Premiere Elements

I habe Premiere Elements 2021 and can't work with the sound. The sound effects don't 'stick' on the timeline - when trying, there's shown the 'not-possible-sign' (crossed out cirkle).And moving the yellow line in the timeline doesn't has an effect. Neither with the whole line, nor with a part between keyframes - the volume doesn't change, even if the line is positioned very high or low.Fading out an in don't work as well.The clip-volume in the left above edge of the timeline is activated.What can I do?Thank you very much for your help!Manuel

I recently did an update on my computer, and after the update all I see are these green lines in my preview.  I've heard of this problem before, but the solution seems to be to get an older version of a driver, which I don't really plan on doing.  Is there any way to fix this without getting an older driver, or am I stuck with a green barcode on my screen?  Thanks.Note: I am using Adobe Premiere Elements 2019

Hello all,   I am looking for a feature in Adobe Elements 22 that creates many "sublclips" from a much larger piece of video. <<sub clips is a feature that is available in Avid Media Composer.   The idea is that you have a long piece of video and you want to view the video, pick the sections you will actually use in your edit,  and save these sections as subclips to be used for later when you do your edit. Essientially I want to find all the material I want to use in the my edit, prior to doing any editing, and save these pieces as subclips so I can just drag a subclip into the timeline vs. drag the entire piece of video and then trim it.  Ideally these subclips would show up as individual video files in the Project Assets list, and they would be nameable so at first glance I know what the clip is. I have not been able to figure out how to do this in AE.   Is this doable?  

New 2022 Premier Elements. Much to bright. Can not see numbers on Time Line. All Tools and Icons are verily visible on whole page. Set my Monitor at the highest contract that is has. Has no effect on Premier when trying to work on project. Is there a setting in Premier 2022 where I can increase contrast?. Make it much Darker?   Ray Isaacs [Personal information removed by moderator.]

Let's say my source video is 4K. I made some edits and exported an 1920x1080 30-minute video. If I want to delete a 2-minute portion and shorten the video to 28 minutes, can I tell Premiere Elements to re-use the work it has already done within the original project? Or must I start a new project, use the 30-minute video as the source, and delete 2 minutes in this new project? Thanks in advance for any tips.

Photoshop Premier Elements 2021 I am in the process of editing a concert music video. I will be working on a section of it and move to another section of the video and it locks/freezes up on me. I wait a few mintues and it becomes active again. I render and save quite often as I am editing so I don't have to go back and recreate the wheel.I have a Dell XPS 8930 desktop, with a Intel (R) Core(TM i7-8700CPU@3.20GHz, 16GB Memory. I am using a 5TB Seagate external hard drive to store the files on. Do I need to increase the RAM? Or is it the processor. Thank you, Chris C. 

I haven't used Premiere Elements for a long time but have just upgraded from APE 11 to APE 2022. However, I am hitting an unexpected problem. When I render a video with one video track and one audio track, the audio track is never included. The audio works fine in edit mode. This same problem has occurred with two different videos. Have I missed some key configuration setting for the rendering process?

Hallo,ich arbeite seit Ewigkeiten an einem Video für die Großeltern. Leider kann ich seit kurzem keinen Clip mehr verschieben. sobald ich einen Clip anklicke wird er unendlich lang und zerschießt damit das ganze Projekt. Ich weiß echt nicht mehr weiter. Zig Stunden Arbeit für die Mülltonne. Vllt kann mir hier noch jemand helfen. Dankeschön!Lg Corinna (Premiere Elements 17)

How can I separate a single frame from a video?

I'm trying to learn this software as someone with little experience with video editing, and when I try to put a clip into the timeline, it appears distorted and pink and green. My laptop is a LENOVO IdeaPad 320s-14IKB. Can anyone help me fix this issue? 

So I upgraded to Premiere Elements 2022 in the bundle with Photoshop Elements today, but I noticed that my graphics cars, the nVidia RTX 2080 Ti, seems not to be supported, even the 1080, 2060, 2060 Super, 2070, and 2070 Super are supported (according to https://helpx.adobe.com/premiere-elements/using/gpu-acceleration.html#recommended_cards). Did Adobe forget to whitelist the 2080 and 2080 Ti? That is a rather disappointing situation for me at the moment.

Hello all, I am in the process of creating a player highlight video in Adobe Premiere Elements to be used for college recruiting purposes and need help to create a player information title similar to this: https://youtu.be/GnSXHMNUGGM?t=14 or this: https://youtu.be/egi-ok3hyOs?t=11  Do I have to do this in separate program and then import it as a jpg? Or can this be done in Elements with the tools they provide? Are there Title templates I can buy or import/open in Elements to do this? Thanks!

I have Premiere Elements 2018.  I need to replace my Windows 10 comptuer.  The new one will likely be running Windows 11.  Will I still be able to run my copy of Premiere Elements?  (I'm assuming that I'll be able to move my copy - maybe that's not true.) What about the latest version of Premiere Elements?  Will it run on Windows 11?

To Whom It May Concern; Will Adobe start supporting AMD Graphics Cards within Adobe Premiere?Currently only 3 models are supported:- Radeon Pro WX 2100- Radeon Vega 8- Radon RX 5600 XTLooks like Nvidia is fully supported, but there is absolutely little to no love for the AMD users.Why is there no support for AMD?

Hi there, Please Help! I have a bad problem. I created a 1080p30 FPS project and imported a bunch of 1080p60 FPS videos in Premier Elements 22 and did a huge edit. Once I went to Export the project I realized that my project was 30FPS and therefore the video quality wasn't close to what it could've been. Now I'm trying to figure out a way to either make the existing project a 1080p 60FPS project, or somehow copy this project into a 1080p 60FPS project. Any ideas? Btw, when I check the properties on my video media in this 30FPS project, the clips say that they are 30FPS, so I don't even know if what I want to do is doable coonsidering when I added the media to the project, it seemed to convert the clips from 60FSP to 30FPS. Is there a way to just export the timeline events themselves? And then import the edit itself into a new 60FPS project and then just add the media to it? Thanks!

Hi there,I just purchased Premiere Elements. I started editing a video in the free trial version, and after getting most of the video edited I decided to purchase it to immediately get rid of the "free trial banner" across the video. However, when I received the full version, the video I was editing now has this purple and green glitch over it. This was not present in the trial version. There are some fixes available for this in Premiere Pro, but I have found nothing to correct the problem in Elements. I checked my Windows Updates and everything appears up to date on my computer.If I cannot get this problem fixed within the next 24 hours, I'm likely just going to demand a refund. I cannot use a program that brought this major of an issue within my first few minutes using it.If you can help me that would be greatly appreciated. 

Hi I have used Prem Elements a while ago.  I have installed 2022 ( paid for ) and am having trouble with taking assets to the timeline.  First asset is ok and goes to vid1 and audio 1 as I would expect.  The next asset occupies mutiple time lines and once on mutiple lines you cannot selectivly delete the mutiple insertions. Help   !!!

HelloWhen I create an MP4 movie file in Premier Elements 11 for viewing on a computer and TV DVD Player, Premier Elements also creates a Layout Folder, a .prel file, a log file, an Encoded Files folder, and an Adobe Premier Elements Preview Files folder - all inside the folder that holds the MP4 movie.When I burn the MP4 file to DVD using software such as ImgBurn, do I select the whole folder, with these related folders and files inside it, or only the MP4 file itself?Thanks!

Good day,Please may I ask for some guidance wrt using titles & motion titles across different projects. I have seen there should a "Export File" option when right clicking on project assets to "export / save" and then to be pulled in to other projects as needed. However, this options "Export Title" is not available. It there another way to do this?Example: One project has been finalized with titles / backgrounds / motion all created via Elements Premier 2020 and works great in this project. Now with new content added (let’s call it season 2) one uses the same titles / background as in "season 1". The seasons are different projects but one wants to keep uniformity.How can this be done? Thank you in advance.

I really like creating movies in Premiere Elements, but am disappointed that I can't create menus/chapters and then burn to a DVD.  Does anyone recommend any programs/software to use to take the finished movie from PE and then create menus/chapters and then burn to a DVD?

I have a 3 minute instructional video with narration & static text titles matched to the narration. My text titles have no bacground or a transparent background. I have located the text titles all over the screen as the video plays. I have text titles appearing at top, bottom, middle & side, depending how the background affects readability of the titles. I want the text titles to all run at the bottom of the screen with white text on a black background or black text on a white background.    I assume my email is attached to this message, But if you see no email, use REMOVED Thank you for any time you may spend on this. ~ Pat [personal information removed for your protection][This is a public forum, not Adobe support, please do not post personal information] Adobe does NOT do support by email, so beware of answering anyone who sends you a private message-click for more information about scammers https://tinyurl.com/10791730 

Does the free trial of Adobe Premiere Elements 2021 have the same functionality as the full paid version?

Dear all, I have got Adobe Premiere Elements 2020.I also subscribed to Adobe Creative Cloud.But I can't find any tutorial or explanation that confirm that I can use creation from Adobe Effect to Adobe Premiere Elements and how it works.Besides, if it is possible how is it possible to convert the format of the file or project. Hope my request will be understandable enough as I am French.

I am using Premiere Elements 2021 on PC running windows 10. After installing the latest update Premiere Elements 2021 fails to start. Organizer and Photoshop are working fine.The application starts to load the Adobe Premiere Elements Editor workspace then suddenly stops without  warnings.What can I do to resolve this?

How can I create a .srt file (subtitles script) with Premiere Elements 2021 for an edited video?Is it possible?If so, how do I go about making a .srt file for my edited video?Please let me know community.  Thanks for your posts!Sid