Camera Raw

This may be specific to Nikon mirrorless Z-series cameras. When I go to edit a RAW file, the image file opens in ACR with the color profile selected that corresponds to the type of picture control selected in the camera. For example, if the in-camera setting is SD (standard) the profile selected as ACR opens is "camera standard v2" or "camera standard" (depending on the camera used). This to me is correct and what I would prefer. However, if I open the drop down menu what I see for selections are the adobe profiles, no camera profiles (see OpeningView.jpg). At that point if I select "adobe vivid" or any other in the menu, the profile changes to "adobe vivid" or whatever was selected (as it should). If I then open the drop down menu again, I again see the adobe profiles but the "camera standard" profile is not there --it essentially has disappeared (see NoCameraProfile.jpg). To select it again, I have to click on the button to the right of the profile window and navigate my way through

Is 9 seconds a reasonable amount of time for Camera Raw to open? I keep feeling that this is slow, but maybe i'm impatient. it's been this way for a while. I have a pretty good system too.I tried a bunch of things already w no change: GPU hardware accel on vs off, reinstalling programs including the ACR plugin, exlcuding all adobe folders from virus scanning, opening files (either CR2 or JPEG) from local vs network drives, opening one vs several files at once, opening from File Explorer vs Bridge — always the same time for it to launch. Caches/scratch for all adobe programs are set to local M.2 drives. Everything else seems ok tho -- happy with performance once it's open.ACR v 15.2.0.1381AMD Threadripper 3960X64 GB RAMNVIDIA 3080 Ti

1. Raw files are processed in ACR (15.1.1); masks can be created and renamed.2. the processed raw file is then processed by DxO PureRaw and a new dng raw file is generated3. the generated dng is opened again in ACR;  new masks can be created; Existing masks prior to the treatment in PureRaw or newly created masks cannot be renamed. The masks of the dng raw files generated by PureRaw can be renamed in Adobe Lightroom.The problem does not occur if I export a dng in ACR between step 1 and Step 2 Under Windows 10 64bits

Dear community and Adobe Support,in recent versions of CameraRaw it automatically did some tonemapping prior to opening the image. In v15 this behaviour has been switched (and no tonemapping seems to be applied on opening an .exr).Can this be turned off to fall back to the old behaviour? Is there any other way of getting the exact same Tonemapping behaviour prior to doing exposure/gamma adjustments in cameraraw?kind regards,Rasmus 

Hi. I've just tested the AVIF HDR output on ACR 15.1 on Apple Silicon Macbook Pro. It seems broken when GPU acceleration is enabled. The exported images are distorted. When GPU acceleration is disabled in ACR, the HDR content cannot be displayed, but when exported it's correct - it is correctly display by supported browser (Chrome 108+)   Br, Pawel

Hi All,   First time posting, this issue has been annoying me since I picked up this new camera. Sony A7IV with sigma 24-70 2.8 DG DN A019 is under correcting vignette on wide 24mm end and over correcting on 70mm end. Almost like the vignette correction profile is backwards. See attached shots at 24, 35, 50 and 70. Lightroom is latest 12.0.1 release, camera is latest 1.11 firmware and lens is v.03 (tried updating to v.04 but sigma software wasn't cooperating, sigma says this update just allows MF assist).  What I have tried:   Turning all compensations on in camera Turning all except shading compensation on in camera (suggested on other posts) Turning all off in camera and selecting in lightroom once imported   All give the same result. I have also tried switching correction profile versions which sometimes yields a better result at a certain focal length but it's hit and miss.    Any one else having this issue or know of something I might be missing? &n

We're happy to announce the release of Adobe Camera Raw & DNG Converter 15.2   What's new in this update?   The February 2023 release of Adobe Camera Raw (version 15.2) provides support for new bug fixes, cameras, and lenses. To know more, see: Fixed Issues  Supported cameras Supported lenses   Download DNG Converter 15.2   To update Camera Raw to 15.2, click "Update" in the Creative Cloud desktop app next to Camera Raw. More detailed instructions for updating

Hi all , I am using windows 10 & the newest version of Photoshop (Everything is Up-to-date)  Camera Raw Version (Version 15.1.1) however doesn't actually show an image (just a grey screen) , all the buttons / sliders work , but I can't see what I'm changing ?   Then after selecting "open" the image will show perfectly in Photoshop.  I've tried resetting preferences (no change) I've tried both with & without the Graphics processor  ... I'm not a Computer genius, I just want to edit some photos 🙂 

Hello to allI have a problem with raw camera.I have a problem with the camera raw. When I want to open a raw file, photoshop starts up but then freezes and the camera raw does not open, so I have to restart my pc.When I open photoshop no worries but when I want to use the raw camera filter it blocks me again photoshop, while photoshop alone works fineThank you for helping meYves

Can anyone help?  I have been using this converter and loved it.  All of a sudden it is only showing a wide format aspect ratio when just days ago it was downloading and converting 4:3 with no problem.   I am converting Sony ARW files to DNG.

Hi.I'm experiencing nasty bug with Content Aware Remove in ACR 15.x on older CPUs.In Lightroom Classic ACR (builtin) crashes with "illegal instruction" exception (0xC000001D) due to use of SSE4.2 instruction which my CPU doesn't have.If started from Bridge - ACR crashes with the "illegal instruction" exception (0xC000001D) at the same code, and then with the "stack overflow" exception (0xC00000FD) and Bridge dies.As I can see ACR have different code paths for various CPU features present, at least code pathes for SSE2 and SSE4.2 are present.Everything else apart from Content Aware Remove works just fine.CPU is pretty capable with 6 cores at 4.0 GHz, it's just an AMD CPU and it have SSE3 and SSE4a at maximum, no SSE4.2Is it possible to make requirement of SSE4.2 optional as it was all the way before release of ACR 15?It's just a matter of one compiler switch after all...I can provide technical details on where exactly ACR crashes if this will help.This all happens under Windows 10 22H2

please help.  And also, I can't find the adjustment brush in camera raw?? 

Hi CommunityI recently bought the Panasonic Lumix TZ-202D (the D at the end is important!). I found out, that the Raw files of this camera need at least Camera Raw 15.0, my Photoshop Elements 2022 contained only version 14 something. So, I downloaded the latest version 15.1 for Windows 10, restarted my notebook, started Photoshop 2022... but these Raw files could still not be edited. So I bought Photoshop Elements 2023, but this also comes with Raw 14 only!How do I tell Photoshop Elements 2023 to open the Raw files with the latest Camera Raw version 15.1? When I use the option 'Help > Install Camera Raw', nothing seems to happen; I still have Camera Raw 14 which is linked to Photoshop.Your help is much appreciated; thanks a lot.Best wishes for a happy New YearKurt

My camera raw is up to date but every 2nd photo I open in Camera Raw is sideways. I have deleted preferences but nothing is helping. This has only started happening with the last two updates. I'm on a Mac OS Montery 12.6.3. Any thoughts anyone?

Hello! I am learning how to learn Camera Raw through a college class and have run into an issue. I am missing the top toolbar and the image adjustment tab. I will include a screenshot of what I am seeing. The version I have is 12.3, which it says is the latest version. I am editing on a Windows computer. Any help would be greatly appreciated! 

Hello, I am having the aforementioned problem. As a wedding photographer I am using two Canon cameras - EOS R6 and EOS R as a second body. On some ocasions I take pictures with both cameras almost simultaneously. The RAW files generated by these cameras are named diferently. When I open the files from both cameras in Camera Raw I sort the pictures by date taken and they all came in the right order, but when I am done editing and start exporting, the generated jpegs are not following that order. The program first reads and exports the files from my EOS R6, and then exports the files from my EOS R. The result is quite messy and really slows my workflow. Any help will be appreciated/

Can any one explain how I can convert older .lrtemplate BRUSHES to work in ACR? 

Hi, I'm trying to locate the brush tool in my camera raw, but is just not there. What could be the problem?

Hola en la pestaña de geometría, cuando uno hace transformaciones manuales, aparece una cuadrícula de ayuda visual que me resulta molesta y quiero apagarla, pero parece que no existe opción para hacerlo. Creo que me hace perder tiempo valioso de edición.

Does anyone have experiene processing Apple ProRaw images in Photoshop? Specifically, keeping the profile as Adobe ProRaw, the slider directly below is "Amount". What does this adjust? Gamma?

LR Classic 12.1 Camera RAW 15.1 Hassleblad H5D 40 CCD image Phocus shows the image fine. When imported into LR it is adding a line through the image.  Just below mid image. Looks like a thin horizontal yellow line. This is being caused by LR, not the sensor.   I can provide a link to the RAW file: https://www.dropbox.com/s/afi75nt5824m0ig/013_24-QX-03%20Phoenix%20Decor%20-%20Up.fff?dl=0   can contact me thru ericmuetterties.com

When using the crop tool on a Win 10 PC with GTX980Ti  here with latest Nvidia Drivers (and previous) and ACR 1388 we are getting screen corruption whilst rotating the image to crop.   This can be avoided using CPU only, but is slower as the rotating of the RAW to crop is obviously quite a high workload.   (Obviously having the legacy crop option available would also have solved this issue, as the image would not need to be able spin..)   Interestingly (or not) this flicker is not recorded by a screengrabber, (Acethinker Screengrabber Pro)  - which could be a clue perhaps?     I would suggest this level of flicker/corruption could be a danger for those with photosensitive epilepsy.  By the way, it would be great if the topics below included the plugin that this board refers to.

With the recent version of ACR I have found the radial mask tool has regressed. In previous versions, once I dropped the initial mask onto the image I could easily manipulate size and location of the mask, as well as the feather and utilize the various sliders. Now, unless I place it exactly where it is needed, I have to delete and try again. The mask can be sized bigger and smaller, but can't be grabbed and moved to make minor or major corrections to placement. In short, my work flow has been severely impacted by reverting to what seems like a Beta version of what was a really effective tool.  I am using Windows 10 with the lastest ACR version. Any chance this will be addressed in the near future. I doubt I am the only user impacted by this issue. 

Hi, Every time I get into Camera Raw (from within Photoshop) - the mouse cursor shrinks to a tiny black arrow - making it very hard to tell where it is on a high density scrren (4K) on a workstation (17 inch) laptop.  Can the developers remove Camera Raw's mouse cursor control - and use the default Windows mouse cursor?   Thank you,Ting Sern

I'm trying to download a legacy version of Adobe DNG Converter but I cannot find any legacy version on Adobe website. Where should i look for it?Thank you!