Camera Raw

recently updated to camera raw 10.1adobe photoshop 2018 cc and bridge, cannot ope nef (nikon d750) file, photoshop just freezes and i have to force shut down. please help!

When will the sony a7r3 be available in the rawconvertor ?

My Lightroom 6 can't read the XQD raw photos, How can I upgrade?

I have just bought a Sony A7RIII but can't use the adobe APS to work on bridge og lightroom, when do we get an update? the update is now available  on On1 and on Capture one 10.@ !

Can you give some kind of time estimate on when the next Camera Raw update will be released that includes support for the Sony A7rIII?I have contacted support and searched the net and it seems everyone is waiting for this, but there has not been a response from Adobe other than it will come when it comes.This is not helpful for professional photographers that have thousands of images piling up.Our only options at this point is to purchase competitors products that do support this camera like Capture One or manually edited our files to look like a different camera before Lightroom can recognize it...I know you have to receive this from Sony so you can work on this and find it hard to believe that you haven’t and if haven't would hope you are pushing hard to get it and not just waiting.Either way an update of some kind would be nice.  Something like ”we have no estimate as Sony has yet to release what we need to build it”, or will be available soon, by Q1 2018, by 2018, by 2020, som

How do I download ACR 9.8 for installation?

Hi,I need to open raw files from the new Sony Alpha 7R III . These .ARW raw files are not supported in the latest CC Version.Did anyone know when it will be possible ?Regards Frank

Hi All,I work in a photography agency as a desk editor. 3 of us work at a time from 3 different machines editing pictures from an FTP to send them off to another office. To help us with matching our edits together I was trying the figure out if I could make RAW save the XMP's for an edit to just one folder for the three of us.So to be clear, instead of saving our edits to here:D:\Users\dylan\AppData\Roaming\Adobe\CameraRaw\SettingsI'm trying to change the default location to something like:\\192.168.101.215\all transfer foilder\EditsI realise you could just manually change where you are saving the image but I'm trying to set up a workflow where the "Apply Preset" option will populate with edits from all three of us and not just the one machine as speed is an important factor in our job.If anyone would know a solution to this query it would be much appreciated.Thanks,Dylan Flanagan

is this a problem?thanks

I open a RAW or JPG file using PS or Bridge and when making my adjustments in ACR the popup prompts will stay on the screen after the file is opened in PS. In other words there are a bunch of ACR "yellow" prompts in PS which cover the screen after the file has been opened in PS. Closing out PS will clear out the prompts.A screenshot is shown. I am running PS/ACR on a MacPro with Retna although this has been an issue with previous releases of the OS. Thanks, Ted

Have just bought D5600 and tried to download nef pics into cc6. Won't recognise the files. So tried to update cc6 version  [1014445] on windows 10. Get  a message to down a new version of Adobe application manager. Tried doing that and get error 50. Any ideas please ??

Hi there.I'm trying to find out if I'm doing something wrong.And as far as I know, many PS users struggle with understanding profiles and assigning them so maybe this thread will be helpful for others.My monitor profiling and overall color management workflow is this:1. unassign any profile from my displays, then calibrate each monitor - create profiles.2. assign proper profiles for each monitor in Windows Color Management setting.3. In Photoshop go to Edit->Color Settings and for RGB change profile to "Monitor RGB - XXXXXXXX"4. I disable Color Management Policies for RGB images.To test if everyting is fine and that I see all color properly, I create an image with 3 color spots: 100% Red, 100% Green, 100% Blue.I take a 'print screen' of this image and paste it into Photoshop. When I measure these three colors and they are 100% then all's fine - I see what I'm supposed to see..The problem comes with Bridge. Thumbnails show something completelly different. And I understand it's becaus

10 would not work.9.8 did.but it looks in a folder that is no longer there.so i remade to folder and put raw images in it.but it could not find files there.how do i totally remove the software so it does not remember where the files used to be.yes in win 7 i removed the program in the usual way.help!thanks all

Hello, dear developers!Could you please add new keyboard shortcut for "Export settings to XMP" option? It could be "Ctrl + E" or "Ctrl + Shift + E" for instance. Both shortcuts currently are not used.It's oddly, that so frequently used option still has no key shortcut. Personally I use it very often (cause I don't want to lose my edits in the middle of the process) and going to menu every time I want to save settings is a bit annoying as it takes time.

I just updated to Bridge CC 2018 and ACR 10. When processing in ACR I select all and Sync settings and it only corrects the image directly under the one with the corrections not all the images I have selected.  VERY FRUSTRATING!Any suggestions? Quit Bridge and re-started to no avail.Thanks, Sally

Hello everybody,I assume that I am not the only one having the following :Camera Raw cannot load the icc's profile Gray Gamma 2.2 in the workflow (I can choose many differents icc profile but not his one). I have checked this profile is present in where it should be in Library/ColorSync/profiles/Does anyone have an idea ?Many thanks in advance.

After upgrading PS and Bridge I have the following problems.  PS has stripped all of my filters and Plug Ins, Bridge will no longer open files in Camera RAW and cursor key strokes no longer work.  If I open a RAW file in PS it seems to be reverting to an older version of Camera RAW.I have to get everything working again and need to go back to the 2017 versions of the apps - what is the best procedure for doing this?

On one of my computers sony .arw do not show a preview in Bridge (in every bridge; 2015, 2017, 2018). The problem might be a corrupt preference in Bridge. However Bridge on my other computer handles .arw files well. They both are running os x high sierra and Bridge 2018. As I have made several custom standard preferences for specific camera number and specific iso, I like to copy the preferences from the bridge version that works well to the computer that doesn't work well with the .arw files.

Please bear with me, as I'm just learning visual basic. I'm at the initial stages of checking that the SDK is installed correctly, but when I build dng_validate, I am stuck with two unresolved external symbols: gVerbose, and gDumpLineLimitMy steps so far are as follows:1) I'm using Visual Basic 2017, so I also installed Visual Basic 2013 (update 5), in order to work correctly with the v120 platform toolset2) Under dng_validate properties, the Platform toolset is indeed set to Visual Basic 2013 v.1203) my folder structure after unpacking the dng_sdk 1.4 contains the three folders, & one file:     dng_sdk     libjpeg     xmp     ReadMe.txt4) within the libjpeg folder, I have renamed jconfig.vc to jconfig.hAre there any other dependencies I need to install? or steps to take to have dng_validate correctly compile?

I have just upgraded to a Canon 80d and my Elements 9 won't open the RAW file.  I believe I need RAW 9 at least for the 80d and my Elements 9 is working on RAW 6.  I have tried the updates section on my help menu to try and force an update but nothing happens.  I have also tried to find a link on the adobe website to manually download an update.  I have come across the option to use the DNG converter but really don't want to faff around doing this every time I download images from my memory card.  Surely every time you upgrade your camera you shouldn't have to buy a new version of Elements?  There must be a way to update the programme?

Hi Does anyone know how to open Nikon D850 RAW files...I have some sample pics taken 2 days ago but can't open through Lightroom,Camera Raw,DNG converter or Nikon software?ThanksJon

Bonjour,J'ai fait MAJ Mac 10.13.1 et depuis lorsque je mets les captions Photoshop CS5 et Bridge quitte

When I was working with Adobe Camera Raw (version 9.12.1.790) on latest macOS 10.13 High Sierra following bug occured: hovering with the mouse over ACR menu and commands quick infos appear. Normaly they vanish when the cursor is moving on. Now it can happen that the quick infos (looking like yellow post its) persist and do not fade out again, blocking the view to the interface (see the screenshots).I use a 13" MacBook Pro (2015) with an Intel Iris Graphics 6100 1536 MB, Metal turned on.Strangely it only happens when you start the plugin from Adobe Bridge CC not Photoshop CC (where I turned off quick infos).Is it possible to turn quick infos off in Adobe Bridge CC or ACR GUI?GPU performance turning on and off doesn't help.

When I drag  DNG file into PS,   before the file is opened in the native PS window,  i get the popup window of Camera Raw, where I can crop/modify picture, and RE-SAVE it as DNG :However, when I re-open the saved file again, and click crop, then it reinstates in the INITIAL, THE ORIGINAL PICTURE...How can I avoid that? When I modify/crop the DNG and save it again as DNG, I want that last DNG was the final file (so,  I want that cropped area was lost forever)

When I import DNG/RAW  image into PS, I get the popup:I am interested,  does it matter, if I change these settings while importing DNG, or can i import, save as PNG , and then later, modify the CURVE/COLORS with PS native-settings, instead of CameraRaw popup window?  Will the results be the same ?  I ask this because, i couldnt understand if it matters where I modify the image - during the import or in PS.