Lightroom Classic

Images failing to display when importing.  I am importing from a folder on an internial drive, images do not display, close and reopen lightroom images are displaying, but image counter is showing zero.  When i delete all the images counter is showing a negative number.  System Specs: Lightroom Classic version: 13.3.1 [ 202405311538-6d7c0308 ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.22631Application architecture: x64System architecture: x64Logical processor count: 12Processor speed: 4.2GHzSqLite Version: 3.36.0CPU Utilisation: 1.0%Power Source: Plugged In, 255% Built-in memory: 32674.1 MBDedicated GPU memory used by Lightroom: 18.2MB / 8135.8MB (0%)Real memory available to Lightroom: 32674.1 MBReal memory used by Lightroom: 711.8 MB (2.1%)Virtual memory used by Lightroom: 844.7 MBGDI objects count: 674USER objects count: 2347Process handles count: 2433Memory cache size: 0.0MBInternal Camera Raw

Wie kann ich die Personenindizierung in Lightroom 13.3.1 stoppen?

When I crop photos, I would like to maintain a minimum number of pixels in the crop.  If the crop tool allowed the setting of either the long edge or short edge number of pixels, the would significantly increase my workflow speed.  Currently, I look at the cropped image size and try to get it as close to the number I'm looking for.  Ideally the box would stop at the minimum and not get any smaller.

Hello! Sometime in the past couple months I reset all edits on nearly my entire library of 200,000 photos without realizing it! Apparently there is a shortcut keystroke to reset settings or something and I must have selected all (or nearly all) somehow and hit that keystroke. I need to find all photos that have "Reset Settings" applied to them. I tried using search and tried filters but nothing seems to find this "Reset Settings" edit. How can I find all photos that have been reset? I've lost a huge amount of work and I'm hoping to not have to go through each photo one by one since only about 95% have been affected by this. I'd prefer to find ones that actually had edits and were reset if possible. Any help is appreciated! Cheers!TJ

Het importeren van foto's in LrC duurt erg lang. Wat kan de oorzaak zijn, of moet ik bepaalde instellingen wijzigen?

Hi Folks - hoping I can find a solution...I've gone through several posts...this seems a unique problem. Situation: replacing my old iMac 2017 with a new iMac 24.On old iMac I had photo library on a RAID system with catalogue on internal HD. I want to move catalogue to the external HD (RAID)...following online advice on how to do that. I tested LRC on my old iMac to endure it would open successfully on the old iMac, from the new catalogue file location (on same external HD system) - which it did successfully. When I connect the external HD to new iMac I launched the catalogue file from the external HD and get this error message. So how do I change 'folder permissions'??? I did go into Sys Preferences and LRC is checked off to allow access under Security & Privacy. As an aside, I know it's not ideal to have catalogue off of the internal HD but it can be done...I have to this point managed my catalogue of ~50, 000 images as one... Any help much appreciated...hope

I need help! I'm doing a large event edit -- everything was going fine, edited a bunch yesterday successfully, and now today when I try to copy/paste edits, batch edit, etc, this error message will pop up "could not update AI settings for (however many) photos". I've tried updating LRC, restarting computer, working on even just 2 pictures, nothing works.    [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for a problem with software.]

Dear Adobe Team,In order to prevent your long time customers from moving to other software company alternatives (as I will be doing), I would recommend that you at least allow users who have purchased your products (Example: Lightroom 6 - CD Version) to install and utilize them for as long as they wish (as is the case with all the other software I have ever purchased on CD/disk), rather than trying to push them into a subscription-based model without any prior knowledge. Extremely disappointed and dissatisfied with Adobe and will not be purchasing or using any Adobe Software products moving forward.Cheers,Jordan

Bonjour, je me suis abonné à lightroom + lightroom classic depuis hier, Lightroom est connecté à internet mais je n'arrive pas à établir la connection internet en haut à droite dans lightroom classic pour pouvoir télécharger les presets (préréglages) de développement ( je peux voir le rendu mais impossible de les télécharger) je suis pourtant connecté à créative cloud desktop. Est-ce que quelqu'un pourrait m'aider?   Merci   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for a problem with software.]

Lightroom Classic version: 13.3.1 [ 202405311538-6d7c0308 ] Camera Raw version: 16.3.1 Windows 11 When using the masking tool in Lightroom Classic or Camera Raw the application chrashes and shuts down.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for a problem with software.]

Every time I try to delete a photo in LR Classic, the only option I'm give is to "Remove." This happens regardless of how I attempt to delete (through the photo menu, backspacing, hitting delete, etc.).  Any help would be appreciated.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for a problem with software.]

There is no option to reset new mask slides automatically. Where could it be?? It always did it with earlier versions. Manual reset really slows down the development process.   [Mod: Reformatting post and branched from an older thread referring to a different topic]

How do I gmail a photo on Light room?   [Mod: Moved to the Lightroom Classic forum]

I've been using Lightroom Classic for many years so am pretty familiar with how it works, but I am beside myself with frustration today. Though I do use LR mobile and desktop for much of my workflow, I depend upon many of the features in LR Classic that aren't available in the other apps.    I'm using LR Classic version 12.2.1 on Windows 11.  Last week it stopped launching.  Task Manger shows it running as a background process, but the app doesn't launch.  After following suggustions found in other threads and trying them ALL, the only thing I've found to work consistenly is to open a new windows user account.  It works the first time, but it still refuses to open again after that initial launch.  This is obviously not a managable solution.  Any and all help is appreciated.    Device Specs: Device name LH-PersonalDellLaptopProcessor Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz 2.59 GHzInstalled RAM 16.0 GB (15.7 GB usable)Device ID EF33E430

I have been trying to use the Denoise without one single success.  My Macbook has 16MB of RAM and is up to that (running Big Sur 11.7.6). It will continualklycrash before completing even 20% of the DNG generation process andf the crash takes one of three forms.....1) Lightroom only crashes.2) all programmes crash but my comnputer does not crash.3) my computer crashes and I get computer generated warning of the crash. I have cleaned up my computer, removed unneccessary apps, cleaned out the cache, reloaded Lightroom Classic, run only LRC with all other programmes closed and still no success.........! I am now running the 30 day trial period of DxO Pure Raw 3 which if I cannot solve this problem will cost me USD129. DxO takes no more than 2 minutes to complete the noise reduction with a 100% success rate.  Needless to say, I do not want to spend USD129 when I already have a LRC subscription.  Please help to solve this problem. 

I have had a WD ex2 Ultra mycloud set up on my home network in Raid 1 configuration. My 6 TB Drives fill so a purchased 2) 12 TB drives. I used my Trip-litew dual dock w/cloning to clone my 1st 6 TB drive to my 1st 12 TB drive. I then cloned the 1st 12 to the 2nd.  I have now returned the 1 & 2 12 TB drive to my Western Digital My Cloud EX2 Ultra housing and connected to my netwwork. The connection fails. Any help with this and I suspect when connected I will not be able to see these in LightRoom.What do I do, create catalog and import (will this take age) Clueless here, I do need direction.Thanks,John

Hello,I have issues setting up LR to send pictures from my gmail. Le email address and password is correct but yet LR wouldnt validate the process and I cannot send pictures.Does someone have any ideas?

Issue: In the Develop module, when using "Set as reference photo" in HDR mode, the image displays in HDR instead of SDR despite the "Preview for SDR display" being checked, making the comparison ineffective. This occurs whether the "Soft Proof" option is selected or not.Provide Lightroom Classic version: Lightroom Classic version 13.3 [202405092057-40441e28]Provide OS and version: macOS Monterey v. 12.6.8Issue:Steps to reproduce the behavior:Open Lightroom Classic and go to the Develop module.In the Basic panel, enable the HDR toggle.Ensure "Preview for SDR display" is checked.Select a photo (HDR, Standard preview, etc.).Right-click and select "Set as reference photo".Click the "Reference view" button to open the reference photo.Test both scenarios: with "Soft Proof" selected and with "Soft Proof" not selected.Expected result: The reference photo should be displayed in SDR mode as per the "Preview for SDR display" setting, regardless of whether "Soft Proof" is selected or not.Actual re

Adobe Classic \ updated | Win10The auto masking search for people sometimes takes a minute, but sometimes it crashes the computer too.The support told me I can't configure it to stop guessing my wish and the auto search is the only default. Why are Adobe's engineers (again) forcing me to waste valuable time to watch the antics of their artificial intelligence that doesn't impress me at all?Why the system resource management is so bad that when LR crashes, my Win freezes and nothing works including the task manager - and I have to hard reboot my PC?6 times in one day I've sent Adobe error report- for what?Why do the engineers assume their customers will continue paying for products that delay the creative process from a corporation that doesn't care about the clients?Listen to what Mike Gastin says in his latest YouTube vid before the landslide. I won't stay in this ecosystem for long too. 

Since yesterday I have encountered a problem with the sync function with adobe cloud on Lightroom Classic 12.1, with the message "trying to connect with server" when I click on the cloud storage icon.I have never had issues with the cloud before and it just lost connection all of a sudden. Can anyone shed some light on this problem? I am on windows 10 and I have tried restarting LrC and rebooting numerous times without success, any help is appreciated thanks!

When I go into Develop Mode in Lightroom Classic with some photos, I get a messageI that says, "This file connot be located" . My files are in an external hard drive. All has been working fine, with non changes that I'm aware of. Anyone have any thoughts about finding the images? Thanks!

1. Lightroom 13.3.1.2. Windows 11, 3. Use any supported tool for the first time.  A tip for a tool that you haven't used before opens (yeah!).  Unfortunately if you switch to another window, for example your browser to pause video you are watching so you can read, the tip disappears.  This happens when Lightroom loses focus. 4. I would expect the popup to remain visible until I click the button to dismiss. This is so annoying!  It would be really cool to have actually seen what the tip said.  As an asside from my complaining, is there a way to reset tooltips?

Hi all. Please help, I have tried everything..... When I open LRC it now takes between 5 and 10 minutes to load (Windows 11 pc). Once loaded LRC is fine and I can edit etc.I ran Norton antivirus clean-up on my C: drive yesterday, and assume it removed a critical file that impacts the time that LRC takes to loads. I restored a catolog backup of LRC, disabled all plug-ins, uninstalled LRC and re-installed but it still takes forever to load. I have enough RAM and Disk space on my PC and external drive (where images are kept), because I was running /loading) LRC with no issues yesterday prior to Norton clean-up. I disabled Norton. Disabled Graphic processor.  Ran Optimize catalog. Reset my pc many times.  None of these steps solved my issue.Anyone have ideas? (LRC v 13.3.1 RAW 16.3.1)

Hi everyone, I  have an interesting problem when editing in Lightroom Classic. In RAW the image looks perfect, once processed the result has interesting circular lines in the background. I try many things and nothing seems to work. Finally decide to use Digital Photo Professional by Canon (first photo attached) on the same computer I use with Lightroom and the photo was very nice. So, for sure the problem is Lightroom Classic. (second photo) I use version 13-3 and also update to the latest version with the same result. Any help will be appreciated!!Gustavo. 

Bonjour. Je cherche le manuel d'utilisateur en pdf