Photoshop

Eu pago a Adobe no plano Fotografia 20GB porque eu nao trabalho mais com fotografia, entao uso pra hobby e uso raramente, entao gastar $37/mês já acho caro porque nao uso muito, agora a Adobe aumentou para R$71, isso nao faz sentido, um aumento de 91%.A Adobe vai começar a perder usuários, porque eu ja estou cancelando e vou usar o que tem no mercado grátis ou mais barato.Pelo menos façam um plano muito básico, por exemplo, eu nao preciso de 20GB, quando eu edito alguma foto, eu salvo comigo e nao deixo na nuvem. Nao faz sentido eu continuar pagando.Adeus Adobe!

I think the following can be achieved using Channels but I don't know how, as I have very little experience with them.  In the first screenshot, I have a Curves adjustment layer lightening the highlights in the area bounded by the yellow rectangle.   Even though the Curves layer is applied to highlights only, it is somewhat affecting the entire area.  I only want the white paper pieces lightened, and not the dark green background.  (In the 2d screenshot, the adjustment layer is turned off, showing the unaffected background as I want it to appear.)   Is this best done by using Channels, and if so, how?  Thanks.       

I would like to know if Photoshop 7.0 will work with a Windows 10 system as it has with Windows XP and Windows 7.0.  I get all I need out of PS 7.0 so I don't want to buy an upgrade when I already have what I want.  The question also applies to Adobe ImageReady 7.0 which came with the PS 7.0 bundle.And, has anyone tried Gimpshop which is a freeware and a recommended alternative to Photoshop for those who only use the simple versions.

I'm currently using Photoshop 20.0.7 on Windows 10. The Creative Cloud app is inviting to install version 21.0.1. Before updating I want to understand an apparent change of name in the new version. The Creative Cloud app describes my current version as Photoshop DESKTOP, and the new version as Photoshop MOBILE. What are the implications of the new name?   {Thread renamed by moderator}

Hi, When I tried to install Magic Touch Pro 2.3 into Photoshop CS 5.1 Extended 64 bit version it would not install and says not a valid signature so I did some research and found Adobe Extension manager 5.02 that also did not work. Any ideas how I can override Adobe extension manager? 

Hi, I’m experiencing an issue in Photoshop where the Eraser Tool (E) doesn’t erase immediately across the entire brush area. I’m using a hard round brush, but the erasing effect only starts when the center of the cursor gets closer to the area I want to erase. This makes it difficult to work accurately since I want to see the effect immediately rather than guessing.What I Have Tried So Far:Checked Brush Settings: I’m using a hard round brush, with Spacing set to low (0–10%) and Smoothing disabled.Checked Cursor Settings: I selected Precise Cursor and enabled Show Crosshair in Brush Tip.Disabled GPU Acceleration: I turned off "Use Graphics Processor" in Performance settings, but it didn’t fix the issue.Reset the Eraser Tool: I used "Reset Tool", but the problem persists.Reset Photoshop Preferences: I restarted Photoshop while holding Ctrl+Alt+Shift to reset preferences, but the issue remains.Tested on Different Devices: The problem occurs with both a mouse and a graphics tablet.I’ve tri

就是如果我在网页复制了一段文字，然后去到Photoshop里面直接粘贴Ctrl+v，不使用Photoshop文本工具的前提下他会直接创建文本图层么，就像Illustrator一样直接复制就会出现文字，而不需要通过使用文本工具进行创建文本

The color palette will become black and white when using spot colors in Photoshop. When using a white brush to paint the spot color layer, the spot color layer image will disappear, which is the opposite of the image appearing when the mask white brush is painted. What is the meaning and function of black and white painting in the spot color palette?

How to use a .psjs file in Photoshop to call a .jsx file, for example, if the content of the .jsx file is: alert("Hello"); 

Hi, I've just upgraded from a Nikon D500 (20.9 megapixel) to a Nikon D850 (45.7 megapixel) camera,  and almost immediately while editing in Photoshop, I've hit the 2GB limit of PSD files, and have had to switch to PSB files instead.I think I may need to change my workflow to manage file sizes more effectively going forwards. Up until now, I didn't give it a great deal of thought (with the 20..9 megapixel camera)... creating layers whenever I needed to, and never hitting the 2GB limit. I've already changed "Maximize PSD and PSB compatibility" to "Never" in the PS settings, which does reduce file sizes significantly. I'm not concerned with losing compatibility with old versions of Photoshop. I'm also wondering, if I'm going to go over 2GB file sizes regularly, whether I should just always save in PSB format from the start, so I never have to be part-way through an editing process and have to change from PSD to PSB. If anyone has got any tips on how to manage file

Hi,Is it possible to include/require another file in a .psjs script?I'm not talking about a plugin, but a stand-alone .psjs script.If not, I believe this is possible with plugins?Can I put a script in a plugin and use it without an UI interface, that is, use the plugin just like a script? Thanks in advance,Erik.

I want to save a bit of vertical space and have the toolbar in a corner like a panel 

Hi,Since the last update to 2025 version of Photoshop, Print Studio Pro has stopped working for me.I am running a Mac on Sequoia and previous updates I could always right click on the app and check the "open with Rosetta" box and it would run. I've done the same as I have always done and I cant see Print Studio Pro in automate. I updated my drivers and I have the current PSP software so I am at a loss. Any help is appreciated.

Cette semaine on grave dans la pierre avec PhotoshopCréation d'un motif, choix de la typo, application des effets sur le calque… Tout pour un texte en pierre et en relief.https://youtu.be/kBQVSHpaEsk

Please fix the Polygon Lasso Tool!!! The tool should ONLY close the path on a DOUBLE click! I have a seperate mouse button set for double click so I can work quickly in Photoshop, but the last 3 Revi=sions to Photoshop have made it IMPOSSABLE to work quickly with the Polygon Lasso Tool. It NOW takes me HOURS to do the same selections I have been doing for the last 20 (yes 20 years). I have been using PhotoShop since 1990 and this IS the worst. I have to wait .5 of a second or more between clicks to keep it from AUTO closing and ruining 5 minutes of hand selection. NONE and I have tried them ALL that Adobe says is the latest and greatest work for auto selection. I know some of the auto select tools work for some of the people, but WHY DID YOU BREAK the Polygon Lasso Tool for those that need it. There are no adjustments that I can find to change the sensitivity in the prefrences.

hi all,   Can anyone tell how to resolve this issue? I am using Mac and the Photoshop version is 26.4.1   Thank you very much.   From Jerry  

I want to draw layered rectangular shape layers in the image, similar to a brick effect, but I don't know how to accomplish this. The image below was manually pieced together. I hope to control the number of brick columns using variables Thank you all for your help

 Bonjour je n'arrive pas a modifier mon CTRL + z je voudrais que ça fasse un retour en arrière et pas fermé la pageSi quelqu'un peu m'aider je suis perdue 

Greetings,Is this a bug or not a feature?There seems to be no way to do a select all Artboards in the Layer window using shift+click. I've found that I can ctrl/cmd+click on each Artboard name in the graphics area one by one or I can ctrl/cmd+click on each Artboard in the Layer window, and I can then change the Artboard background simultaneously to transparent (or the same color), but if I try a shift+click on the top and bottom Artboards it Layer window, PS treats this as some type "select everything" and not just a "select all" Artboards, so the Properties window just goes blank, where the Artboard background color box was when individually picking an Artboard or ctrl/cmd+clicking on each Artboard. Thanks for any help on this.

Hello Community, I'm curious about Photoshop's randomization capabilities. I'm looking to batch edit a group of photos using a Photoshop action, and within that action, use filters in the Filter Gallery. Is there a way to randomize the parameter values used in a Filter gallery filter? I've done some research and it looks like the best way to do this would be through the use of a script. Is anyone aware of a Photoshop script that can randomize filter parameters? I've looked within this forum and other places online for days and have been unable to find anything like this. I'm completely new to scripting so any help at all is greatly appreciated 🙂 

I'm getting fed up with you Adobe This is a recurring issue with smoothing creating a "shoelace" effect. I'm on a brand new mac, and a brand new Cintiq. I've tried reinstalling drivers, installing older versions of photoshop, and toying with smoothing settings. As far as I can tell, if I want to use smoothing, it generates these artifacts at the end of my strokes.    I've used photoshop for a couple of decades professionally, but I'm at a crossroads with whether I will bite the bullet, cancel my Adobe subscribtions and switch to Pro Create or another product. Fix this.  

Is there a solution to have Lightroom or Bridge (using Adobe Camera Raw) perform Adobe Super Resolution 2x upscale directly to TIFF format? The way it works now, when I use "Enhance 2x," the files don't appear upscaled when I load them into other editors, Topaz programs, XnView, and others. It unnecessarily complicates my workflow to have to enhance to DNG and then convert that DNG to TIFF in Adobe Bridge to get the upscaled image. Thanks

In Photoshop 2025, the option "Use legacy New document interface" is greyed out, but when I reset preferences it goes back to normal and I can tick the option. Even I select it and press ok, my interface is still old one, and it's bugging sometimes, takes a 10-20 secs to open it. I tried everything, from reseting preferences to downgrading on old versions and I don't know what to do anymore. It's also happening in my Illustrator 2025. Please help, It's really frustrating. Btw I'm using Win11

I recently updated to Photoshop 26.4.1 on Windows 10, and I've noticed that I can no longer create a gradient mask that fades out completely to full transparency. Even when I set the black point of the gradient mask to RGB(0, 0, 0), the layer doesn't fade out as expected and it still remains partially visible.I've double-checked that my gradient is set to black-to-white, and I've tried different blending modes and opacity settings, but nothing seems to fully fade the masked area. Has anyone else encountered this issue, or is there a setting I might be overlooking? Any suggestions would be greatly appreciated! Thanks!