Skip to main content

Filter by idea status

10000+ Ideas

Back to top of the list
daniels86969199
daniels86969199Participant
 Feature Requests

P: Alert/Show the user that multiple images will be affected during DevelopOpen for Voting

Provide either a prompt (upon the first type of change) and/or a status indication in the Develop module that your changes are affecting multiple photos.  There has been countless times, where I have inadvertently, accidentally thought I was doing changes to one photo, when in fact multiple photos were selected and thus were affected by the changes.s

2
daniels86969199
1 year ago
PrimeEdits
PrimeEditsInspiring
 Feature Requests

Solo track button for video tracksOpen for Voting

Wouldn't be amazing if there's a button to solo video tracks in premiere pro just like after after effects? 

2
PrimeEdits
1 year ago
PSEBASParticipant
 Feature Requests

Versiones aplicaciones y versiones windows.Open for Voting

Si una version de sistema operativo no es compatible con las nuevas versiones, no deberia permitir instalarse, o al menos indicar que el sistema operativo no es compatible, y que sera probable que tenga funcionalidades limitadas, o incluso que si se instala o actualiza a la ultima version disponible, no funcione de funcionar completamente.   Ver: https://community.adobe.com/t5/premiere-pro-discussions/volver-a-una-versi%C3%B3n-anterior/m-p/14923841#M533158   Por ejemplo: Hemos comprobado que en equipos con Windows 10 ltsc 2019 y muy probablemente tambien con Windows 10 ltsc 2021, existen gravisimos problemas si se instalan las actualizaciones ofrecidas por la aplicacion de escritorio Creative Cloud de diversas aplicaciones. En: https://helpx.adobe.com/es/creative-cloud/system-requirements.html que la ultima versiones de la aplicación de escritorio Creative Cloud requiere al menos Windows 10 (64-bit), versión 1903 y posterior* *Ya no se admiten versiones de LTSC anteriores. Si utiliza un sistema operativo antiguo, se instalará la versión correspondiente de la aplicación de escritorio de Creative Cloud aplicable, según la plataforma y el sistema operativo respectivos.   Y por lo tanto en Windows 10 ltsc 2019, aparentemente no deja instalar una versión superior a la 5.x  (aunque se intente instalar la última versión), y el problema es que la ultima versión de la aplicación ya no deja instalar versiones antiguas de la aplicaciones, y solo permite actualizar a versiones mas modernas (que no son compatibles con el sistema operativo!!!!!)   Respecto a Premiere pro, tal como se indica en su web, los requisitos mínimos oficiales son: Premiere pro  25: Windows 10 (64 bits) versión 22 o posteriores. Al actualizar a esta versión dejo de funcionar.   Premiere pro 24.x también se indica que oficialmente requiere: Windows 10 (64-bit) V22H2 o posteriores en un principio la versión 24 si funcionaba (aunque con algunos problemas) en Windows ltsc 2019   Premiere pro 23.x parece que funcionaba perfectamente incluso aunque los requisitos oficiales son: Windows 10 (64 bits) versión 20H2 o posteriores   Por lo cual: Sugiero que: a) En la aplicacion de escritorio creative cloud: Exclusivamente se ofrezcan actualizaciones de aplicaciones compatibles con el sistema operativo b O si la actualizacion no es compatible con el sistema operativo, avise de ello, o de las posibles limitaciones o si es completamente, y que se recomienda no actualizar, etc....

0
1 year ago
BeeldMakerParticipant
 Feature Requests

Using Photoshop Beta as a Plug-in in Lightroom CCOpen for Voting

Also  a setting in Lightroom CC 'last PHP to default' (Not Beta).So whenever you want to enhance in PHP it always goes to the last PHPAnd whenever you want to use a particular tool you can directly go to PHP Beta(as plug-in)

0
1 year ago
Nick28589864u33wParticipant
 Feature Requests

Show number of selected itemsOpen for Voting

When selecting items in bins it would be SO helpful to show how many have been selected.When moving footage around between different media storage it's useful to know you have X number of footage in the bin or in the current selection.

1
Ann Bens
1 year ago
라뚜59_2Participant
 Feature Requests

Fix this crappy Label right now!!!!!!Open for Voting

I can't stand it at allI can't stand this garbage label patch even if I try to use it.The visibility is too bad.Adobe says they patched it to improve readability,but it actually makes the worker's work speed like garbage.Rather, the high contrast hurts my eyes.Of course, some users may like it,but many opinions, including mine, say it's garbage.Also, it's not clear whether the Fx effect is applied or not. (See attached file)You have to click or play to find the applied effect.This label patch is just garbage in every way.It's the worst patch that slows down my work speed.Please, please, please roll it back pleaseIt's really garbage. Please.

1
Ann Bens
1 year ago
Bernhard31106906hfziParticipant
 Feature Requests

P: Customize order of control in Library ModuleOpen for Voting

Hallo zusammen, gibt es eine Möglichkeit in LrC (14.0.1; Windows 11 - Business, 11.0.22631) die Reihenfolge von den Bedienelementen (Histogramm, Stichwörter,...) im Bibliotheksmodus anzupassen? Bei einem Rechtsklick in den Bedinelementebereich kann ich nur die einzelnen Elemente ein- und ausblenden, bzw. minimieren oder maximieren.Meine Recherchen endeten immer bei der Reihenfolge der Bedienelemente im Entwickeln-Modus, was ja möglich ist.Falls diese Funktion fehlt, möchte ich anregen diese einzubauen.Danke im Voraus und viele GrüßeB

1
1 year ago
Nate241386699jj4Participant
 Feature Requests

Photoshop Generate Image Assets using .webpOpen for Voting

Can adobe add .webp to the Generate Image Asset set of options in photoshop.

1
Stephen Marsh
1 year ago
rachelcenter
rachelcenterLegend
 Feature Requests

feature request: SpeedOpen for Voting

in premiere you can take a slow motion clip and speed it up to 350% for instance using "speed". but if i want to take that RAW slow mo clip into After Effects (and make sure it has the same speed as the sped up clip on my premiere timeline) time remapping doesnt let me choose "speed". So I drag around the time remap keyframes but there's no telling whether I dragged it to change the speed to 350%? 400%? 247%?? There's no solid indicator to tell me what speed I've sped it up to. And there's no exact number to dial in to get the same speed as the sped up clip in premiere (without exporting the clip out of premiere with the speed on it). Can you add the "speed" feature to After Effects?

2
rachelcenter
1 year ago
jMYParticipant
 Feature Requests

Enable to trigger app clip for ordinary links on a webpage. In the same way as when scanning QR.Open for Voting

I’m designing art parks where visitors can experience 5-10 different artists' works along a 1 km path. On my website, I list all the artworks, helping users find each piece. Each artwork has a link to Adobe Aero. If the user hasn’t installed the app, they’re directed to an Adobe page that says the content can’t be viewed. There’s a link in the top corner suggesting the user open the Adobe App Clip.This is where most people’s experience ends. To improve this, it would be much better to trigger the App Clip card when clicking a link, while staying on the webpage. Apple allows this through the following link: https://appclip.apple.com/id?p=com.adobe.aero.clip. This triggers the App Clip, but there’s no way to pass your ID or link to the specific artwork. However, there’s a function to add parameters, so a solution might look like this:https://appclip.apple.com/id?p=com.adobe.aero.clip&id=123ABC. An even better solution would be to automatically open the App Clip upon clicking the link, but I believe there are security risks involved with that.

1
1 year ago
RolandLBC
RolandLBCParticipant
 Feature Requests

Share for review button Frame.io intergrationOpen for Voting

Support for Photoshop, InDesign, and Illustrator files in the Frame.io ecosystem was announced at MAX 2024. It would be easier to take advantage of this new feature if there was an option in the Share for Review dialogue box to share to Frame.io instead of creating a generic share for review link.Adding Frame.io as a review tool for all creative workflows is a great idea that I would like to take advantage of with my team and stakeholders, but as it stands the process of getting a .psd, .indd, .ai file into frame.io by saving the file, then opening a browser, logging into frame, creating a new project, uploading, and then sharing is going to take too much time compared to the current Share for Review feature. There is a comparison workflow video comparing the two side by side, attached.

0
RolandLBC
1 year ago
RolandLBC
RolandLBCParticipant
 Feature Requests

Share For Review button directly shares to Frame.ioOpen for Voting

Support for Photoshop, InDesign, and Illustrator files in the Frame.io ecosystem was announced at MAX 2024. It would be easier to take advantage of this new feature if there was an option in the Share for Review dialogue box to share to Frame.io instead of creating a generic share for review link.Adding Frame.io as a review tool for all creative workflows is a great idea that I would like to take advantage of with my team and stakeholders, but as it stands the process of getting a .psd, .indd, .ai file into frame.io by saving the file, then opening a browser, logging into frame, creating a new project, uploading, and then sharing is going to take too much time compared to the current Share for Review feature. There is a comparison workflow video comparing the two side by side, attached.

0
RolandLBC
1 year ago
DO NGOC CANHParticipant
 Feature Requests

the catalogue display should have a filter depend on which effects and color to user can understandOpen for Voting

I get confused to what effects or colors in firefly do so I have to prompt every single affect to know what doing what. It nice to have a more details and description for each of it.

4
1 year ago
georg fiedler
georg fiedlerParticipating Frequently
 Feature Requests

P: missing warning when selecting different printers in "page setup" and "printer settings"Open for Voting

in lighroom classic it turns out to be possible to select a different printer in the "page setup" vs. the "printer settings". and strangely enough, this does allow printing. but it can cause very unexpected errors, that are very difficult to track - in my case, i couldn't select the correct setting for the correct paper feed, because the two printers (Espon 3880 and R3000) have slightly different settings, which in most cases work fine but in some cases don't work. and all error messages only hint at wrong paper feed, but not at the fact that within lightroom two different printers are selected. a simple solution to this would be a simple warning, that there are different printers selected in "page setup" and in "printer setup". 

0
georg fiedler
1 year ago
Michael GrenadierLegend
 Feature Requests

always a good idea to regularly check to make sure autosave is working properlyOpen for Voting

Everyonce in a while, I find that autosave is not working properly...  probably a smart idea to check once a week to make sure...  I've got my autosave interval set to every 5 minutes...  and have the autosave folder saving to my media drive for the specific project....  I also have a folder on my startup drive for my premiere projects that is automatically mirrored on dropbox...  And since I pay for a dropbox plan, I can actually access a fair number of versions of the project file for the last month...  I'm that belt and suspenders kind of guy.   Gotta say, I use to see this problem occasionally in fcp1-7...  Don't remember if it ever happened back in early avid days in the 90's.  

0
1 year ago
morphinapg
morphinapgInspiring
 Feature Requests

Timewarp: Using "smart sharpen" techniques and provided shutter angle, remove/reduce motion blur.Open for Voting

Smart Sharpen in Photoshop proves that motion blur can potentially be at least partially removed, if you know the motion vector and pixel distance of the motion smearing.The timewarp effect already calculates motion vectors, and the shutter angle would then define how many pixels of motion would be expected to already be in the footage. Given these two ideas, you could potentially make it possible to remove/reduce motion blur in existing footage. This could either be done to improve clarity of footage, or it could also be used to make slow motion effects much more realistic.Obviously, results would vary, depending on the quality of the footage and the accuracy of the motion vector calculations, but this could potentially be a really cool effect. Understandably, such an effect would be slow to render.

0
morphinapg
1 year ago
Paul_Steyn2341Participant
 Feature Requests

Feature Request: Automated Skin Tone Detection and Correction ToolOpen for Voting

Hello Adobe Community,I would like to propose a feature that could significantly enhance the user experience in Adobe Premiere Pro and After Effects: an automated skin tone detection and correction tool.Description: This feature would automatically detect skin tones in video footage and adjust them to a predefined "base tone," regardless of the lighting conditions. This would streamline the editing process, allowing editors to achieve consistent and accurate skin tones with minimal manual adjustments.Why is this valuable? Many video editors face challenges with skin tone discrepancies due to varying lighting situations. By incorporating this tool, Adobe can enhance the editing workflow, reduce the time spent on color correction, and help maintain visual consistency across projects.Thank you for considering this suggestion! I look forward to hearing your thoughts and any feedback from the community.Best,Paul Steyn

0
1 year ago
AndrewTheGreat
AndrewTheGreatKnown Participant
 Feature Requests

Source monitor in a FullHD sequence crops 4K videosOpen for Voting

Don't know if it's a bug, or something not thought through, it accompanies Premiere Pro for ages and no one seems to care about it... I think it's time to.If you open a 4K footage in the Source monitor while in a 1920x1080 sequence, the source mon shows the video cropped.Steps to recreate:1) Create a FHD sequence:2) Import a 4k footage3) Drag it onto the timeline keeping the existing settings4) Doulbe-click on it on the timeline and see this:And here's what it should look like or does so when opened from the project bin:So the source monitor should show the videos the same way in all cases. I think this should be fixed.Premiere Pro 25 (or any), footage properties below (or - again - any 4K), 14700K, 4080, latest Studio drvs, Win11Don't know if it's important - Fit to screen is set as default scaling in the preferences.  Type: MPEG Movie File Size: 55,94 MB Image Size: 3840 x 2160 Frame Rate: 25,00 Total Duration: 00:00:31:16 Pixel Aspect Ratio: 1,0 Alpha: None Color Space: Rec. 709 Color Space Override: Off Input LUT: None Video Codec Type: MP4/MOV H.264 4:2:0   

4
1 year ago
dmnhsnParticipant
 Feature Requests

Extreme Compression in Share for ReviewOpen for Voting

I have this crazy idea where I think Adobe (a graphic-centric company) should refrain from compressing the living hell out of my "shared for review" uploads. I pay a premium for this service and I'm constantly having reassure clients that their images will look better when printed. Or, I have to send a screenshot in a separate manner to assure them it will look good. Share for review is a wonderful addition completely crippled by excessive compression to save server space. Give me a storage quota and let me manage my reviews. That will force users to remove old reviews and provide space for higher quality files. I mean, this post I am writing allows for maximum file size of 47mbs, yet they compress my review files down to kilobytes. It is clearly a matter of misaligned priorities.

0
1 year ago
ckSlevsParticipant
 Feature Requests

P: Facial recognition for petsOpen for Voting

Please add facial recognition capabilities for pets (dogs, cats, other animals) similar the way facial recognition works for people right now.

2
1 year ago
Mitzleplick8867
Mitzleplick8867Inspiring
 Feature Requests

Feature Request: Export transcript as an SRT fileOpen for Voting

I like transcribing in Premiere. The one thing I wish it had is the ability to Export the transcription as an SRT - without having to create captions. I don't need the captions as a track. I just need to create an SRT from the transcription. Most third party AI's will allow you to export a transcription as an SRT without creating a caption track.  That would be my suggestion.  (Note: Subject changed my moderator.)

20
Stan Jones
1 year ago
RathorianParticipant
 Feature Requests

Color PaletteOpen for Voting

In both Premiere Pro and After Effects in the new properities panel, it would be nice if there was some way to store and save (per project) hex numbers to recall when you need a specific color.

3
Kes Akalaonu
1 year ago
brucew65991919
brucew65991919Participating Frequently
 Feature Requests

LIKE OR FAVORITE THAT SERVES THE END USEROpen for Voting

PROVIDE A LIKE OR FAVORITE THAT SERVES THE END USER NOT for the people to know how much people like there stuff. No its a gallery of favorites that can be found so much easier vs having to scroll all over again if you go back to the gallery. Here I was clicking likes only to find they are for serving the creator which makes sense but from a sense of creating likes or favorties for me to go back to check out instead of having to go back Seems like a simple toggle would allow all my favorites to show up in once place while still provideing alghrithm for the creator! Understand what Im requesting?

1
droopydog500
1 year ago
Pete BauerParticipant
 Feature Requests

Previews for Edit> Stroke and Edit> FillOpen for Voting

I submitted this feature request about 20 years ago, so it seems like a good time to try again.Can we get preview for the Stroke and Fill commands? And with Stroke, how about a warning message if the Outside or Center option is selected and the stroke (or part thereof) will fall outside the current canvas?If we want to go whole-hog on Stroke, what about making it a Shape tool/.command? Perhaps with the option of what corners to use with Outside and Center when creating polygon strokes?

0
1 year ago
Eileen13Participant
 Feature Requests

Adobe Review Link - Comment mappingOpen for Voting

I think there should be a way to add mapping to a comment made if accidentally submitted without for example: pinning.Rather than having to start a new comment from pin. 

0
1 year ago
Show more posts

Filter by product

  • All products
Terms & ConditionsAccessibility statement
Using the community Terms of use Privacy Cookie preferences Do not sell or share my personal information ad choicesAdChoices