Lightroom Classic

Estoy teniendo un problema a la hora de revelar fotografias. Y es que resulta que mientras revelo las fotografias y pienso que ya están listas estas fotografías, resulta que las imagenes exportadas están mucho mas oscuras que lo que yo veia en la previsualizacion.  Recien se acaba de actualizar el controlado de mi tarjeta gráfica, ya reinicie la PC, ya reinstalé Lightroom  y el problema me persiste. 

Hello, is anyone else experiencing long time to denoise in lightroom classic?

Latest release is painfully slow with even the first mask requested.  This is now worse than prior releases.  Whether GPU is enabled or not makes no difference. Even the pins and lines for linear and radial masks when never hidden can be hidden. ----- System info below: Lightroom Classic version: 13.5.1 [ 202408271704-d15d09cd ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.22631Application architecture: x64System architecture: x64Logical processor count: 12Processor speed: 3.6GHzSqLite Version: 3.36.0CPU Utilisation: 1.0%Power Source: Plugged InBuilt-in memory: 65480.1 MBDedicated GPU memory used by Lightroom: 6523.1MB / 8017.0MB (81%)Real memory available to Lightroom: 65480.1 MBReal memory used by Lightroom: 8064.9 MB (12.3%)Virtual memory used by Lightroom: 15518.3 MBGDI objects count: 1292USER objects count: 3005Process handles count: 5189Memory cache size: 5113.2MBInternal Camera Raw version: 16.5 [ 1954 ]Maximum

I Recently move to a new PC running windows 11. After getting everything moved over, I went to exit LRC. At this point, I did not get a window asking if I wanted to back up the Catalog. I went to the Exit dropdown expecting to find Catalog Settings, but Catalog Settings is not there. I did some research and tried to do a Reset but that did not work. Any thoughts on where the Catalog Settings option is hiding?

During LR startup I get a Server Busy Window that says This action cannot be completed because the other program is busy. Choose switch to to activate the busy program and correct the problem. This does correct the problem but why is this necessary and how to I get rid of the error during start up?

Ich habe heut das Excire Search als upgrade gekauft. Das Panel wird nicht gestartet. Ich bekomme folgende Fehlermeldung: Das Excire Search Panel konnte aufgrund von Einschränkungen in Ihrer Lightroom Classic Version nicht gestartet werden. Bitte starten Sie es manuell.Wenn ich es manuell starten will, kommt ebenfalls diese Fehlermelung. Gleichzeitig öffnet sich der Finder und mir wird das Icon für das Panel angezeigt, so dass ich es außerhalb von Lightroom öffnen kann. Bei DXO PureRaw ist es ähnlich. Es startet die Übertragung nicht von Lightroom aus. Schließe ich lightroom, öffnet sich PureRaw, arbeitet die Aufgabe ab, startet dann automatisch Lightroom und importiert die Bilder.Ich hoffe, dass mir jemand helfen würde. Herzlichen Dank vorab, Ines

Hi,Now that RAW Details and Denoise is in the main side bar rather than the drop down menu, I thought how do you select multiple photos to denoise together?  I then saw you can now apply these functions as part of Synch Settings, so think thats way to do it (even if a bit awkward having ot delsect all optiuons then click RAWDetails and DeNoise).     BUT, does the Synch Settings perform a seperate RAW Details and Noise Analysis for EACH photo seperately, OR does it simply apply the "adjustments" it determined from the photo you did first?

I thin k that Adobe does it on purpose: one upgrade is om the other one introduces performace issues.I have a powerful PC: 13 13700, 64GB RAB, RTX 4070 12GB VRAM, two very fast SSD.before upgrafing to 14.5 all was running smmoth and nice, after 14.5.x installation all has become sluggish at UI and performance level: moving from one picture to the next, zoomin in/out, selecting with an object mask, exporting... The UI stutters and is very sluggish...

Bonjour, j'aimeris savoir comment supprimer les disques durs enregistrés sur LRC car quand ljes branches ils sont bien reconnus par lightroom mais je nai aucun accés aux images alors que je me sers toujours du même disuqe dur externe. Ensuite LRC m'a créé plusieurs liens vers le meme disque durs.Je voudrais tout remettre a plat pour repartir sur de bonnes bases.Maerci par avance de votre aide

I Recently moved to a new PC running windows 11.   After getting everything moved over, I went to exit LRC.  At this point,  I did not get a window asking if I wanted to back up the Catalog.  I went to the Exit dropdown expecting to find Catalog Settings, but Catalog Settings  is not there.  I did some research and tried to do a Reset but that did not work.  Any thoughts on where the Catalog Settings option is hiding?

Just updated my Lightroom Classic to Version 14.0, and the "Copy" and "Paste" buttons and menu functions are not working properly. The buttons do not function at all, and the drop-down menu option works sporadically. This is a vital function! Please fix!

On both a laptop and a workstation, both with LrC v 14.3.1, Windows 11, using images from a Fujifilm X-T5 (RAF). The resultant merge presents an image that is automatically flagged as rejected. I have reset the Preferences file. What may I have set incorrectly? Sys Info attached 

Bonjour, utilisant toujours le même disque dur avec une arborescence sur LRC, je me retrouve avec plusiseurs disque durs dans l'espace dossiers.Il me reconnais bien mon disque dur mais l'arborescence de mon disque dur ne s'affiche pas. J'aimerais savoir coment tout supprimer pour repartir sur de bonnes bases quites a faire une réimportation de toutes mes photosMerci beaucoup par avance de votre aide

OK, I have reset the preferences. Reinstalled. Deleted the loc file. Created a new library on startup. When LRC runs - if it runs - it looks fine. I try and import images and it sits. Does nothing. I'll finally hit the little X by "importing images" - it can be 5 seconds of 5 hours later - and I see a notification that nothing was found to import. There are no filters set, all the options like "copy images" etc. are unchecked. When it does not run I'll check task manager, and sometimes see several instances - so I'll close them all. Try and run again. It may or may not run. Then it's back to the beginning of this message. Reinstall, delete, etc., etc. Any suggestions? I really don't want to use PS to edit 1700 images but with the time I've wasted on this I probably could have.

Information in Loupe mode in either the Library or the Develop Module is suddenly not showing at all, nor showing when toggling with the 'Command I' keyboard shortcut.  No information shows.  Also, information is no longer adding to the filmstrip below.  I have tried toggling all relevant keyboard shortcuts in the View, Loupe and and View Options sections.  Have even tried reinstalling LRC from scratch.  Bizarrely, the keyed selections eg delete, or an added star/color rating DO show up in Library Grid mode and in the film strip - but only after an LRC shutdown and restart .  The Information overlay in Loupe mode still does not work at all.  Any ideas?? 

I'm experiencing a frustrating and expensive paper and ink-wasting issue when printing 13x19 size prints from Mac OSX 10.13.4 and LR Classic CC v8.0 on my Epson SC-P800. Things are printing well for awhile and then if I have a paper jam, say, or have to cancel a job because I started printing the wrong photo, when I try to print again with the same exact settings (page size, print size), the prints come out with the left margin suddenly a lot wider and the right side having no margin (borderless).I have tried to troubleshoot this  problem with Epson and they believe it is something with LR software and/or OSX because I'm able to print fine from Preview using a jpeg created in LR's print to file feature and the same Epson printer driver settings.The major reason this is so infuriating is because of its intermittent nature. I seem to always be able to print small page sizes fine (4x6s, letter) in LR, but it's the bigger sheets where I run into this problem. I've finally learned that

Hallo,ich habe seit mehreren Wochen das Problem, dass Lightroom Classic dauerhaft „357 Fotos werden synchronisiert“ anzeigt – ohne dass sich etwas bewegt. Folgende Schritte habe ich bereits ohne Erfolg ausprobiert: Cache-Dateien manuell gelöschtDen Sync-Ordner Lightroom Catalog-v12 Sync.lrdata umbenanntKatalog neu gestartet„Daten neu erstellen“ über die Alt-Taste in der Synchronisierungsansicht ausgeführtLightroom Classic vollständig deinstalliert und neu installiertAuch die Fotos, die in den synchronisierten Ordnern lagen, habe ich inzwischen gelöscht – das Problem besteht trotzdem weiter  Lightroom Classic zeigt weiterhin „357 Fotos werden synchronisiert“, aber es passiert nichts.Im Task-Manager ist keine Aktivität zu sehen (CPU und Datenträger fast 0 %). Ich nutze Windows 10 (kein Upgrade auf Windows 11 verfügbar) und die aktuellste Lightroom-Classic-Version, die dafür angeboten wird. Hat jemand eine Idee, wie ich die Synchronisierung wieder zum Laufen

Guten Tag, vor einigen Tagen hatte ich das Problem dass ich Bilder nicht inportieren konnte und es kam die folgenden Fehlermeldung. ich quitierte diese Meldung mit OK. Dann verschwand diese und ich konnte LRC wie gewohnt weiter nutzen.  Leider kommt diese Fehlermeldung seit diesem Zeitpunkt immer wieder wenn ich LRC neu starte. Wie kann ich das abstellen? LRC Version    MfG Ludwig   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules.]

When I try to move photos, I get the error that they already exist in the destination. The problem is that those photos don't appear in the destination when I check. For example moving photos from location A (93 photos) to location B (23 photos), LRC claims that they are already in location B, even though location A has many more photos than location B.Also similar when I try to move a whole folder - LRC claims that the folder already exists in the destination. I can't see the folder in that destination.Can anyone help?

Após a nova atualização do Photoshop 2023 para 2024, não consigo exportar as fotografias do Lr para edição no Ps. Não acontece nada, além de abrir a tela do Ps. As fotos não são exportadas. Obrigado!

I added many presets to Lightroom and there were no problems. Then I deleted the presets from Lightroom, I don't know why, but now I can't load the same presets. I would appreciate any help.

Lightroom classic wont open it says this

 I hope I can explain this. on the left is LRC my SSD. September and October Arent showing up in what I think of as "the usual place" now they are appearing in another location? I tried to sync but that made it worst. My file system show fine.