Camera Raw

When using the Camera Raw Filter from Adobe Photoshop Version: 19.1.3, running under Windows 10 I am getting coloured horizontal bands instead of my image. I have reproduced this with several other photos and there are always bands instead of pictures (see example below which should show an image of a face). I have no problems when using ACR from Bridge, the problem only occurs with the Camera Raw Filter.This problem has only occurred in the last few days and, during that time I have installed the new Windows 10 April 2018 update. I have however been unable to find anybody reporting a problem with the filter after installing the Windows update so this could be a red herring, I have tried enabling and disabling the graphics processor  but it made no difference. Has anybody any suggestions?

I have been working with Tamron on an issue regarding Raw files meade using the Tamron 18-400 ziim lens witht he Canon R6, The camera is set to use the crop factor. The lens & camera firmwares are up to date. When I bring a raw file into bridge and on into camera raw there is a white/light vignette around the image. This does not happen with any other app - only photoshop. and raw images. If I import the photo to other apps like ON1 Raw there is no vignetting. My prefernce has always been to use PS for photo processing. Any help will be appreciated. This does not happen with any other lens I sude with the R6 and the adapter.

Hello,i need the profiles for Sony a99 m2, the Tamron SP 24-70 2.8 and the Tamron SP 70-200 2.8So in this article  i found that they shoud be located at %ALLUSERSPROFILE%\Adobe\CameraRaw\LensProfiles\1.0"and%ALLUSERSPROFILE%\Adobe\CameraRaw\CameraProfiles\Adobe StandardUnfortunatly, both folders are empty.Any idea where i can get the profiles?best regardsSteve

Using Canon R7, CR3 RAW files: I have discovered vertical bands when I shot in low light using higher ISO (ISO 1600 and up), when I process using the latest Camera RAW Using Windows 11. When I process using Canons latest DPP software the bands are not there.  This is with standard settings, no exposure change or other changes except standard sharpening.

Hola a todos, estoy teniendo un recurrente problema cuando estoy editando en camera raw versión 14.4.1. Me aparece un error con la GPU Geforce 1060 6GB, esto empezó hace unos días y a partir de ahí pasa cada hora aproximadamente. Alguien me puede recomendar que hacer. Desde ya muchas gracias.

Hope phrasing this correctly. I used to be able to select 10 images, command A, Mac.Then adjust first image.There was a keyboard shortcut to sync all others without bringing up the box... Still around? Can' find. thanks!

Hallo Zusammen, ich nutze Camera Raw Version 13 unter Photoshop Elements 21, dies ist so durch das Studium gestellt. Mein Problem ist, dass nicht alle Werkzeuge angezeigt werden. Aber auch die möglichen Einstellungen nicht wie dargestellt vorhanden sind.  Die obere Leiste ist komplett leer und auch in der  unteren Leiste ist nichts was helfen würde.Ich suche jezt schon Stunden. Habe alles aktualisiert und sogar neuinstalliert. Ich komme leider nicht weiter. Ich hoffe ihr könnt helfen! Viele GrüßeAline

HiPhotoshop has suddenly stopped opening .orf files. I get a message that says 'Could not complete your request because Photoshop does not recognize this type of file.' I have updated Camera Raw to 14.4 but this hasn't helped. Is there a fix for this problem?

Hey all! Question for the Camera Raw community. We have built a plugin that assists with LR Classic workflows. Many Camera Raw users have requested access to the plugin for their workflows. Does anyone here have insight into the potential of transitioning the LR Classic plugin into a Camera Raw workflow? I haven't found much on building plugins with Camera Raw but curious if there are any roundabout ideas. Thanks! 

HI, I saw this Photoshop Raw screen during a tutorial and I see the following screen.  This screen has the tools on the top and on the side.  When I open up min I see this:There is no tool on the top or side of the screen.How can I get the tools on the top and screen like the above picture?  Thanks

Trying to figure out how to toggle a before and after preview of only the last change made in Camera Raw. The \ shortcut allows me to toggle the original and current versions (with all changes) but I'd like to do that for just the last change. Sort of like an undo/redo. Is that possible? 

Under Preferences> File Handling> File Compatibiliyt> I have unchecked the "Prefer Adobe Camera Raw for Supported Raw Fiels" boxUnder Preferences> Camera Raw> I've set DNG file handling to ignore sidecar XMP and disabled JPEG & TIFF handlingI closed then restarted Photoshop STILL when I open atttempt to open a Raw Nikon NEF file it FIRST opens in ACR. I've tried opening from within Photoshop and from Windows Explorer. I have a Windows 10 PC using Photoshop V 23.4.1 WHAT AM I DOING WRONG??? Help!  - Kevin  

Blows my mind how much of a pain this now is and has been for quite some time now. Can't say if this applies solely to 14.3 or if it goes back farther; since I've been dealing more with videos over the past couple years or so.  But Jeez! I've a very powerful PC with RTX 3070ti / 64 GB Ram / Ryzen 5950x and fast SD drives. YET, this crap blows. Takes 29 seconds to open up a (nikon) NEF file or (panasonic) RW2 file. If I hit cancel thereafter? Another 9 seconds wasted. Pathetic.   I've tried numerous different approaches and it's always the same. Mind numblingly frustrating. 

Hi everyoneCamera Raw is not supporting my GPUBut the same is supported on Lightroom and Photoshop.Anyone can solve it?Thanks   

I have the oddest little problem.  I'm running Windows 10 with the most up to date NVIDIA driver and CC apps.  When I open a RAW file, regardless of the program it's being launched from (Bridge or a file manager), the file opens rather slowly and right before it does, a little window opens on the upper left of the screen with what appears to be an error message, however it's only there for a fraction of a second before it disappears.  It's not visible long enough to read the message.  Flash and it's gone. I get a glimpse of a couple words like "need to" but that's it.  This began one or two Camera Raw updates ago.  Resetting preferences doesn't seem to make a difference.   Camera Raw has set the graphics processor to Auto and says my system supports full acceleration.  Changing the processor setting to custom settings doesn't make a difference either.   I can't find any other settings that might have an influence.  Has anyone else exper

I create one folder in adobe bridge and order my images from both canon r5s in to time order. Ive always been able to group them togther in batches and open and edit them in camera raw. Now all of a sudden camera raw is sperating the to camera bodies in to two seperate foldrs when placing them in camer raw!

Is there a way to open .ORI Olympus RAW file in Camera RAW? Renaming the .ORI ending to .ORF is messy, because the .ORF file is the high res Olympus RAW file (50 or 80 MP). Any way to set Camera RAW up so that it can process .ORI files? Alfred

Up until recently when I adjusted anything in Camera Raw and either continued to ps or clicked done, these settings would stay attached to the file if if was to open the file back up in camera Raw. With the new update, something changed, now I have to re edit in camera Raw everytime. If I have 30 images I have individually adjusted in camera Raw and ps crashes bringing them in....all that work is lost. Please tell me  there is a setting or a work around I am missing?  

I've recently been attemting to generate Super Resolution files from raw files and have been seeing this message:I've had uniformly good success and great results with the Enhance utility. I recently updated to PS Ver 23.4.1 so I reinstalled PS ver 23.3.2. Unfortunately< I'm seeing the same error message.  The raw files are Sony A6500 .ARW raws. Conversions to the standard sized output go without a hitch. Has anyone else out there run into this problem and (hopefully) come to an understanding of what's going on and how to fix it? 

Hi. Once again update to Adobe product is released and no ANY information on what was added or fixed on Adobe's website. I really don't get it - is it that hard to publish release notes? Please provide some information on what was changed in ACR 14.4.1 that was released recently. Thankyou.

For example, when I create a new mask, the mask panell covers the upper right corner of my image. I need to move this to my other display, so I can see what I'm working on. When I return to Camera Raw at a later time, I have to repeat this process, moving the panel to a different location. In applications like Photoshop, Illustrator, InDesign, Premiere, I am able to save my workspace, as well as set a default workspace that I can load. Is there any feature in Adobe Camera Raw that will help save the workspace, or cause new panels not to cover the image area while working? Maximizing the image area is important. If all panels could be moved to another screen (similar to how many of us work in Photoshop or other application) that would be very helpful. If no features or work-arounds exist, then I'll resubmit or edit to be a feature request.

Photoshop updated 3 days ago, now when I try and create 'Enhance Details' in ACR I get: Unsupported Hardware "Enhance Details requires a graphics card with Metal support".Any fix? is there some preference type file I have to trash? (i saw this fixed it for someone that had the same problem in LR).This worked before update. Macboo Pro, OSX Catalina, ACR 12.2, graphics: Intel Iris 6100

In the old days when using Camera raw I could set my ratio and just draw a box to crop the shot. Nowdays I have a box that I have to drag the edges to crop the photo. Can't I just drag the crop like I used to? Thanks.

In ACR 14.4, there is no degrees Kelvin adjustment in Profiles. Only Adobe profiles (and only in RAW files i.e JPEG images only have colour or monochrome). I miss the options of 'cloudy', 'shade' or simply selecting a colout temp eg. fine tuning daylight from 6500K to 7000K?