Lightroom Classic

On Tuesday I was using LRC v13.5 with no problems. On Wednesday I installed v13.5.1 and ever since then I have had intermittent moments when the screen flashes briefly a couple of times without me touching anything. I am using a dual monitor setup and twice when this happened the main display and the secondary monitor display of LRC switched monitors. I am using a MacBook Pro 2023, Apple M3 Max chip, 36 GB memory, Sonoma 14.6.1. Thanks in advance for any ideas.

Hi! My Lightroom Classic doesn't open anymore. I struggled the last couple of times when I wanted to use it as well ... deinstalled it, reinstalled it and that several times again (on both my work and my home PC). My colleage tried it with her PC as well, but said to me she can't work with this programme because it doesn't work ...  And today it doesn't open again ... I de + rereinstalled it again ... when deinstalling it, it first didn't let me, because there was a message, which said that I should close all open files (altough I didn't have any open ... for quite a long time). With the task manager I finally could close it and then managed to deinstall it. But now it still doesn't open. It was completely new installed ... I am not sure whether Adobe wants the people to use Lightroom instead of Lightroom Classic and that's the reason, why it doesn't even open ... However can anyone help me? I really urgently need a programme where I can add watermarks to

I have been using Lightroom 5 on an iMac with no problems.  I recently upgraded to a Mac Mini and I tried to reload Lightroom 5 from the DVD using a SuperDrive.  The installation seemed to go OK, but it never asked for my licensing code.  When I open Lightroom 5, the LR welcome screen comes on for a few seconds, then disappears and a very long trouble report is created.   Any workarounds?  I don't want to pay $10/month for a program I rarely use.  

I've just yesterday subscribed to Adobe after many years of avoiding it. Lightroom Classic quits on launch on my 2023 M2 Mac Mini. I've tried a few things like this: Reset Procedure:1. Close Lightroom.2. Hold down [Alt/Opt]+[Shift] while restarting Lightroom.3. Overwrite the Preferences when prompted by the dialog.4. Close Lightroom.5. Restart Lightroom.Clean Lightroom Install ProcedureClose LightroomRestart the computerUse the Adobe Creative Cloud App to uninstall LightroomRestart the computerInstall Lightroom via the Creative Cloud App without launching any other programs.Restart the computerLaunch LightroomWait 5 minutes I also tried to follow some instructions on disk access permissions - not sure if that worked. I'm not sure what to try now. I'm using the latest versions of the OS and the application. 

ich habe 4500 Fotos importiert und diese in 20 verschiedene Sammlungen verteilt. Da die automatische Synchronisierung der einzelnen Sammlungen angestellt war, hat LRC versucht diese 4500 Fotos alle zu synchronisieren. Es wurden ca. 200 Fotos synchronisiert (nicht in die Cloud, sondern nur mit Ligthroom mobile)  und seitdem hängt sich LRC immer auf. Ich habe die Synchronisation all dieser betroffenen Sammlungen angehalten und trotzdem wird immer wieder versucht alle 4300 Fotos zu synchronisieren. Trotz Neustart und und und ....was kann ich tun???   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for any problem with software!]

Hi Everyone,   I use Lightroom Classic, latest iteration, on my Mac computer. For some time I've been having an annoying problem with Keyword sets. I've set up a number of these. On occasion I want to add a keyword to an existing set, so I follow the normal procedure (which has worked in the past). That is, I go to 'edit set', I enter the new keyword (one from my existing general list), then I click 'Change'. The new keyword appears in the set, and it will work for the rest of my Lightroom session. Whenever I next open Lightroom, that new keyword will have disappeared from the Keyword set. This has happened many, many times now, and it's extremely annoying. I cannot for the life of me see what if anything I'm doing wrong.   Has this happened to anyone else, and if so, have you fixed it?   Thank you in advance to anyone who can help.   Nick.

I have 1 keyword that is followed by a + (plus sign). What does this indicate?

I began having stability issues with LRc 13.5 and more with 13.5.1My motherboard is an ASUS ProArt B660 creator-D4 and I run an Intel i5-13600K processor plus an ASUS ProArt GeForce RTX 4060 Ti OC edition 16GB GDDR6 (which has an NVIDIA RTX 4060 Ti). After updating BIOS from ASUS and latest creative driver from NVIDIA I still had issues. I ran the Intel Processor Diagnostic Tool 64bit and it returned a fail at the 'Prime number' test.Don't ask me what it all means but the solution they suggest is resetting the BIOS to the default settings. The BIOS on my PC during me building it based on advice was to enable XMP and Intel driven performance enhancments. (XMP meant my 4 x 16GB DDR4 RAM would run at the 3600MHz rating instead of the BIOS default of 2133 MHz) After restoring the BIOS to factory defaults and keeping the RAM at the default 2133 MHz my system appears stable and I haven't suffered from a LRc induced freeze or windows blue screen.  I only had stibility

Bonsoir, Je suis désolé d'avance pour cette question mais je m'y perds...Voilà je me sers de Lightroom Classic et depuis quelques temps de Lightroom CC.  J'avais coupé la synchronisation de Classic depuis un moment et là je voudrais synchroniser les deux... Bref je me demande ce qu'il se passe quand on a retouché certaines photos sous Classic et d'autres sous CC (avec un iPad par exemple) lorsqu'on synchronise les deux alors que les photos brutes sont dans le Cloud et pas le disque dur du Mac (dont le disque commence à faiblir niveau espace) ? Puis-je retoucher des photos synchronisées indifféremment entre Classic et CC et avoir le résultat sur les deux applicatifs identique ? J'espère être clair... Merci d'avance pour vos retours

Lightroom Classic 13.2Windows 10 ProVersion 22H2Build 19045.4046Every time I click to make a mask (K, M, etc) the normal module opens up in the top right, the second I click however it deletes the new mask and any other masks that already exist (which can be added to the picture only via presets). This also begins the "Detecting People ..." dialogue again.To add insult to injury, returning Lightroom to either of the most recent previous versions results in an "assertion failed" error which does not resolve by following the instructions outlined on the adobe help post about the error.Any assistance would be greatly appreciated.

Repetitive task and automation question for Lightroom classic. i have the following repetitive task. 1) import files2) stack by capture time3) hdr merge 4) apply preset5) adjust exposure level 6) small adjustments 7) export is any part of this able to be automated?  

Hello,I need to set the same color to an object in different photos.How can I copy and paste Point color reference between masks in different photos?If it cannot be done with Point color can this be done another way in LrC?It would be very helpful to have the RGB numbers in Point color.RegardsFabio

I have a small problem.  In lightroom classic MetaData I enable the Creator field and type my name. I want any pictures I provide to my company to be tagged.  However, when I look at the metadata on the file, it says Content Creator: Created by Adobe Photoshop Lightroom Classic 13.5 (Macintosh). I don't see a Creator field when I look at file properties.  So I am not sure how I can get my name tagged on my pictures. Can anyone help me to understand how to do it properly in Lightroom Classic?

Hello! My Lightroom catalog is a hot mess, and I'm hoping someone can guide me through fixing it.  I've used Lightroom for many years, and my catalog holds over 45,000 raw photo files. I used to switch between editing on two different Macs, so I used this Dropbox storage method successfully for years—https://medium.com/t-brian-jones-fine-art-photography/using-lightroom-cc-classic-with-dropbox-for-a-great-cloud-experience-a428bd0f7bdd Now, my library is a disaster. I need to fix it and then transfer it all to my new MacBook Pro, which will be my only computer moving forward. If I must use an external hard drive rather than Dropbox for storage, so be it.  In my Lightroom, I can access 7,615 synced photographs just fine. However, older photos (the bulk of my library) all appear gray with an exclamation point in the corner. When I click on the exclamation point, I receive the following warning: Lightroom has encountered problems reading this photo. You will not be

Bonjour, J'utilise plusieurs catalogue pour différencier mes catégories de photos (Surf, Mariage, Shooting) et des fois ça m'arrive de devoir importer des photos à partir d'un autre catalogue. Mais depuis quelques temps quans je veux faire cette option, j'ai des problèmes. 1. La fenêtre qui s'ouvre n'est pas du tout pratique car on ne voit pas le chemin entier des dossiers depuis lesquels on veut importer les photos et il ne sont pas classés dans l'ordre de mon DD. 2. Je ne peux même plus avoir les aperçus des photos que je veux importer quand je clique sur un dossier3. J'ai carrément des dossiers qui n'apparaissent pas alors qu'ils sont bien dans le catalogue en question...SI vous avez des idées je suis preneur svp. Car du coup je suis obligé de devoir re importer les photos de mon DD au catalogue voulu, sans pouvoir passer par cette option, et donc de devoir refaire toute le post traitement déjà fait sur les photos que je veux changer de catalogue. Merci &#12

Hi, some of the folders in my external HD do not show in LR classic. I go to the HD and they are all there, but the folders dont show in the Library navigator. No idea on why. Its not the "I have a photos showing missing in grid" that needs to be linked. Its just not showing entire folders in menu.  Have looked a a bunch of threads on here., dont see the answer.  Any thoughts on what I am doing wrong? 

Hello! I tried already to disable the GPU in preferences, worked for 30 minutes, now it is not working again. Tried restarting, turning off, all the basics. Anybody else had this problem recently? What can I do to make it work? I have mac m1 pro and the newest version of LR. 

Lightroom Version Number   6.1.4 Operating System    Windows 102 questions ...I have a perpetual license for 6.1.4 on W10 PC I have a new W11 PC and in the process of reinstalling all my appsWhere can I find my license key on my installed ver ? 2nd QDoes anyone host a copy of 6.1.4 install file anywhere?

Not specifically LR, but as my DNG photo are all for LR, there may be someone here who knows how to resolve the problem.Windows 10 and LR Lightroom version: 6.14 [ 1149743 ] If I go to a Windows 10 folder - all of the jpeg files with have a thumbnail  (as do png, tiff etc)Very few DNG files will have a thumbnail (usually none)I have installed Microsoft raw image Extension .... v3 no differenceHave followed the steps to kill thumbnail cache, delete it, and restart explorer ... all jpeg thumbnails rebuild (slowly) but not DNG.Have also followed the tip to uncheck 'always shows icons, never thumbnails'The advice is to click on teh top button 'apply to folders'  but I can't do that as that is greyed out.  (pic attached)   

This is such an elementary question but.... Can I filter ONLY color images? And/or filter ONLY black-and-white images that I've edited? Tp be clear, not talking about color "labels" like applying the red filter etc. My own images that I've left color, versus images that I've added a black and white edit to.I have a client looking to order a round up of ONLY the color images I provided them, but there are thousands of images - so I'm hoping there's a way to filter OUT any black and white treated images that I've edited from my catalogue, to view only my color images. 

Why are there now hundreds of thousands more files in my preview folder? Some (but not all?) preview files (.lrprev) have associated files that seem to be different sizes of previews. They haven't been there in the past. What has changed? Bob Frost

Hello, I have come back from vacation and want to edit my photos in LcR. It no longer starts up . All I see is a blue wheel turning and it stops after a few seconds. I have version 13.5.1 What should I do? Can anyone help me.

 After I sync a Collection, when I click Make Public (so that I can then view them on the web and share the photos with others), it scrolls forever without actually providing a link. Until very recently, I had never had this issue. I'm not doing anything differently than I did before, so I just don't know what is causing this problem.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for any problem with software!]

Olá, estou tentando usar a seguinte configuração na hora de exportar as fotos do catalogo... em LOCAL DA EXPORTAÇÃO está com as seguintes configurações: Exportar para: Mesma pasta da foto originalArquivos existentes: sobrescrever SEM AVISARPorém ele não faz o que pedi para fazer... salvar o arquivo na mesma pasta e sobrescrever ele...Ele dá um erro falando que o destino da foto substituiria a foto existente.....Mas não foi exatamente isso que pedi para fazer? Na mesma pasta da foto original e sobrescrever sem avisar.   Porque preciso fazer isso?... tenho que importar as fotos de produtos para um novo sistema e neste sistema para que funcione a importação das fotos eu precisei criar uma pasta onde o nome da pasta é o ID do produto. e todas as fotos já estão organizadas assim, apenas gostaria de tratar a qualidade delas que no momento está muito alta.   {Moved from Lightroom Cloud to Lightroom Classic Forum by Moderator} 

Using LR (13.5.2) and PS (25.12.0) WIN11. When "save a copy" back to LR the images do not update. Yet, if I look in Explorer, or  open that image again in PS, updates are there.  I have reset LR several times, and it does not help.  This will happen to any image I try it on, so it is not just one image.  Ideas? Thanks.