Bug Reports

After publishing a sequence Premiere enters into the Resolve Conflicts which then goes into hundreds of sluggish Update Items mode (showing more than 300 items).Since it takes so much long time, I always end up cancelling the items updates to be able to go back to work which is what should be causing the sync issues.Is there any workaround this issue (without having to cope with hours of items updates?)

I’d like to share feedback regarding a functionality change in Premiere Pro 2025 that has significantly impacted my workflow.In the current version, I noticed that when I copy the volume level of an audio clip (e.g., -11dB) using the right-click menu on the volume effect and selecting "Copy," and then paste it with Ctrl+V onto other clips, the program now creates a new volume effect instead of simply adjusting the volume of the target clip. This results in compounded volume levels, as shown in the example below:  The target clip’s original volume is set to -5dB.I copy the -11dB volume from another clip.When I paste it, Premiere adds a new -11dB effect to the clip, resulting in a combined volume of -16dB. In previous versions (up until 2024), pasting the volume level onto other clips replaced the existing volume value with the copied one, which was more intuitive and efficient. With this change, I now have to adjust the volume manually for each clip, which significantly s

My PC:  OS: Windows 11 BusinessVersion: 24H2Installed on ‎2024/‎12/‎13OS build 26100.6725Experience Windows Feature Experience Pack 1000.26100.253.0The APP: Adobe Premiere Pro 25.5Silences aren't being detected as expectedAfter transcribing the audio, I set the filter to 0.25 seconds to show pauses.I find a lot of pauses on the timeline for that clip of audio, and I do this per track on the timeline to keep the timing. I mute and lock all the other tracks.Then, when I decide to delete all the pauses at once by lifting, there are large sections of pauses still in place.The expectation is that when clicking delete all, it selects all the pauses and deletes all the pauses.When I did this, it only partially deleted all of the pauses on that track. Now it doesn't even detect the pauses that it didn't delete.How is this acceptable?As seen on the timeline

Premiere is crashing whenever i try to close the app, it doesn't matter the project i have open, big or small it always gets stuck and i have to force quit it everytime.even trying to avoid the problem by closing the project first then the app, it still gets stuck.im on a macbook pro 16-inch, Nov 2024 , M4 Pro, 24gb ram , sequoia 15.6.1, i was one 25.5 when i faced the problem, then tried downgrading to 25.4.1 to no avail.i reset media cache, app preferences, restarted my mac, nothing solved it.i'd attach the dmp file from my recent crash for more info, but it isn't supported.

Hello!When working on the latest version of Premiere Pro I have massive performance problems. Hardware accelleration is activated in the preference as well as in the export window but editing or exporting is practically impossible becuase it is terribly slow.I am on a Mac Studio M1.Thanks,Bernhard

Premiere Pro Preference setting files corrupting quickly I'm finding myself having to delete & reset my preferences multiple times a day because various functions stop working at random (such as the marker and text windows stop showing their respective contents; other function buttons such as go to next edit point stop working etc), resetting my system preferences resolves these issues, but I'm resetting my preference up to five times a day. The main project that I'm editing is a productions project, with edits in one project, and source clips as multicams in other projects (source media is separated by day). I've only been working in this productions project for a couple of weeks, so it's fairly new.Any suggestions on why my preferences appear to keep corrupting, and ways to avoid this corruption?Tech specs MacBook Pro (16-inch, 2021)Apple M1 Max64gb ramMac OSX 15.7.1Premiere Pro 25.5.1

Hey, I recently switched from DaVinci Resolve to Premiere Pro. At first, when I edited and exported videos, it only took around 5–10 minutes. But after a few days, exporting the same type of videos now takes 40–60 minutes. There are no heavy effects — just text and simple graphics. I also use After Effects quite often, and even with heavy effects or 3D edits, exports take much less time. Please help me fix this issue.

 Hi everyone, I’mhaving a strange and frustrating issue with Premiere Pro 25.5.I shoot on a Sony A7 IV in 4K 50 fps, and I’m editing in a 25 fps sequence to create 50% slow motion.Everything should be smooth — and the exported footage looks perfect — but the preview playback is extremely choppy.  My system:CPU: Ryzen 7 5700XGPU: RTX 4070 (with CUDA enabled)RAM: 32 GBSSD: 1 TB NVMeOS: Windows 11Playback resolution: ¼My workflow:Original clips: 4K 50 fps (H.264 10-bit)Proxies: ProRes Proxy 960×540, container QuickTime, “Match Source (frame rate)”Sequence: 25 fpsNo effects, no LUTs, no titles — just the raw proxy clip slowed to 50 % The issue: Playback is choppy only in the preview window, even at ¼ resolution.As soon as I render the selection, playback becomes perfectly smooth.Exported video is smooth as well.If I disable proxies, playback is also smooth (but i cant work without proxy because my pc will lag)  What I’ve already tried:Re-created the

I own a M1 Max 4TO 64gb Ram...a beast! After the latest update of PR 25.5 the software is totally not working properly. I've been using it since 2007! And I always defended the software as being very stable, and i've worked with many heavy plugins in the past and present. Simple bug is the playback in Full resolution, timeline 4k with Sony s-log 4.2.0 rushes and the timeline is loosing a big amount of frames very impressive, even if i remove the high resolution preview and lower it to 1/2 it till have hard time sometimes. I even did not apply any color correction, nothing at all! Many other issues, where it freezes for no reason, and without having a heavy work to really heating my laptop, the older version was perfect...waiting the new update hopefuly to have it fixed! My colleague do not have this issue so i guess it's unlikely to me. 

I love the remix tool, however it often happens that whenever I open the file back up the program does not apply the same remixing properties to the chopped audio. I almost never get the mix I want immediately, so I mostly chop the pieces I need from the remix and then move them around. Problem is that when I open the PR file again they are offline or unlinked. See image below for timeline screenshot of what I mean.Same issue found here on reddit too: https://www.reddit.com/r/editors/comments/zk6jsi/issues_with_remix_tool_in_premiere_pro/ For now I just export it and have a hard copy, but it would be nice to modify these files instead of having to start again from scratch.Thanks!Alessia

It's hard to find someone that doesn't love the new subtitle editing layer. Okay, not that new anymore, but an amazing upgrade! I just want to say I really appreciate your efforts before I bring out my issue. I'm not sure if this is a bug or intentional, but it seems like some editing tools don't work on the subtitle layer. The one I'd like to use the most is "Extend next/previous edit to playhead". I use this a lot while editing to avoid using the mouse, and it would be great to be able to use it in the subtitles layer as well. "Select a clip at playhead" could also be useful. "Go to previous/next edit point", the arrow keys, would also be good. I would expect them to work the same as in the V layers. I'd deactivate all my V layers, activate the C and would hope for them to work just on what's active. But really being able to extend the trim back and forth quickly with the keyboard would be amazing! My cramping fingers would greatly appreciate not having to click and dr

I am using Premiere Pro 2025 on a home built PC (photo attached for specs)I use an Adjustment Layer with VR Digital glitch for a short transition between elements on my timeline. While I have been able to successfully apply it to some transitions, beyond a certain point it has been blacking out the program monitor to the point where I cannot continue editing and have to restart. It also often prevents the program from shutting down properly and I can only close it with the task manager.A few attempts I have already tried to remedy the problem:Restarting the program and the PCDisabling/deleting unseen clips that are covered by the viz where the transition is needed (on one attempt it turned the image incredibly low-poly with only a select colours before eventually going black again)Clearing the Media CacheRendering the timeline (stops/skips the render at the problem area) A post with a similar problem from 2017 mentioned changing the Project Settings Mercury Playback, but for

Can't determine if that's a bug or something that completely makes sense (yeah right.lol)When I double click on a search bin for it to open in a panel (in place, separately or new window)Some options of right clicking a file are greyed out. More specifically: "Hide", "Modify", "New Sequence From Clip", "Speed Duration", "Make Offline", "Proxy", "Create Multi-Camera" and "Label".Funny thing, all of those are available for all files, in the same search bin, only if you expand it and not double click on it.It drove me crazy for some time since I need to only proxy a specific type of files, label specific others, etc. and I am used to double clicking and ctrl-a to select all, rather than expanding the search bin, selecting the first file, holding shift and selecting the last one.Why am I using the search bin to filter files you might ask? It's because Adobe, for some reason decided to change the behaviour of filtering, so instead of revealing only the filtered files (i.e: typing ".mp4" in

I have updated my MacBook M1 Max and run Premiere Pro that was awful experience..I waited some time while PP unfreezed statred to show somethingWhile I edited there were lots of lags during cuts seems like apple becoming windows... anyway, waiting for some patches fixes from PP and aoole updates

When I attempt to open a project in Premiere Pro, it opens and then the program crashes immediately.I have installed a Digital Anarchy plug-in (Flicker Free 3.0.3)  which is used in many projects. I also use Red Giant plug-ins from Maxon (Red Giant Complete) which are also used liberally throughout all my projects. I suspect the Digital Anarchy file is the problem.I am using an HP Z6 G4 Workstation with 65536MB RAM, Running Windows 11, NVidia Quadro RTX5000 graphics card that is up to date.I am running Premiere Pro 25.5I have clients wanting to see their show and I can't open the program. I need help. 

Just to say, this is happening very often on various versions of Premiere. Currently running: v25.5.0 (Build 13) I'm trying to use a simple Color Balance effect to green, with a single mask to make it a little green outline around the edges. It's a short 1 second effect, keyframed for opacity to go from 0% to 100% and then back down to 0%. It generally works fine at first and so I just copy>paste it when needed on an adjustment layer. At some point in the timeline, this effect stops working. Regardless if it's on an adjustment layer or on one of the videos directly, it doesn't apply the effect. Currently I'm 7min35sec in. I've used this adjusment layer with color balance effect applied - 6 times. If I go back to the previous ones, they work. When I copy paste the adjusment layer the 7th time now, it doesn't work anymore. There are no more effects applied and blend mode is on normal. There is only two clips running simultaneously. There is still the red line below the

Subject: Issue with Automatic Relink in Adobe Premiere — Request for Fix in Next UpdateHello Adobe Support Team,I hope you’re doing well. I’d like to bring your attention to an issue I have encountered in Adobe Premiere:I have experienced a recurring error where the automatic relink function fails. When that happens, I must manually relink each take one by one, which is very time consuming— and as they say, time is money. I believe this issue may affect other users as well, so I kindly ask that you address it in a future update.Here are more details:I use an SSD and maintain a consistent folder naming structure for my projects (for example: S3/Weddings/2025/ProjectName).Sometimes the SSD drive letter changes to “D:” or “E:”, but I don’t believe that should prevent manual relinking.The problem appears with original files, and also with proxies. I suspect this might be linked to proxy files having “_1” appended at the end of the filename.I will be sending a short video example to illustr

Premiere 25.3 não está importando arquivos .MP4 (s-log3-cine, s-gamut3-cine, rec709) das câmeras Sony A 7c e da A6700. para demais arquivos como MP3, JPEG, WAV e MP4 comprimido está importando normalmente. Já limpei todo o CACHE, iniciei de forma limpa e tudo mais,  mesmo assim não importa, aparece a janela como se tivesse importando, mais fica inalterada durante horas, obs. o Premiere não trava e responde normalmente quando clico em "cancelar" a importação.Laptop:AMD Ryzen 7 8845HSGeforce 4060 8Gb32GB RAMNVMe 2TbWindows 11 Pro - 24H2

As ondas sonoras (waves forms) simplesmente não aparecem em vídeos mais longos, o que dificulta e atrasa meu trabalho e tempo de edição.Já fiz diversos tutoriais afim de resolver o problema e nada consertou Já reinstalei o premiere, já reinstalei o media encoder, já limpei cachê, atualizei drivers, atualizei windows, já fiz todo quanto é tutorial e nada resolve, nem mesmo desvincular as mídias e usar a opção "renderizar e susbstituir" que costumava resolver e não funciona mais. Preciso das wave forms funcionando pois edito materiais d elongas duração  (aulas de pós graduação) e elas me ajudam a encontrar pequenas pausas durante as aulas que duram em média 3 horas. Premiere Pro Versão 25.5.0 (buuild 13)Windows 10 Pro 22H2AMD Ryzen 7 2700X 32gb ram Nvidia Geforce GTX 1660 super 6gbDriver Vídeo Nvidia Studio 581.29

playback turns black and will only play audio at random points and will only start working after closing and reopening the project. the issue then happens again and the cycle continues. starting to get sick of software that just doesnt work

Cuando aplicó 2 transformar el de abajo puedo usar posición y escala normal pero al usar posición con el transformar de abajo no me permite mover arriba y izquierda por completo y al usar escala se agranda de manera diagonal y no en el centro como tiene que ser 

I just pucharsed Adobe Premiere Pro 2025, and for some reason I can't launch the app. Whenever I try to open it, it ends up giving me an error message ("adobe premiere pro 2025 invalid map <K, T> key".  I tried reinstalling the app, restarting the computer and even formatting the disk, but nothing worked.I'll put a link to the crash report; drive.google.com/file/d/1TYGqbSQZcX42ORDMDVnLGVkDZaWbqPis/view?usp=sharing

When exporting my finished sequence, it wants to export the whole sequence rather than what is selected in the in and out frames. In the Editing tab place the in and out in desired spot.Export the media.Look to see if the in and out bars are showing in the preview tab.Check if the sequence length is correct before exporting.When switching from the editing tab to the exporting tab it should have carried over the in and out frames.When switching from the editing tab to the exporting tab it did not carry over the in and out frames.I don’t have any third-party plug-ins or panels in use or installed.I am using a MacBook M4 Pro and Premiere Pro v25.5.

Hello everyone,I'm encountering a critical issue with the Text-Based Editing feature in Premiere Pro 25.0. The entire right-click context menu in the Text/Transcript panel is completely grayed out, making the feature unusable.This happens when I select any transcribed text (not just pauses), as you can see in the attached screenshot. The feature was working perfectly one day and then suddenly stopped working the next.The most critical piece of information is that this issue still happens even in a brand new, empty project with a completely new and simple media file (e.g., a short clip from my phone). This makes me believe the problem is not with my project file, but with the software's connection to my system environment.Here are my system specifications and the troubleshooting steps I have already taken:System Specifications:Adobe Premiere Pro Version: 25.0Operating System: [Please fill in: e.g., Windows 11 Pro Version 23H2 or macOS Sonoma 14.5]CPU: [Please fill in: e.g., Intel Core i

Product: Premiere Pro and After EffectsVersions: Premiere Pro 24.0 / 25.5, After Effects 24.0 / 25.5System: Windows 11, NVIDIA GeForce GTX 1660 Ti, Ryzen 5 5600, 32 GB RAMIssue:After using "Replace with After Effects Composition" everything works for 5 to 10 minutes. When switching from After Effects back to Premiere Pro the preview turns black for about 1 minute. Then After Effects shows a GPU rendering error. Both apps must be restarted to continue.This happens with NVIDIA drivers 537.58 and 581.xx. No issue with driver 511.09. Tested with CUDA and Software Only. The problem occurs mostly when Premiere Pro and After Effects are linked, but it can also rarely happen in After Effects alone.