record fine but when I close it, it just messes up again. Version: 24.2OS: Windows 11Processor: Intel i9-13980HXGPU: Nvidia RTX4080 

Since one of the more recent updates, all previous audio and new audio files add .006 seconds to each one when I open them. This has never been an issue as I can create an extact :30 and it usually stays that way. Now, everything is :30.066.  How can this be fixed/stopped? 

Version of the app: Adobe Audition Build 24.2.0.83Platform and OS version: Mac, Sonoma 14.3.1Basic steps to reproduce the problem: All I did was cut and pasta part of the wav from one spot to another. But when I paste it the spectral display area information is gone. This just started happening tonight. I have been working perfectly ok all day until this evening. I thought ok well let me just undo what I last did so that I can get the data back (which I did) and save it. But when I tried to close the program, it suddenly stopped and got stuck. I decided to save my work as a version 2 in hopes that I can figure out what was up. But the original edited file and the copy version 2 no longer have the spectral data under the waveform.Expected result and actual result: Be able to edit the wave file - move part of a file around with the waveform and spectral display in tact.Below I two screenshots below: the original raw version and the version I was editing. I really hope that I haven't

Hey there, hope this is the best place to post this as I couldnt find a place specifically for it (and I pay $10 a month for the service so kinda expected there to be an active area to report issues) :SUsing ... https://podcast.adobe.com/enhanceWhich Ive been doing for over a year I upload a 320kbps MP3 and after enhancing instead of allowing me to download a high quality .WAV it instead sends me a 64kbps MP3 which kind of defeats the purpose of enhancing the audio. Has anyone else had this issue or knows how to remedy it? I cant see an option to select a download format and as mentioned its always been .WAV for me in the past.ThanksRikki

When exporting a multitrack session, there is an option to trim the source files to only segments used in the edit. However, the source files aren't trimmed — the soure file is copied in its entirety into the archived session. Although a workaround would be to select all clips and convert them all into unique copies, that defeats the purpose of the export function, and the clips are not editable if they are all converted into unique copies.

Audition 24.*.*windows 64 bit. Every time i click on of off a file it loads a new set of markers for the project. one for the timeline then ones for the file selected.This is, I believe causeing some issues, and after some time the software starts to lock up, show fonts weirdly and not even print the menu text on screen. Until it locks up fully and crashes. ( iusually save and quit now before this happens - every 15-40 minutes)Can we get a toggle to turn of file markers and only display timeline ones. Please?I do not need markers on indvdual files. It's really effecting my workflow.  

I have been working on a project for some time, using an external hard drive to manage space on my Mac. I stepped out and returned when there was a power outage. Upon reopening the application, I encountered the error message, "Warnings or errors were encountered when opening the following file." The detailed tab below indicated "file format not supported."Since then, I have attempted to open the backup files, but they all result in the same error.

I am having this issue in Audition where when I start a new waveform recording, it lags and doesnt record any audio. I will record for 10 seconds and when I stop recording, it is now only 1 second long and no audio has been recorded. I have researched for the past hour and found nobody who has had this issue. I know its not my computer because I can have multiple Adobe programs running at the same time with no lag. Its only in audition. I need to get this fixed ASAP and any help will be much appreciated! Thank You!

After installing Adobe Audition on my Win11 system, I am unable to record audio properly. When I press the R key, the green audio bar jumps slowly. Once I start recording, the cursor doesn't move smoothly but jumps instead. There is also almost no waveform in the red progress bar, it's almost blank. I tried to record the screen using a screen recording software, and I found that once Audition starts recording, my screen recording software also can't record any sound. However, when I stop recording in Audition, my screen recording software can then record sound again. I'm sure that my system audio settings are correct. My computer is a ROG ZEPHYRUS 16 2024 with WIN11, it's a brand new factory system with high configuration. AU is the best software I've ever used and it's very important for my work. I need help to solve this problem. I've tried multiple versions of AU, but the problem persists in every version. Additional information: I've tried the following troubleshooting steps: Ch

I am unable to use Export > File to export an MP3 from waveform view after exporting a Multitrack session (Multitrack > Mixdown Session to New File > Entire Session).- Issue was occurring on 24.0.3 so I uninstalled Audition and installed the previous version (23.6.2.4), but that did not solve the issue.- I can export WAV files with the same destination but not MP3s from an unsaved Multitrack Export. Workaround was to export WAVs then import the exported file into the Batch Process Window, but even that fails now.- Issue occurs when using iZotope's Ozone or Neutron (one of them, not sure which specific VST plug-in) in the Effects Rack in Multitrack, whether for track or clip. Bypassing effect or disabling effects does not prevent the problem, need to remove the effect completely in order to avoid this issue. Once the rack is cleared the issue no longer persists. There is also no problem with using iZotope RX10 plug-ins. I have seen a few reports of this, so its not an isol

Settings for the Center Channel Extractor effect are not saved when you save you project.  Re-opening the project shows that affect has reset to defaults.  My work around is to save a preset with my settings and each time I open my project I need to remember to re-apply my preset.  I was fine with this workaround until I now have need to use Center Channel Extractor on 10 Tracks.  So, how I have 10 presets for that effect and every time I open my project I have to go through and set my presets for that effect for the 10 Tracks.

Hey Guys n Galsi been having this problem where " Error 1 creating file. The destination may be full or no longer available " pop up after my sessions on Audition. I was wondering what the issue could be? or how i can go about solving it, any help would be grateful, thanks