Photoshop

Hello,I have a Creative Cloud subscription on macOS and I'm trying to switch my apps' interface language from English to Czech. This affects multiple apps: Photoshop, InDesign, Illustrator, and Premiere Pro. All of them keep running in English no matter what I try.What I have already tried, without success:1. Changed "Default install language" to Czech in Creative Cloud desktop app > Preferences > Language.2. Fully uninstalled and reinstalled the affected apps (InDesign, Photoshop, Illustrator, Premiere Pro) after changing the language setting.3. Downloaded and ran the Adobe Creative Cloud Cleaner Tool for macOS to remove leftover files, restarted my computer, then reinstalled the apps.4. Changed my macOS system language (System Settings > General > Language & Region) to Czech, with Czech listed as the top Preferred Language, and Region set to Czechia. Restarted the computer.5. Verified that the Czech language resources ARE physically present in the app bundles — for ex

The Topaz upscaler is not working and is giving an error for the last 24 hours.I tried 2x and 4x.The interesting part is that other upscalers aren't working either. I have Adobe credits. The image is royalty-free.I couldn't solve my problem at all.  

Has anyone noticed they were subscribed to plans without knowing it? Also, any time you try to access anyway to speak to customer service about it, it just gives you a blank page. I’ve been being charged for two extra plans on top of the one I already have. Instead of $29.99 a month, I’ve been paying $83 a month. I want this fixed but I also can’t contact them. 

When I use the Lasso Tool in Photoshop version 27.3.1 the selection appears to the right of where my Lasso Tool is pointed. In the included picture I started to at the top left of the dog leash and dragged down on the left, then over to the other side of the leash where it attaches to the dog collar, then up along the right side and finally across the top to the left side of the leash. You can see the selection show where I started, but completes on the far right of the leash. My Performance option “Use Graphics Processor” is checked. Note: I’ve unchecked this option and the problem is still the same. History States set to 50Cache Levels: 6Cache Tile Size 1028KAdvanced Graphic Processor Settings:Use OpenCL checkedAnti alias Guides and Paths: Checked30 Bit Display: UncheckedGPU compositing; Checked  My computer specs: CPU: AMD Ryzen 9 7900GPU: NVidia RTX 5060 ti 16 GB RAM: CORSAIR Vengeance DDR5 RAM 96GB (2x48GB) 6400MHz CL32 Intel XMP iCUE  

Has anyone here tried the new AI Assisted Editor in Photoshop 27.10?I’ve been exploring the new AI workflow, and it seems like a really convenient option for quick edits. I’m especially interested in how other designers are using it for everyday creative work.The natural-language editing approach looks like it could save quite a bit of time. Would love to hear what everyone is trying with it so far.

How do I enable Clipping Warning for the New Light Adjustment Layer?

Message also says ->  var g_StackScriptFolderPath = app.path + "/"+ localize("$$$/ScriptingSupport/InstalledScripts=Presets/Scripts") + "/"

Using Mac OS, I am manually creating an Instagram Reel in Photoshop by stacking multiple images as layers and then converting them into frames using the Timeline panel. However, despite following the correct steps, I do not see the option "Make Frames from Layers" in the Timeline panel menu. Additionally, the "+" (Add Frame) button is missing. This issue has occurred multiple times. The first time, I resolved it by completely rebuilding the file, but now that the issue has reappeared, I believe I am missing something fundamental about how Photoshop handles this process.  I haven't been able to recreate the success from the last time this happened.  Steps Taken & Expected Behavior I am following these steps: 1. Prepare the Document   - Create a new 1080 x 1920 px, 300 dpi document.   - Load multiple images into separate layers using **File > Scripts > Load Files into Stack.   - Ensure the background is blurr

Could someone please help me figure out how to tint this plain maple wood so it matches the stained wood shown next to it in the attached image?I want to preserve the natural wood grain rather than wash it out. Ideally, I’m looking for a way to tint the maple so the existing grain remains visible while taking on the same color and appearance as the stained wood.  

Enabling 'Spacing' causes this glitch. However, if I uncheck 'Spacing', I can't draw continuous lines or make smooth, connected brush strokes with my mouse.

I opened a closeup photo of someone with a line of text over it. I selected image, said “remove text, keep image the same” (which has worked many times before) and it replaced the entire image with a landscape, then it replaced it with an eagle. I used nano banana 2.5/3/3.1 on beta and normal versions latest updates. Not looking to use the remove tool, or the firefly tool either. Sometimes the image will be a mag cover and I need to remove text over the entire image to clean it up.  

When I click on text or image layer, the boundry box is tightly fit around the text or opject. As soon as I click the edge of the boundry to expand the text, photoshop changes the slection and includes a much larger area with blank pixels. I used to be able to click and hold a bounry edge and drag to the new size. Now when i click the edge, it expands and then I have to click the new expanded edge to resize.Is there a fix for this? It is incredibly frustrating when trying to align edges. Why can I no longer just drag an edge without it resizing the boundary? If I group the text (Ctrl +G) it will not add the blank pixles when dragging the edge but thats crazy to do for every text layer. What is happening!?

When trying to open Photoshop (any version) the splash screen opens as usual but when it goes away nothing happens, no background task or anthing, Photoshop completely crashes. The splash sceen always dissapears at the same mesage, roughly translated from german it says “calculating memory/storage”. The Logs look like this:[2026-08-16_14-21-10][4716][Warn] [general] We are going to deprecate hostInfo access soon. Please use HostInfoController instead.[2026-08-16_14-21-10][4716][Warn] [general] Host should provide base paths for persistent and temporary storage for 1P plugins in uxp initialization![2026-08-16_14-21-10][4716][Warn] [general] We are going to deprecate hostInfo access soon. Please use HostInfoController instead.[2026-08-16_14-21-10][4716][Warn] [general] We are going to deprecate hostInfo access soon. Please use HostInfoController instead.[2026-08-16_14-21-10][4716][Info] [general] Instead of the WebView2 runtime in the system, UXP will use the WebView2 runtime in the fold

Hi everyone, I would like to report this explicitly as a bug report, and I kindly ask that it not be converted into a question. The behavior is reproducible in my setup and, from my point of view, affects WinTab support in Photoshop 27.6. After updating to Photoshop 27.6, WinTab still no longer works reliably. I need WinTab because pen input is much smoother and more precise with it, especially when working with sliders, numeric input fields, and Photoshop UI controls in general. Reproducible behavior With WinTab enabled, Photoshop 27.6 freezes as soon as I move the brush size slider. Important detail:The freeze happens even when I move the slider with the mouse, not with the Wacom pen.To me, this strongly suggests that this is not simply a Wacom pen issue, but a problem in Photoshop’s WinTab handling itself. Test results in Photoshop 27.6 WinTab enabledopened a new test document selected the Brush tool moved the brush size slider using only the mouse Photoshop freezes immediately afte

Selection Brush tool doesn't work on grayscale pages, didn’t tried all the other modes, but I’m sure it doesn’t work on grayscale pages.The history shows I used the Selection Brush tool, but no selection is made at all, all other selection ways works just fine, including quick mask mode.

Is there a way to actually get rid of the Layer Cleanup panel menu item?I have it set to be not visible in settings, but it’s not working.thanks

Estou enfrentando problemas recorrentes ao utilizar a ferramenta IA Generativa no Photoshop.Ao abrir o Photoshop, os ícones da ferramenta de seleção muitas vezes não aparecem. Quando consigo fazer uma seleção e clico em "Preenchimento Generativo", frequentemente é exibida a seguinte mensagem de erro:"Não foi possível atualizar os arquivos de objeto inteligentes devido a um erro no programa (b46572.222)."Em outras ocasiões, em vez de exibir essa mensagem, a ferramenta gera apenas um fundo preto, sem realizar o preenchimento da imagem.Esse problema ocorre há mais de seis meses. Como a ferramenta ainda funcionava ocasionalmente, nunca abri um chamado de suporte. No entanto, a situação piorou significativamente.Atualmente, preciso fechar e reabrir o Photoshop diversas vezes até que a IA Generativa volte a funcionar. Além disso, após algumas horas de uso contínuo, o problema retorna, obrigando-me a repetir todo esse processo novamente.Gostaria de ressaltar que estou utilizando a versão mais

When using Adobe Photoshop 2026 any Version of 27.x up through the latest 27.10 we cannot open .png files that were created by our engineers using Creo 8. As soon as you open them Photoshop crashes to the desktop.  We have hundreds of these files saved on a network file share from the past 6 or 7 years. If we open the file in another tool like MS Paint and save it as a .tiff or other file type it will open in the new version.  If we save the same file as a .png file inside photoshop 2026 it will then work fine moving forward.  We won’t be able to upgrade to a newer version of Creo and Windchill yet so we either have to open all of these files in another tool and resave them or we can open them in Photoshop 2025 Version 26.XX with no issues.  We have ruled out all graphics card issues by disabling the GPU and using onboard graphics, also disabling it in photoshop as well.  We checked all the system files and C++ redistributable files and repaired all of that and ran a full system filesc

Since version 27.4 and continuing in 27.5 I’ve been experiencing image flickering when using the Curves adjustment. In version 27.4, the issue occurs in all Curves use cases. In 27.5, it appears primarily when applying Curves as a Smart Adjustment on a Smart Object. It is slightly improved, but still noticeable when using Curves as a standard adjustment layer.I’ve attached a video demonstrating the issue: The first example shows Curves applied as a Smart Adjustment on a Smart Object (strong flickering). The second shows a direct adjustment on a non-Smart Object layer (no issue). The third shows a standard adjustment layer (minor flickering still visible). The flickering is clearly visible, especially in the first case.Please look into this issue, as it makes precise adjustments very difficult.Thank you.example video:https://youtu.be/jbe6K-ORr44 

Thanks to all who took part in our last, ‘Holy Island’, challenge. There were some great entries that showed the imagination and skill of this community.The regulars in these challenges will know that sometimes we start with a scene and sometimes an object. This week we have two starter images, the first with a magnifying glass and a paper. The second is the same magnifying glass but with a transparent background. You can use either, or both, to start your entry. The scene was created and rendered in Blender 3D with Adobe Substance 3D Designer and Adobe Substance 3D Painter used for textures.How imaginative can you get with this simple scene, or object?The “rules”:Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. The challenge is not limited to Pho

Since the 27.10.0 update (installed around 27 August 2026) Generative Remove has been unusable on normal camera files. ENVIRONMENTPhotoshop 2026, version 27.10.0 ReleasemacOS, MacBook Pro 16 inchPaid individual subscriptionStandard generative features listed as unlimited, 1980 of 2250 premium credits remaining STEPS TO REPRODUCE1. Open a 6884 x 4302 px PSB (a cropped 30 MP full frame camera file), ProPhoto RGB, 16 bit, multiple layers with smart filters.2. Select the Remove tool. Generative AI on, Sample all layers on, Create new layer on.3. Paint over a small object and press Enter. RESULTThe Removing area progress bar appears and stalls at roughly ten percent. After about a minute the dialog disappears, the mask is discarded, and no Remove tool edits layer is created. Nothing in the document changes. Sometimes the message Please check your internet connection and try again is shown. Often there is no message at all, so there is no way to tell a failure from a slow success. EXPECTEDTh

Recently upgraded to 4K monitors under Windows 11 (i9, 128Mb) with an NVidia RTX 4060.  The speed at which Photoshop operated seems significantly improved.  Am I just imaging things?  It got me to wondering if the software is written for the latest (well near latest) and greatest hardware and has capabilities to adjust down for what is considered a reasonable level of backward compatibility.  Figured some of the gurus herein might have an understanding of how the interactions are actually taking place.  Thanks for any insights.