Questions

I am in this upgrade/hardware no where land.I stuck trying to do this with Xeon E5-2600  Dell Precision T3600 with Nvidia Quadro 5000 and I7 machine with MSI GTX-970 Gamer 4. I get a notice from Adobe CC when I launch Premiere pro-- that my Quadro 5000 card does not have the latest drivers (R375 U11 377.83--!) Adobe is asking for Quadro Hardware release 21.21.113.77... which i believe is really 377.83  But i cannot tell... i cannot find this version on Nvidia's website. I cannot get GPU rendering for a test project I am trying to do with 8k 60fps video.What i can get is 90+ hour render time for using SOFTWARE CODEC... Yikes!!!I have tried the following :VoukoderCinergy Daniel2And still this mess with Hardware incompatibility and no Hardware GPU rendering. Calvin Ogawa

My PC specs:AMD Threadripper 2990WX - 32 CoreCooler Master Liquid Cooling 64GB RAM CorsairZOTAC 1080Ti GraphicsWindows 10 ProEverything installed on SSD.I convert MOV files to MP4 on regular basis. Conversion started to be a painful task when all of sudden while rendering my machine started freezing. Display goes off and system hangs. I switched my renderer to Software based from CUDA core. It solved the problem but only for a while. Now my machines freeze with display going blank even in software renderer mode. Steps I have taken to resolve:1. Updated the graphics card driver - still crashes - [NO USE]2. Changed the graphics card to other alternate - Still crashes - [NO USE]3. Ran memory test (RAM) - found no error - Still crashes - [NO USE]4. Found my SSD working fine - no problem with SSD too5. Also updated the motherboard BIOS - I am not sure about the relationship with AME - Still Crashes - [NO USE]Nothing logged in Error Logs. I believe system hangs before anything could go into

Hello.I'm a bit stuck and I would appreciate some guidance.I got the following requirements:Format: MXF OP1aCodec: XDCAM HD @ 35 MB 59.94iResolution: 1920X1080Aspect ratio: 16:9The closest I've found is the XDCAMHD 35 NTSC 60i, but that forces a 1440x1080 resolution. The source is 1920x1080.I've tried making a new preset and that doesn't seem to work.

Our DAM requires XDCAM codec in a QT Movie wrapper.  This option is no longer available in AME (or AEFT or PPRO), the versions which did support this are no longer allowed to be used.  This can completely broken our workflow, what solution do we have now?

We're trying to output WebM files with the following specs:1920x1080, WebM (VP8 or VP9), Bitrate 2,000 kbps, (high profile), Max file size 4.0 MB854x480, WebM (VP8 or VP9), Bitrate 700 kbps, (high profile), Max file size 2.0 MB640x360, WebM (VP8 or VP9), Bitrate 360 kbps, (high profile), Max file size 1.0 MBCan AME do this? We're currently looking at 3rd party applications.

Ik zet een video om met metadata naar mp4, maar wat ik ook doe de metadata komen niet mee en het lukt me niet om het xml bestand hierbij te importerenHoe moet ik dit oplossen. Er zit een aparte xml bestand bijMaar ook bij andere bestanden waar de metadata geïncorporeerd is, neemt hij niet mee .

I need to export a video for work as a matter of emergency. It keeps crashing it wont render/encode the video. I have tried about 8 times.It is the first time attempting to render a video on a new computer, it was fine on my old computer which was a way lower spec, I am doing everything the same I think and Its a very powerful brand new 4K editing computer. I am only trying to render a 1080p video 30fps on low render settings! My Computer Specs: AMZ THREADRIPPER 2920X CPU 12 Cores, 3.5 - 4.3GHz 64GB DDR4 2400MHz RAMSamsung Evo 200GB 970 EVO m.2 SSDASUS ROG Strix GeForce RTX 2070 8GB GDDR6 Graphic CardWindows 1010TB HDD2 TB SSHD X24 TB SSHDNot many programs are installed, its a brand new computer. was not running any other programs at the same time. Tried restarting the computer and trying again multiple times. it crashes within a few seconds after pressing Encode/Render button. It begins encoding then crashes. PLEASE HELP!!! Need to render this video by today for work! I am paying a pr

Wonder if anyone or Adobe knows the answer to this.I've captured various screen footage using iShowU Instant... regardless of me trying to conform to 30fps it creates its own adaptive frame rates (28.77 for example).QT has no problem playing this captured footage smoothly. And when imported into AE and used on the timeline (in a project conformed to 30fps) equally I will not see any dropped framesHowever if i try to render to MP4 or ProRes via AME i get brief green dropped frames, presumably its struggling to deal with non uniform frame ratesHowever I can render directly from AE to both ProRes and Animation compressed via the RenderQueue (at 30fps) and will experience no issues with dropped frames?In fact I ended up rendering to animation compressed from RenderQueue and then using AME to re-encode to MP4 and have no dropped frames.Therefore can AME only handle source footage in AE that conforms to a uniform standard frame rate?Cheersps i'm using a Mac and CC2019 etc..Title was edited b

Hello everyone, I create long relaxation videos and I need to stick my clips end to end to make a video of several hours.The passage image is done smoothly but there is a jump in the sound not very acceptable for a relaxing video.I have tried all possible codecs and only the .AVI works well. Except that the quality is very low.I also tried several softwares to join the files but it suggests that it comes from the codec as the result is the same.I leave it to you because I am desperate! I've been on it for several days and my productivity has gone to zeroOf course it is possible to make the video of several hours directly but if I do that I have several days of grinding! What I would like to avoid.Thanks for your help

There are many issues with M.E. 2019, this is specifically in regards to it having severe effects on responsiveness of all other applications when encoding. In my case, it's an AE project. I'm on a 2017 iMac Retina, on Mojave 10.14.4 with 64gb ram and a Radeon Pro 580. I have tried both Open CL and Mercury Metal encoding. No change.I get beachball or just a stuck cursor for 2-3 seconds every 5-6 seconds, making the computer pretty much unusable while encoding. Typing this post took a half hour. Many of my projects use Element 3D, but I have always been able to use M.E. with very little tax on system prior to 2019.I have uninstalled, reinstalled and had multiple updates on both AE and M.E. and wiped preferences, no change. (though it did fix some other problems)In system activity I notice the GPU is almost completely maxed out while the CPU usage and memory usage is almost none.I'm open to work-arounds, but downgrading my AE isn't an option as most of my projects were created in 2019.

so i have a project in premiere that has AE projects work linked into it . the whole thing is mainly the AE ((not rendered)) but i have some cuts/logos imported into the timeline and on that timeline i have like 5 episodes of the same AE template i just change the name and add stuff in Pr with cuts . and when i added to the queue and clicked render i went home and got back today with ONLY 2 of them done and the rest are begin rendered and i noticed that the CPU/GPU are not begin utilized at all ... i tried software only ,cude everything resulted in the same deal no CPU usage. i tried turning off the native project import with no luck.  system specs (not that it matters) are : I9 9900k 64GB ram RTX 2070x2 1TB NVME Samsung 970pro`s (( one for cache and one for the project)

This shows on my preview as I am trying to render from premier pro and it show on my videos after the render has finished. Also, AME will completely crash the PC. Any fixes on this issue?Thanks

Hi everyone, I've been having problems with uploading videos on YouTube. I followed the solution on other post AME 2018 won't stay logged in to Youtube to not use the old preset from AME 2017 but to no avail. Earlier today I tried creating preset in AME and not Premier Pro and I encode 1 min "test" video and I was happy that it was successfully uploaded, so I proceeded to encode the remaining files in my queue.But when I woke up I was disappointed that the other videos that is 45mins-1.5hrs was not uploaded. The error is the same with this post: Publish Error when Exporting video to YouTubePublish Error when Exporting video to YouTube  I just want to point out in the image bellow that the first "test" video is 1min video of the second video from the queue, and I am wonder why was the first one got uploaded successfully and the second one was not, both have the same preset, the only difference between them is the video length/size.Here's the error message:01/13/2018 04:47:48 PM : Y

Hello why i am getting this Error during export?Error compiling VideoExport ErrorError completing render.Writing with export: H.264Writing to file: \\?\D:\123\video.mp4Writing file type: H264Around timecode: 00:01:24:23 - 00:01:34:08     Component: H.264 of type ExporterSelector: 9Error code: -2147483648    This error happens random, it does not care at which time section I render the video.It crashes by small time fragments, lets say i want to render some highlights of my video e.g. <20sek.It does not care which encoder i use: H265 or H264 both crashes. Making the Video longer does help, but not every time. So what can i do?I use Windows 10 Pro with the newest Version of Premier Pro CC. best regards

I have tried exporting an Adobe Premiere file through media encoder 8 times, using both QuickTime and H.264, but each time it fails due to a "GPU rendering error" and not being able to "process frame." My only work around has been to export without media encoder, instead choosing to export through Premiere at 1080pi60 (which is significantly less quality than my footage, but I've been given failure messages for over an hour now). Both Premiere and Media Encoder are the newest 2019 update. How do I fix this so my files export?

Hello!I'll get straight to the point:I own two systems. I do all my video edits on my 12-core Mac Pro.But, because it's the trashcan one, I can't add storage to it, so...I also have a 6-core PC with PLENTY of space, just added an 8TB HDD to it.Here's what I'm trying to do:1- Import video from GoPro HERO 5 and 72- Convert to ProRes 422 Proxy to allow Resolve to edit without stuttering3- On the Mac, pull the files for each video and editNow, here's what I need Media Encoder to do:1- Watch the folder the GoPro videos get dumped in (via GoPro Quik app)2- Automatically convert them, keeping file folder structure, Quik separates them by camera and by date. For example, it'll look like this:W:\IMPORT\2019-05-24\GOPRO HERO 5\filename.mp4W:\IMPORT\2019-05-24\GOPRO HERO 7\filename.mp4I need AME to put them, after conversion, in:W:\IMPORT\OUTPUT\2019-05-24\GOPRO HERO 5\filename.mp4W:\IMPORT\OUTPUT\2019-05-24\GOPRO HERO 7\filename.mp4And son on and so forth...I've gotten as far as adding the watch

Since the CC2019 update, Media Encoder doesn't seem to recognize any HEVC/H.265 video layers exported from After Effects. It just shows up as a color test chart placeholder (see image below). If the video is H.264 then media encoder has no problems.However, if I dynamically link that after effects composition to Premiere first... and then export from Premiere to Media Encoder, it recognizes HEVC video layers. Weird.

Sorry for the "bad" question but how is it possible it's still not possible that you can export a video from PP in a queue without any errors? How are people using this workflow, if at all?If you export a video from PP directly it works (the usual other errors aside), if you send it to AME, the video literally looks completely different, there are fades different or missing, titles are missing, etc.Help?

Hi, How can I go about using my proprietary codec with AME?Specifically, is there a way to develop a plugin so that AME can encode using my codec?Thanks,Eric

This is very annoying. After rendering the file in AME, and changing something in AE, and adding (via drag) the file to AME (even if old was removed from queue), it renders the old file with no changes.You MUST close/open the AME for the changes to take effect. There is NO INDICATION that the old file will be used. Is there any way to prevent this without restarting AME?

Je viens de mettre à jour mon système d’exploitation passant de Mac OS Sierra 10.12.6 à Mojave 10.14.5.Je m’attendais à pouvoir utiliser dans Media Encoder la fonction "Codage Matériel" dans l’onglet Performance, lors du paramétrage de l'encodage. Mais un message d’erreur m’affiche que le matériel de mon ordinateur n’est pas pris en charge. Quel type de matériel faut-il pour pouvoir utiliser le Codage Matériel ?Que désigne le terme matériel exactement ?Merci d'avance pour vos réponses.Title was edited by: Mod

Hi everybody!Is somebody experiencing the same thing?My fan spins like crazy when I do a long and loaded-effects project. Unfortunately I am not able to understand what to tweak or change to solve this issue. Sometimes I am afraid that I'll break my machine if I don't find a solution. In the screenshot I uploaded, you can see what how much power AME is taking in monitor activity if that can help. Also I wrote my machine specs.  Model Identifier: iMac13,1  Processor Name: Intel Core i7  Processor Speed: 3.1GHz  Number of Processors: 1  Total Number of Cores: 4  Memory: 16 GB  Graphics: NVIDIA GeFroce GT 650M 512 MB  Thanks

Bonjour, J'utilise depuis plusieurs années et sans souci Adobe première CS4 pour faire mes montages vidéos avant de les mettre en ligne. Depuis 1 semaine impossible de démarrer Adobe media Encoder, il démarre et se ferme 2 fois de suite puis plus rien. Sans cette opération impossible d'exporter mes montages. J'ai cherché partout sur le net mais je n'ai rien trouvé pour résoudre mon problème.J'ai réinstallé Adobe première pro CS4 mais media encoder se plante systématiquement !Merci de bien vouloir m'aider.Alexandra

I'm trying to make proxies for this doc project (I use the procedure where within Premiere I right click all the footage in the folder and choose "Create proxies")Before, on Premiere and Media Encoder 2018, this was going smoothly, with the proxies being created and attached at a speedy rate.But after being forced to upgrade to 2019 for the client, the performance has plummeted. It now takes 1-3 hours to make a proxy for a single clip when it used to take only a few minutes. It has brought my work and progress to a screeching halt. Below is a screengrab of my system specs.

Hi,Seen similar aspect problems but this seems different.Importing 720x480 vob files.AME (and Premiere) both identify the files as being 540x480 and there does not does not seem to be anyway to change that.The same file imported into HANDBREAK shows the correct aspect ratio. And Windows Properties also identifies it correctly.Any help is appreciated!