Camera Raw

   I have Camera Raw 15.3.0.1451 as my current version. I used my camera recently on the APS-C settng with a smaller raw file and now my Photoshop Elements will not open the file says I need a updated version for my  camera.  Know I updated to the version listed above when Sony added this ARW-M file a few years ago and it worked then.  Any suggestions?

Me ocurre lo que se ve en la foto. No se ven los tiradores ni el círculo elíptico. Tengo que deshacer lo hecho y repetir hasta que funciona bien...   (Nvidia  RTX  3060)Observo también que cuando acumula algunas capas basándome , por ejemplo, en retoques individuales, con IA, pelo, glamour,mejorar, ropa...  tras marcar unos cuantos, me aparece el mensaje de cierre de sesión y reiniciar PS.  Con muchas más capas por otras alternativas, no se me produce ese fallo. ¿Qué puede estar ocurriendo?  Muchas gracias anticipadas.(Poco después y haciendo los ajustes emncionados:  

I have an old version, PSCS5 which I had to reinstall on a new computer. I also have a Canon 5D Mark III which needs Camera Raw 6.7. Unfortunately, I cannot find anywhere the download link for Camera Raw 6.7. Looking for: 1) Is there any place I can download Camera Raw 6.7?2) I have an old PC with a working version of Camera Raw 6.7.Is there a way to copy Camera Raw from one PC to another? Thanks

My Camera Filter doesn't work. It stopped working and is not opening at all. What should I do?

I am using Camera RAW v16.4 and LrC v13.4. A recent RAW photo had a particular item of purple colour but it shows as more like blue when imported to LrC - when using 'Camera Standard' profile. I Have not observed other colours to be quite so obviously different. Shown below, camera faithful, camera standard, and the out-of-camera JPG : Observe the centre image (camera standard profile) is more blue'ish than purple.   Looking at the Adobe profiles and all the camera profiles shows that only camera standard, portrait and landscape have this colour shift - I also included the Canon G9x standard (tweaked to show for the G7x), as I understand this uses the same sensor, it too resembles the JPG colour much better: Whilst I can certainly work around this, I thought I'd report the issue as I expected camera matching profiles to be close to the out-of-camera JPG, as it appears to be with the G9 profile.

Hi!I have a problem with Camera raw filter. When I use this filter from Photoshop it looks normal when I open Camera raw filter, but as soon as I touch one of the sliders everything turns white, except for the image. When I hoover over with the pointer, the sliders comes back on the screen, but not the textlabels. This happens on my Mac. I don't have this problem on PC. This is not a problem if I opens a raw file from Bridge directly into the raw filter. Only when I opens images from PS. The only soulution I've found so far, is to open one of the other 'adjustments folders', like Tone curve, Detail or one of the others.Steinar

I tried unchecked "graphic Processor", tried uninstalling and reinstalling photoshop, and also resetting my preferances. Not sure what to do next, and I need help. Anybody Know?

Hi:I have a Sony A6000 which I have shot for first time in ARW files. I have a LR 3.6, old version but it does what I want. I guess you can't import ARW files into LR 3.6.So I DL the Adobe DNG Negative Converter to convert the ARW to DNG. Well I DL both the 13.2 as well as 17.1 Win64 version and I am getting the folloiwng "read only" message during installation. Help, i don't trust other online photo converter and was hoping to use this Adobe converter.  Any advise on why this install is giving me read only error message and when I click remove read only attribute it doesn't work. I can't install this converter. Thanks  

For the past couple of days I've been getting this random warning when using the Remove tool with AI in Camera Raw 17.2 In this case, I got this message repeatedly when I was removing the edge of a reflector being held by my assistant in the upper corner of the frame. Several times I received a message when trying to remove this that "an error has been encountered with your results. Please review our guidelines and try again"I can't see how this usage violates any guidelines ( I did review them) After a few tries I can eventually get it to work properly but I can't see what's going on here. This is a very typical use case for this tool and have used it in previous versions of Camera Raw in the past. I have attached a screen shot of the error as well as the photo in question where the hand an reflector I'm trying to remove are located.Running Windows 11 (26100.3194)AMD Ryzen 7 7900xAMD Radeon 6700X 8Gig64G Ram

When editing metadata (like captions for jpg files I modify in Adobe Bridge), I noticed that some files started generating .xmp sidecars rather than simply embedding the metadata in the jpg file.  It doesn't matter whether or not I set DNG files to always generate xmp files.  For affected jpg files, there appears to be no way to embed the data in the file once this behavior starts happening.  I started noticing this on my new Windows 11 machine (which I started using at the beginning of last month), but I suspect it was already happening on my previous Windows 10 PC.This behavior did not happen with previous versions of ACR.  I've tested Adobe Camera RAW 16.0, 16.1, and 16.2 (which I'm now using) and all properly modify the jpg file without generating a sidecar (if I delete the xmp files generated by ACR 16.3/16.4, I can re-edit the caption to fix affected .jpg files). This is unfortunate since I started using the generative AI remove feature that was introduce

While the DJI models are listed in the "Cameras supported by Camera Raw", there are no camera profiles available. Will Adobe be adding those soon? Drones are an extremely popular way to obtain images and I use them for the archaeological voluteering work I do. I want the very best from my images so am very disappointed to not be able to calibrate my cameras!

I wan't to replace Camera RAW 17.2 with version 15.5 on my  elderly PC with Windows 10. How can I do it, please?Previously, I could just delete the version I didn't want and download a new one, but now CR seems to have infiltrated Lightroom as well as being the file converter add-on to Photoshop.Background...A few days ago, I updated LR Classic, Photoshop and Camera RAW to versions 14.1, 22.5.9 and 17.2 respectively. Adobe CC said all these would be compatible with my elderly system. Unfortunately, the interface in Lightroom Classic is now confused by a new interface that hides familar tools (eg spot removal and other masks) behind strange new icons which often don't work.I reverted Lightroom to version 14.0 (verified in the About... menu) feature but it made no difference.I also keep getting pop-ups advertising AI features that I know I can't use on my current system., and this nver happened before.A little on-line research leads me to suspect that the culprit is Camera RAW 17. T

Al utilizar ACR, eventualmente (1 de cada 4 veces aproximadamente) da un error irrecuperable (ver archivo adjunto)Datos de software instalado:Windows 11: 2025-03 Actualización acumulativa para Windows 11 Version 24H2 para sistemas basados en x64 (KB5053598)Adobe Photoshop: Versión 26.4.1Adobe Camera RAW: Versión 17.2.9.2155Datos de hardware:Procesador Intel i7 10700 (8x2.9Ghz)Motherboard: ASUS H510M-EDisco SSD de 480GB + Disco HDD SATA de 1 TBMemoria: PNY 3200mhz (2 x 16GB)Tarjeta gráfica: Sapphire Radeon RX6400 

Ciao a tutti, con l'ultima versione di Camera Raw mi capita spessissimo di non trovare tra i profili colore a disposizione (colori, moderno, artistico...) i profili colore delle mie macchine Fuji (Astia, Color chrome, Velvia, Provia....). La cosa che mi manda nei matti è che a volte li trovo... Vi è mai capitato? Sapete come risolvere il problema?Grazie in anticipo a chiunque sia così buono da rispondermi.

When I use cutter in Camera Raw, how I can disable grid or change type of grid as in Photoshop? Maiusc+Contro+G doesn't work. In older versions of camera raw you could do this.

The Geometry tool in ACR doesnt work on images where the camera is not level. I usually use the Draw Guides option, but also have issues with the vertical options. It skews the image instead of rotating it before applying corrections. Any angled crop correction is either removed or applied after the tool has already skewed the image. Allowing rotate to be applied before geometry would fix this I think. Another workaround would be adding vertical and horizontal skew correction sliders. I shoot a lot of architecture and interiors and usually can keep my camera level, but the odd time I have to tuck the camera into a corner sometimes it gets angled a little. Pulling one of two photos from a shoot into photoshop (and then making separate save file) to correct this is a pain for my workflow.  Attached an example with just a rotation and then with geometry: draw guides applied

When I edit a RAW file in Lightroom, which creates an XMP file, and then convert that to DNG using the DNG Converter v11.2, all the edits get carried over to the new DNG file except the color profile.  This has recently become an issue for me because I am using the new Adobe Adaptive color profile much more.   Thanks, David  

Hallo. gibt es einen Download link camera Raw version 6.7 für photshop CS 5. Windows

So, I have another problem with ACr 17.1. Whenever I try to target a certain color and adjust it, I only affect the blue and purple sliders, even if I hover on another set of hues. After a certain time, the cursor lags, and my CPU is 100% slowing my workflow. 

Hi, it appears like, after applying Denoise to a raw file, the TAT (with HSL) is not working as expected. I haven't been able to find a previous report on this same issue, sorry if someone did and I couldn't find it.   The following video shows the issue more clearly (normal TAT behavior, then Denoise, then the problem):   https://youtu.be/zC9rlF9am9M   I'm using ACR 17.2 and Windows. ACR is being hosted by Photoshop 26.3.