Lightroom Classic

Given so many reports of performance issues with 15 and 15.01,  has anyone who has had issues tested the new release of 15.1 and seen any improvements ? Mike

My agency is considering a switch from Classic to the cloud-based LIghtroom, which Adobe appears to call Lightroom ecosystem. For those who have made the switch, what are the pros and cons? Is performance better in the ecosystem version? Do you lose anything by abandoning Classic? Anything else we should consider for the decision? I've posted here many times about our performance issues. Last month, we moved all of our original photos from a server destination to a hard drive connected via USB-C. One day last week, performance problems previously experienced on the server resurfaced, including:make an edit, several minutes before the change appears in Historyexport a photo via keyboard shortcut or menu command, several minutes before the Export dialog window appearedexporting would take longer than normal (I know duration depends on quantity, but a batch of 10 photos would take several minutes whereas it typically takes a few seconds) We don't store any video files in Li

Running Windows 11 on a decent PC. Personally, I have never liked "Dark" mode but seem to be forced into it for Lightroom Classic (and Lightroom). Is there a 'light mode' I can enable? I haven't seen anything in preferences. Cheers Alan

I have been successfully syncing lightroom classic to the cloud storage.Recently it is showing constantly that it is syncing - it reports permanently syncing 53 photos. New photos and changes are successfully sync'd, but these 53 remain. Main issue is it prevents my Mac from sleeping which is how I have it set.I can see errors in the diagnostic report, but have no idea what to do to correct these. I have attached the report if anyone knows how to interpret.thanks   

I have an album in Lightroom Classic that has a custom sort order (not by date). Is there a way to ensure that the order is the same on Lightroom.com?

I have two PCs running Lightroom Classic. On each of them I have set the export option to choose the folder to save the export later. On one of them, I set it up once and the next time I do an export, it has remembered which folder I chose last time. On the other one, each time I export, I have to tell LRc which folder I want it saved in.   So, something is different somewhere, but I cannot find what or where. I've looked at all the preferences and as far as I can see, they are both the same. Anyone have any ideas?   Both PCs are running the latest Windows 11. They also now both use the same catalog file (on the network) although the issue was there when they had separate catalogs.   Cheers   Alan

hola, algien sabe por que sale esto y como puedo solucionarlo no me deja trasferir las imagenes de mis dos camaras sony ( a7ii y a7iv) que tengo en las dos me sale lo mismo  

Hi, I have a new laptop and need to transfer Lightroom from my old PC. I have seen several methods on you tube etc but can anyone advise a simple process to achieve this?Thanks, Dave

Buonasera, desidero segnalare un problema relativo alla visualizzazione dei file RAW (.CR2/.CR3) generati da fotocamere Canon. In condizioni normali, i file RAW dovrebbero presentarsi “grezzi”, quindi con colori meno saturi e con le distorsioni/aberrazioni dell’obiettivo ancora presenti, pronte per essere corrette in fase di post-produzione. Tuttavia, ho riscontrato un comportamento anomalo con l'inseriemnto dei file RAW in Adobe:Quando apro un file RAW con Anteprima, l’immagine inizialmente appare identica al JPG associato.Una volta espansa la visualizzazione della stessa foto, però, l’anteprima cambia e mostra una versione diversa: più scura e con distorsioni visibili, quindi più coerente con un vero file RAW - come dovrebbe essere. Il problema si presenta anche quando importo il file RAW in Adobe Lightroom, Lightroom Classic e Photoshop: il software riconosce correttamente il formato RAW, ma utilizza l’anteprima errata, restituendo un’immagine praticamente identica al

I am experiencing two issues in Lightroom Classic:1. Multi-photo rotation in Print module:- Cannot rotate multiple selected images at once.- Must leave Print module and rotate in Library or Develop.- Disrupts workflow and increases error risk.2. Blank prints with DNP DS820A:- Some photos print completely blank, even though previews are correct.- Paper, ribbon, and printer connections are correct.- Occurs only when printing from Lightroom.System Details:- Lightroom Classic 13.0- Windows 11 Pro, 64-bit- Printer: DNP DS820A- Time Zone: AST (UTC -4)I request Adobe to consider adding multi-photo rotation in Print module and provide a fix for blank printing issues.

I have the same problem but on all my photos.It becomes impossible for me to filter only modified photos.Any suggestion?

Im working on a final project for college, so fast replys would be appreciated if able Im having an issue with lightroom very slightly cropping my images, and I have been unable to find a way to restore the full resolution. Ive attached some screenshots showing the raw files in explorer, the import settings, and the files in library with the changed dimentions. Ive already looked at a lot of guides having simmilar but not the exact same issue, and no fixes ive tried have worked. I tried just resetting the crop in the develop module but it doesnt show any crop to reset, Ive tried a very old plugin to restore edges and that didnt work either. I dont think its a camera setting as the actual raw file has the expected resolution, its just lightroom thats cutting it down. I also have made sure there is no lens correction being applied either.  Im at a loss here, any help is appreciated

Bonjour, Problèmes avec lightroom classic. Module Dévloppement, exportation; J'utlise cette appication sans problèmes depuis des années. J'importe des photos , d'un dossier sur mon Pc. Dans le module Bibliothèque, je documente ma photo, Mots clé,  Titre, légende, Créateur, Copyright, etc, du classique que je fais depuis longtemps.Je passe au module Développement. Je ne fais aucune retouche, j'envoie de suite sur exportation.La photo est exportée dans le dossier dédié, tout va bien. A l'ouverture des Propriétés/ Détails, c'est là que tout va mal, désespérement vide. Aucun des paramètres écrits dans le module Bibliothèque ne figure dans les propriétés. Trois jours je suis là-dessus à ne rien comprendre.Je me suis énervé, j'ai viré lightroom, contrôlé mon Pc viralement, puis réinstallé Lighroom et surprise même problème. L' erreur que j'ai peut être commise c'est d'avoir gardé mes paramètres personnels. Merci, si un de vous à une idée, cela dépasse mes capacités techniques.

The Supported Cameras page says that the Canon EOS R6 Mark III doesn't have camera-matching profiles:  But if you download sample raws for that camera from here, they have camera-matching profiles available, e.g.   

For no obvious reason - to me - suddenly LrC does not recognise people anymore... Even when I use a photo  with 1 person full figure I get the message "no people found".  All other options work perfectly. 

Hello! So I have been working on a folder of photos for a while and I went back on to my computer today and now im only seeing 6 imported folders when there should be 20-30. I have not changed the names of any folders that would cause them to not be found. I have not moved the location of them either. I store all my photos on a hard drive. I have no idea why its not showing all my imported photos. Any ideas would be appriciated since I really do not want to start all over. Thanks!

My film strip and grid view scroll the opposite way they normally do

I have object selection and dust removal working fine on my Windows 11 laptop, but they both fail on my desktop. I have updated the video driver but it is still failing. For dust removal I click the Apply checkbox, it briefly checks, then unchecks again immediately without doing anything. Below is my system info. Thanks.  Lightroom Classic version: 15.0.1 [ 202511041508-dddee541 ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.26200Application architecture: x64System architecture: x64Logical processor count: 8Processor speed: 3.0GHzSqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.171 CPU Utilisation: 3.0%Power Source: Plugged InBuilt-in memory: 32606.2 MBDedicated GPU memory used by Lightroom: 605.2MB / 4052.5MB (14%)Real memory available to Lightroom: 32606.2 MBReal memory used by Lightroom: 5157.1 MB (15.8%)Virtual memory used by Lightroom: 6495.0 MBGDI objects count: 752USER objects count: 2449Process handles coun

App version: Lightroom Classic (latest version at the time of writing)Platform: Windows 11 64 bitHardware: RTX 4060, Ryzen 9 7900, 64 GB RAM, NVMe M.2 SSDDescription of the problem:I am experiencing severe performance issues in Lightroom Classic when working with large photo imports.First issue: AI Denoise does not work during import.When I select an import preset with AI Denoise enabled, the denoise is not applied. After the import finishes, I have to manually run AI Denoise on each photo.Second issue: photos are not processed until they are visible on screen.After import, images are not fully processed in the background. Lightroom only processes photos that are currently visible in Grid view. For example, when importing around 10000 photos, only about 300 visible images get processed. I have to scroll through the grid to trigger processing of the remaining photos.Third issue: previews and metadata sync do not help.I tested Standard previews, 1 to 1 previews, Smart Previews, and metad

BonjourJe n'ai plus accès au débruitage (fonction détails) sur LightroomQuelqu'un a t'il une solution?Un grand merci

How do I delete old programs from "Edit In" ?

Hi after the import of my latest photos, Lightroom Classic every time restarts the screen with import (where you select the source and the photos that you want to import). I tried already to restart my pc, I deinstalled Lightroom classic (twice). I have the Lightroom Classic 15.0.1 with windows 11 (latest updates have been done). I have more than enough space, so no crash there. Does anyone has an idea?  

LrC is not importing .arw photosIt was able to import photos beforehowever when attempting to import my photos, I'm prompted with:"The following files were not imported because they could not be read or the destination folder is unwritable (1602)"The same photos from the same sd card were able to be imported to Lightroom

Summary:After upgrading from Lightroom Classic 14.5.1 to 15.0.1, the GPU engine no longer initialises. Masking becomes extremely slow or unusable. System Info consistently shows: Build: UninitializedGPUDeviceEnabled: falseDirect2DEnabled: false  Rolling back to 14.5.1 restores basic masking, but GPU acceleration still does not activate in that version either.Environment:Windows 11 ProNVIDIA GeForce RTX 5060 Ti (Studio Driver 591.44, Standard)AMD Radeon firmware-level GPU on Ryzen 7 9700XDual-monitor setupDxDiag: all DirectX features OKPhotoshop detects and uses GPU normallySteps to Reproduce:Install Lightroom Classic 15.0.1Launch LightroomOpen System Info → GPU sectionGPU engine is not initialised; masking becomes extremely slowExpected:GPU engine should initialise; masking should use GPU acceleration.Actual:GPU engine does not initialise; Lightroom reports “Build: Uninitialized” and disables GPU processing.Notes:Clean NVIDIA install performed with DDULightroom preferences re

This issue has been active since December 4 and remains unresolved despite extensive Adobe Support involvement up to Tier 3.Adobe Support Case NumberADB-42913017-K1J8Summary:Lightroom Classic is unable to reliably sync collections and albums to Lightroom Web, even after images and albums are deleted from the cloud. This suggests that Adobe’s cloud backend retains internal asset IDs tied to previous uploads, resulting in a persistent desynchronization (“ghost” state).Observed behavior:- Collections partially sync or fail to populate- Images appear in All Photos but not in their assigned albums- Previously uploaded images behave as if they still exist after deletion- Sync issues persist across multiple catalogs, indicating a cloud-side issue rather than local catalog corruptionImportant clarification:This is not resolved by emptying Lightroom Web. The issue persists across catalogs and after extensive cleanup.Impact:Professional workflow is blocked. Tier-3 troubleshooting led to fragment