Lightroom Classic

Lightroom CC : Pourquoi lorsque je fais un masque pour un éclairage d'apoint (pinceau, dégradé linéaire...) c'est la photo toute entière qui change d’éclairage et non pas la partie sélecitionnée ? 

See: https://community.adobe.com/t5/camera-raw-ideas/camera-raw-tone-curve-as-local-adjustment/idi-p/12221231   Local adjustments in Camera Raw now feature Tone Curves as one of the settings. If you want to try out the Tone Cover as a Local Adjustment check out the latest updates from Camera Raw.     

For whatever reason attempting to Ai Denoise in PS or importing a lot of files to LrC makes the software crash. The computer itself stays running. If i relaunch LrC it appears to have imported *some* files but not many. All drivers are up to date. Windows is up to date. Full Adobe suite is up to date. I've even attempted uninstalling and reinstalling PS. System is an i9 14900k, 192gb ddr5, asus 4090. Crash logs submitted when it allows me to. Sometimes it crashes without a prompt for submission.

Quando estou na aba Revelação do Lightroom para tratar as fotos, as fotos não aparecem onde deveria, fica em uma "janela" que sobrepõe parte da tela e que é muito pequena tornando o trabalho inviável. 

Hello. I updated to LR 12 classic this morning. After it converted my catalog, it crashed stating that the catalog was corrupt. It then repaired it. It then crashed again, stating that the catalog was corrupt.   The first corrupt catalog is 1.6GB. The second is 1.2GB.   It then repaired it again. This final catalog is 300MB and contains zero history. The photos are in their last edited state, but I can not go back to previous steps nor copy settings to another file.

Since upgrading to Lightroom Classic 13.3, the performance has become extremely slow. Various operations have become very slow; for example, it takes about a minute to move to the Develop module or to move between images in the Develop module. There were no issues when using Lightroom Classic 13.2. Is there anyone else experiencing a similar issue? I have about 200,000 images in my catalog, so that might be one of the reasons, but since it was working fine with version 13.2, I suspect that there might be some degradation associated with upgrading to 13.3. CPU:AMD Ryzen 9 5900X GPU:GeForce RTX 4070 Ti RAM:64GB storage:2TB SSD x2 (15GB+ available for each drive) Below is the system information: Lightroom Classic version: 13.3 [ 202405092057-40441e28 ] License: Creative Cloud Language setting: en Operating system: Windows 10 - Business Edition Version: 10.0.19045 Application architecture: x64 System architecture: x64 Logical processor count: 24 Processor speed: 3.6GHz SqLite Version:

Hallo, Ich habe das Problem, dass Lightroom Classic Version 13.4 (Camera RAW Version 16.4) beim KI Entrauschen von .arw Dateien (Sony) mit unbekannter Fehler abstürzt ( Screenshot.png) bzw., dass ich KI Entrauschen auf .arw Dateien nicht anwenden kann. Es wird auch kein Vorschaubild erstellt (Screenshot2.png). Mit .raf (Fuji) hat das KI Entrauschen hingegen kein Problem.  Ich benutze einen Windows 10 Rechner Kann mir jemand bei der Behebung des Fehlers helfen? Danke schonmal Enrico

Bonjour, je me permets de vous contacter. J'ai déplacé l'ensemble des éléments du catalogue de mon disque dur de mon Mac vers un  cloud j'ai bien cliqué sur le fichier qui permet d'ouvrir le catalogue lorsque celui-ci était dans le cloud et cela n'a pas permis de démarrer Lightroom, j'ai de nouveau réessayer d'ouvrir le même catalogue qui était encore stocké sur le MAC et la impossible de lancer l'application. J'ai fini par désinstaller LrC pour réinstaller de nouveau LrC, mais le phénomène persiste et je ne suis plus dans la capacité de pouvoir réouvrir mon Lightroom Classic sur le Mac. J'ai réessayé avec d'autres catalogues qui se situe sur un disque dur externe, et j'ai le même problème. Merci par avance pour votre aide Bien cordialement Michel

Hello,I have an issue when copying a preset to other photos. When I edit the colors on one photo and try to copy the color profile to the remaining photos, the colors on the other photos get distorted and do not match the same style. However, if I copy the photo using the LOUPEDECK device, it works fine. Can you please help me understand what the problem might be?

Hi everybody, after Update of LR Classic and catalog cannot fisnish syncronaization. I have 60k pictures an the cloud, the sync error is not new. Usually I see in the Settings "Lightroom Synchronization" the sync process with file names. In the new version it showes nothing. I do not know wich file I  can remove and reimport. If I press option button (MacBook) and click on the item "show in the web", Safari opened LR in the web and show message 2 errors" Could you please explain how to trobleshoot in this case? BR, Leo

Hello!I have Adobe Lightroom Classic CC, and I have no problems synchronizing photos to their web service as albums. I have no problems adding one of those albums from  Lightroom to Adobe Portfolio. My problem is how to keep my Portfolio synchronized with my Adobe album. When I add an album to my portfolio it is fine, all the photos are there. When I add new photos to the album from Lightroom the next day, the new photos don't show up in my Portfolio.How can I make sure they are always in sync?

Using the most up to date version of lightroom, I have been having touble opening a catalog on an external drive for some time.  I have tried many things, including buying a new external drive, swiching between windows and mac os etc.. normally the catalog would open after 1-2 tries, but now it wont open after more than 3 attempts.  Lightroom keeps loading, appear stuck on something and evetually crash.  The problem got worse after the most recent update that upgarding the catalog.  I am fairly sure it was due to the catalog but how to trouble shoot furhter?   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for any problem with software!]

Hello there ! I'm trying to figure out how NOT to make a virtual copies of my pics in Lightroom CC, but how to create INDEPENDENT (and renamed) DUPLICATES of photos I could than treat as independent originals - as if they were different pics altogether. Until now, the only step I achieved is creating virtual copies of a photograph, but these copies are attached to the original, and that's not what I want (Am I being clear ?) Any ideas ? Cheers ! Poly  

Hi all, In Lightroom Classic, I have a Raw Default configured for my iPhone 15 Pro Max. It's a preset that applies Lens + CA Correction and enables HDR output (please see attached screenshot). For reasons that are unclear to me, Lightroom Classic does not apply this profile to ProRAW DNG files from my iPhone 15 Pro Max on import. For example, when switching to the Develop module on a freshly imported iPhone 15 Pro Max DNG, nothing in the Lens Corrections panel is enabled, and HDR output is off (please see attached screenshot). Have I misconfigured something? Is there a bug? Kind of stumped.

When raw defaults are set to use a preset with HDR Mode: On, HDR mode doesn't get enabled for imported photos or when you reset the photos. But when you use the same preset as an import preset in Apply During Import, HDR mode gets properly set.   To reproduce on LR 13.4 / Mac OS 14.5:   1. Download and open this catalog: https://www.dropbox.com/s/zn2kykbodkwbtgo/HDR-raw-defaults-bug.2024.07.20.zip?dl=0   2. Import the preset HDR.xmp from the catalog folder. It sets Exposure = -1 and HDR.   3. Set Preferences > Presets > Global to the preset HDR. Uncheck Override Global Setting For Specific Cameras.   4. Right-click the subfolder "photos" and do Synchronize Folder, with the option Show Import Dialog Before Importing.   5. Click the import option Add and import the three photos.   6. Take each photo into Develop and observe that Exposure = -1 (correct) but HDR is not highlighted (incorrect). Click Reset and observe that HDR is still not highlighte

The behavior of "Sync another catalog" has dramatically changed recently (not sure when, but perhaps when the new sync architecture was introduced) and the new bavior has 4 major problems - I hope these are not "as designed" features. My observations and testing of this was done on July 22 and July 23, 2024 using Window/10 with LrC 13.3.1 and LR 7.4.1 This information is related to syncing a new catalog. It does not apply to changing the sync catalog to one that is a copy, backup or an upgrade of the currently synced catalog. Rather it applies to changing the sync catalog to a catalog, or copies of a catalog, that did not get its start from the currently synced catalog and this includes the scenario of creating a new catalog and then importing to it from the currently synced catalog. 1) All images from LR/Cloud are added to the LrC catalog and are placed in the Xfer Folder in the LrC Folders Panel (this the folder designated in the "Lightroom Sync" tab of the "Preference

I have been using Lightroom classic for years. reacently I started looking into its slideshow capabilities. I have created a collection of around 80 photos. When I press Preview or Play it goes through preparing the slides. It is a very slow process. I left it and went to dinner and came back after 3 hours and it was only at Slide 25. I started the process multiple times, rebooted Lightroom, rebooted my iMac, ... Same process. Takes hours to prepare the slides. I have yet to complete one slideshow.   Any idea what might be happening?

This is my last attempt to solve this before I do a clean install on Windows 10 (fingers crossed)My hardware: Intel i7 7700k - 32gb DDR4 3600Mhz - Nvidia Geforce 1050 2GB RAM - Samsung nmve 500GB for SO and Crucial P3 Plus for Catalog and caches.SO: Windows 10 v22H2 64bit, which I did a fresh install yesterday, keeping programs and data (not formatting).Graphic card: Nvidia Studio drivers, clean install yesterday with last version (16 of July-24)Lightroom Classis v13.4 and everything up to date.I know the hardware is little old but I'm sure is good enough to run Lr Classic smooth, as it did for a while.PROBLEM: I don't remember when this happened but was a while ago, Develop module went terribly slow, and the brush was impossible to use with 5 to 10 seconds of lag sometimes. I had to turn off the Graphic Processor and it improved a little bit (before this, graphic processor was on and everything was fine), no lag anymore but overall it feels slow, I click on the crop tool and it takes

First time poster, Recently my Lightroom Classic shuts down everytime my iMac (2019, macOS Sonoma 14.5) screen locks.  Is there any Apple setting that is causing this is this a Lightroom issue?  Please advise. Also note that it does not appear to be a crash since I do not get any prompts to submit a crash report. Thanks in advance,

I've got a catalog wth 500 images that I have pulaced into a custom order/arrangement. Is there any way to save this particular ordering? I want, for example, to resort the view based on a few things, such as file type of Added order, then return to the ordering I've created. Would a Smart Collection save the order, for example? (I don't want to try it to find out ;-)) Thanks for any help.

When I go to LRC (version 13.3) to import my raw images (shooting Nikon z8 in Raw HE, Prograde CF Express B 325GB Cobalt card, and Prograde CF Express and SD UHS II card reader PG 05.5) many but not all of the images are listed as "Preview unavailable for this file" Yet every image box is listed as nef. Operatings system is Wiondows 11.Has anyone encountered this before and if so any suggested remedies would be greatly appreciated. Bruce

Hi, community!  I am shooting photos with a Fujifilm/XT5 and having trouble importing the images to Lightroom Classic 6. I already checked that it´s updated -as updated as it can be. The Adobe agent told me they are not trained on this cause the product is not available now, and suggested I come to the Forums to see if someone knows about this.  Also, I tried the Cloud service last weekend and I wouldn´t say I liked it. It crashed all the time on my mobile.  

I have experienced instances with four albums now where some actions done to pics in LR Mobile on my iPad are not fully synced back to Lightroom Classic.  Here's the workflow and what has happened: 1) Pics initially imported from D850 to Lightroom Classic.2) Collections created in LR Classic and set to sync to Lightroom.3) Albums with all pics appear on iPad in LR as they should (as well as iPhone, cloud etc.).4) Albums are reviewed on iPad with certain pics flagged and/or star rated.5) LR iPad, LR iPhone, LR desktop (not Classic, the other one) and lightroom.adobe.com are all perfectly in sync right down to the pick, ratings, etc.5) The problem is that some of the flags and ratings changes properly sync back to Classic and some do not.  I can't really see a pattern.  Edits however done in LR mobile appear to sync but I only tested a few. This is a huge problem because now Classic is out of sync with the client's selection made on the iPad.  I do this a lo

Hi,I the main folder is not showing how many pictures are in the main folders.Like Lightroom Fotos 2023 0submap 01 0 submap 01/09 26How does this hapen can be resolved?   

I have recently had an issue with some of my RAW files where after the denoise process has completed, with the AI denoise, it says that there has been an unknown error with the file. However, this only happens with some files and not others but they are all CRaw files. I am on Windows and version 13 of lightroom. Some help would be much appreciated.