Bug Reports

when selecting portions of text i can select and deselct the color fill and it works accordingly, but when i try to add or remove drop shadow from a portion of text, it adds or removes all the shadow effect. 

This problem has existed for many years, but it still hasn't been fixed. If I create a project not with 10-15 files, but if it's about a wedding or some corporate event, I have to import 200-300 files from each camera into the project, and that's when real problems with previewing in the Bin begin. It takes an incredibly long time, and all productivity is reduced to zero.And this doesn't depend on the equipment I'm working on, as it is far from being weak.My configuration:CPU: i9 13900kRAM: DDR5 6000Mhz - 64GBGRAPHIC CARD: RTX 4070Ti - 12GBAll files on SSD and NVMEI will attach a video so you can see how slowly the previews are generated in the Bin

I opened my project, which I've been working on for weeks, and 70% of my clips and audio are gone. The sequence presents itself in the same way but with giant gaps where the clips, graphics, effects, and audio should be. All the autosave shows the same gaps. I've never experienced this before. Can anyone help? I can't find anything online that matches my description.

I'm editing an intro for a short film and I want to export it to the filmmaker separately to get his approval, so I copied/pasted the video file into a new sequence. In the original edit, I had to ADD one audio track, so instead of the default A1-A3 tracks, there are four A1-A4. Here's where it gets weird. After I pasted into a nerw sequence and everything was there (including the fourth audio track) I played it back but A4 was silent. I hit mute off and on a few times, and no dice. I muted everything BUT A4 and still couldn't hear it. I've putzed around with a few things, and nothing is working.  The way I created A4 was by dragging A3 down one row. That created A4. The way I created the new sequence was the typical way we all do: first I went to File-New-Sequence and pasted, had the issue, than did it again by using Command-N and selecting sequence. Any tips? Thanks!

When editing, the screen turns black and glitchy. Additionally, when creating proxies, they sometimes display as a green glitch. This makes editing impossible! Has anyone experienced a similar issue? Any solutions would be greatly appreciated. 

Hey Peoples, Got a weird one here. Premiere seems to be creating a folder in the finder (next to the project) with the sequence name of any sequence I open in Premiere, whenever I open a sequence. If I go to export a sequence in Premiere, it initially wants to export to the corresponding folder that was automatically created. Other than that I have no other performance issues, this is just annoying more than anything. I've tried rebooting. I haven't tossed the preferences yet because I kinda want to avoid it if I can. Has anyone else come across this issue? I'm working in production workflow in Premiere 24.3.0 on a Mac Studio M1 Ultra.  with 128 gigs of ram Mac os 13.6.1 Ventura Thanks from your friendly neighborhood editor,Jake B

When transcribing videos in multiple languages (let's say project 1 is english, project 2 is spanish), and then getting premiere pro to create captions for either or, within the same session, leads to a hard crash, every single time.Please fix. Thank you.

Issue - When using 'Enchance Speech' in the Essential Sounds tab, the audio is duplicated, it sounds like its playing the enchanced audio and the original audio at the same time. It's been happening for quite a while, today I invesigated and realise it happens when Proxies are turned on, turn them off and Premiere plays the enhanced audio only. It's not the worst thing in the world but frustrating anyway. Only one audio track is on the timeline when this happens.Adobe Premiere Pro version number: Version 24.3.0 (Build 59)Operating system - MacOS - 14.5System Info: CPU, GPU, RAM, HD: Retina 5K, 27-inch, 20193.7GHz 6-core Intel Core i5Radeon Pro 580X 8 GB64 GB 2667 MHz DDR4Macintosh HD - Media on External 5TB HDD over USB3.0Video format:Type: MPEG MovieFile Size: 320.13 MBImage Size: 3840 x 2160Frame Rate: 50.00Source Audio Format: 48000 Hz - 16-bit - StereoProject Audio Format: 48000 Hz - 32 bit floating point - StereoTotal Duration: 00:00:12:24Pixel Aspect Ratio: 1.0Alpha: No

Weird bug, but I've noticed that when exporting a timeline with proxies present AND I have anything copied to the clipboard via command C (usually timecode) the below button becomes unclickable, and I have to force quit premiere.  Premiere 24.3.0 MacOS Ventura 13.6.1iMac Pro 1,1 (2017)  

Scene Edit Detection has stopped working on clips with no audio / audio unlinked. See attached video for steps to reproduce:I duplicate the clip in the timeline. Remove the audio from duplicate on the right.The copy of the clip on left with audio detects the scene edits and cuts perfectly.The copy of the clip on the right with audio unlinked doesn't make any cuts.  Thanks!James 

As of the update to latest today the save file doesnt include warp stabilizer so I just lost hours of it analyzing. It also didnt load any previous stabilization from the past saved files so any stabilizing I have done is no longer there and a stupid blue bar is telling me to stabilize again which is days if not weeks worth of computational time.

After using mogrt assets regularly for a year, they are suddenly causing Premiere to crash instantly. I've been troubleshooting for two days, including rendering the video from one project and opening it up in a new project (in case the original project was corrupted), but with the same results once I add a MOGRT.

If you have a caption graphic, and you duplicate it (using the alt + click to drag), or simply slice of a bit, to create a new one, and you do this several times (perhaps 5+ times), Premiere pro starts to lag considerably.The only way to overcome this, is to create new caption every time, instead of simply duplicating. I'm guessing some kind of memory cache is being flooded with previous + new data, multiplied by every time you duplicate the caption.Please fix. thank you.

My laptop is very tired when editing a movie with Software Only, so I use GPU Acceleration (CUDA) when editing. Then it works much better. There are differences, however: all options regarding subtitles; stroke, background and shadow are much less saturated. However, this is the smallest problem. The biggest problem for me is that all graphics with the Transform effect applied to them are buggy. They move strangely diagonally and many others. Similarly, transitions in Premiere Composer by Mister Horse look a bit different. They have a small black bar on the left side. The editing itself with the above-mentioned problems is not that bad. The worst thing is, however, that just before exporting my video I am forced to change it to Software Only so that the video looks good. The consequence of this is that my short 20-second movie in 1080x1920 in 30 FPS exports for 10 minutes. Has anyone had a similar problem? Thanks in advance for your help.

Running Pr 2024 24.3.0 on a Macbook Pro M1 Max 64GB RAM Sononma 14.4.1 When working on a project, Pr just keeps taking RAM up over 100GB as shown on the activity monitor, until the app freezes up. I reinstalled it. Cleared media cache.  It just keeps eating the RAM. Even if I'm not actively editing. What the heck is going on with it??  

There is a lag in the timeline playback cursor. Earlier it was working fine, I even tried reinstalling the Premier Pro but the problem is not going away. I have even deleted all the cache files as well.

Das projekt besteht ausschliesslich aus Handymaterial 30,00fpsDer HEVC Codec wurde instaliert und aktualisiert. Alle codecs liegen vor. Trotzdem erkennt Premiere nicht und der Fehler bleibt. Auch wurde das Verzeichnes gelöscht wie angegeben.  Siehe Fotos. Fehler bleibt. ich kann das fertige File nicht rausrendern.        

I am running Premiere Pro 23.5 on Windows 11.  I have a Threadripper CPU, a 4080 GPU, 64 GB of RAM, and I use proxies.  I make 5 minute wedding videos with 2 songs on 2 seperate tracks and about 5 or 6 dialogue tracks.  Learning from my past mistakes, it is habit for me to lock all tracks and video layers I am not currently editing for risk of accidently deleting a major part or accidently moving a carefully edited song throwing off all the creatively edited music.  When tracks are locked, clicking around the timeline is delayed, zoom in and out of timeline is lagged, and during playback, the playhead stutters down the timeline even though the video playback itself is smooth.  It is frustrating to risk an accidental major mistake just to free up the editing process to be a smooth experience.  Any ideas?

I'm opening this issue again since I can't edit my last post for some reason (https://community.adobe.com/t5/premiere-pro-bugs/quot-replace-with-after-effects-composition-quot-doesn-t-copy-hold-keyframes/idi-p/14764886)I also can't add a reply, it removes the reply automatically. Issue: "Replace with After Effects composition" doesn't work with hold keyframesWhen using the "Replace with After Effects composition" feature in Premiere Pro, hold keyframes from Premiere Pro aren't imported to After Effects. They are ignored when importing to After Effects.Adobe Premiere Pro version number: 24.3.0 (Build 59)Operating system - WindowsCPU: 11th Gen Intel(R) Core(TM) i7-11700KF @ 3.60GHz 3.60 GHzGPU: NVIDIA GeForce RTX 3080, GeForce Game Ready Driver: 560.70RAM: Crucial 16GBHard Drive: Samsung 980 PRO 1TB M.2 PCIe 4.0 NVMe SSDVideo format: AnySteps to reproduce:1. Open Premiere Pro2. Import any footage layer into a new blank sequence3. Right click and choose "Add Frame Hold"4. Right

Hi, Adobe. An issue that seems to exist for ages and that hasn't been fixed so far, perhaps, because no one can explain how it even happens. There's certainly a co-relation between these two standard effects mentioned in the title which makes them glitchy. No big projects, only a new empty project with the media cache flushed, no third party plugins, only these two.1) I create a new sequence with the following settings:2) I import the footage. Any will do. I downloaded mine from the Storyblocks. It has the following specs:3) I drop it onto the timeline (no change of the sequence settings) and apply the two effects to the clip - Basic 3D and Transform.Now (see the first video) - if the Transform effect is above the Basic 3d in the effect controls panel and the Basic 3d values are unchanged, the Transform effect works. Once you change the Tilt or any other Basic 3D value, the Transform's position and anchor point stop working. If you change the tilt gradually and it hits the 0 value, the

When i edit multicam and change one camera it changes the camere before. To be more exact, i change from MC1 to MC2 back to MC1 in multicam editind. All of a sudden when i press button 2 for second camera, the frame before who was in MC1 changes to MC2 and vice versa depending on the camera i am trying to select. The end result is not having  camera 1, camera 2, and camera 1 again but three of the same cameras. I have to go back and check every time i do a sequence of changes. This doubles my time and work and is very annoying. I have a video below where you can see that i have camera 1 or MC1 selected, when i change the camera to MC2 the camera before which was originaly MC1 becomes MC2 resulting in 3 of the same selections 

I've been having problems editing on my 2023 Mac Studio and i'm wondering if this could be the issue?  For context i'm editing a 3 minute sequence with everything proxied and i cant even watch the sequence back because its too laggy. my specs are:Chip: Apple M2 UltraMemory: 64 GBGpu: 60-coreNeural Engine: 32-core 

Wenn ich den Verkrümmungsstabilisierer auf einen kurzen Clip anwende, braucht dieser seit einigen Wochen extrem lange zur Stabilisierung.Für 63 frames werden 7 min benötigt. Das war früher besser, deshalb kann es nicht am PC liegen.Ich arbeite mit dem Mac Mini M1. Update auf die neueste Version habe ich auch gemacht (23.5.0)Was kann man da machen? Woran kann das liegen?

Issue was encountered on Premiere Pro v24.5 (Windows)As I was importing some 4k - 59.97fps (around 5 - 20 seconds in length each) footage to a current project I was working on, I continually encountered an issue where during the importing process, Premiere would start acting very strange, my monitors would flash, and the application would need to be forced to quit. After some investigation via my task manager, I managed to diagnose that my system was using 14 gigs of RAM to import the footage, however, I had only allocated 8 to the application. Even importing the footage in smaller batches of 10 - 20 clips would cause issues in the importing process. Each time I would attempt, premiere would throw a flurry of seemingly random errors (they would all be different every time). The specific behavior I was experiencing would show that Premiere had imported the clips to the project successfully, but after sitting idle for about 10 seconds after the importing process was complete, the ap

instabilité complete de premiere pro , cela depuis quelques semainesreinstallé sur un autre PC les probleme sont identiques sous windows10 ou windows11impossible de travailler !d' autre part en multicam l ' affichage multi est alléatoirele logiel s' arrete message en rouge"premiere pro s'est arrete brusquement alors qu'un projet était ouvert  rouvrir"premiere pro derniere version le 27juillet2024