Questions

My question is as stated in the title.

https://share.icloud.com/photos/010BcFmYPS-LrX3zIfLMvYzDg

In my Keyboard Shortcuts Presets Pulldown Menu, I can only see "Default (read only) and "Avid Pro Tools (Read Only)". There is no "Custom" so I can customize it. Is this because it's a trial version??

hello I really need help about my files. at that time I just recorded the game and my voice for 4 hours. then my adobe audition after I stopped recording suddenly crashing. I closed the software and reopened my voice was gone. but after I searched for the backup file I only found this file. I don't know what format it is, I changed it to .sesx but it still doesn't work. can anyone help me? Thank you

Everything is fine when recording, then when hit spacebar to listen it's completley off beat about a half of a second behind. It just started out of nowhere and it is beyond frustrating. I'm using a M-Audio air 192 as the Digital input, headphones and mic are hooke dup to the with usb going into the Mac. Did adobe do an update that completley screws you like apple always does?

I have used adobe audition in my church to record preachings and whenever our ministry wants to record. If y'all can see the image I uploaded the purple static wasn't there before. It recently started showing whenever we click record. And all of the sudden whenever we created a new audio file the sound is loud. We have a behringer x32 and also a little board where the audio goes from mixer to pc. The static however still shows up even when the mixer is turned off and we just click record, so it's not the mixer but it has affected the audio.  A while back whenever we started recording it would just show the vertical line indicating the recording seconds but in dark, no purple static was detected with the spectral frequency display. Anybody else has that problem and how to fix. 

I'm really frustrated. The whole point of audition is to record vocals/aduio and edit it. How is it that when I do a multitrack set up, throw in a beat and record my vocals perfectly on beat they're off when I play it back? At first I thought it was me but it's not. I've had a few times in the past where it was PERFECT but other times, like now it's way off. How is it so inconsistant?! I've had better results with Audacity before in terms of just being on beat. I was using MME but anything lower than a 60 latency is jittery and horrible but even at 60 now it's off when before  when i started it was at 200 and it was fine for a bit then it went off so i changed to 60 which fixed it and yet again it's off. I can't go any lower. I tried ASIO but that stupid thing doesn't have an output option so it's not very good for budget friendly set ups since I don't have a way to monitor audition and sometimes when tinkering with the device for ASIO etc it'll bluescreen my pc which is odd bc it

on a freshly install mac silicon ventura 13.6.3 and adobe audition 24.0.3- the splash screen freezes upon opening. Some time it works ok but majority it cant open. I have to force quit to get out and try to reopen it. 

Hello, I would like to ask your help in regards of receiving a contact emai address where I can send a business collaboration proposal with Adobe for Adobe Audition.

Hope I have a simple question, I have a Multitrack Session with 7 tracks, I want to cut (CMD K) a single track, Track 3, and when I select that track in the session and do CMD K it cuts ALL the tracks at that time. What the heck? How can I just cut that single track? I can't figure this one basic step out. Help!

I made this mixtrack a while ago using synths I recorded directly in a synth app on my ipad. Whenever I cut the track, there is a clicking sound at the beginning of each new clip, for example in the photo, there is a clip around 1:31, 1:34, and 1:41. I made this almost a year ago, so rerecording is not an option. I am an amateur when it comes to sound editing, so I don't have an idea of why this is happening. Help? Thanks in advance!

Hi! When I'm editing af project I often have little clips I use often in the same project. It could be a part with clean sound or similar. Can I somehow put these clips in a clipboard or the like, so I can always just drag the clips from there instead of having to find a place in the project where the clip has been used, and then having to manually mark, copy and paste the clip to a new place? Best,Morten

I just bought an ASUS Tuf Gaming laptop and when I connect my mics to it, I get about 30 frames of recording & none of the sound seems to even being from the mic. I've tried it without mics, just the laptop mic. Same problem. 30 frames of audio and then nothing. Tested multiple cables, the connection setup is fine and I downloaded Audacity to test and that worked just fine. Only Audition thinks that it should record 30 seconds from the beyond instead of my VO. Anyone run into this problem?  Oh, it's 32 gigs of ram, a terabyte of storage & a ryzen 7 7735. Any suggestions what else to try? Oh, I've already uninstalled and reinstalled Audition. Attached is a little snippet of the hot action.

I'm not sure if this is the right place to ask, but I'm trying to figure out how to make an audio clip sound like it was recorded in the same environment as another. In the audio file attached, the first line of dialogue ("Susan, can you please stop talking?") was recorded on a more professional microphone.The second line ("I think my ears are gonna bleed.") was through a built-in computer mic in a small bedroom.I'm trying to make the first line of dialogue sound like it was recorded with the same equipment and environment as the second. I've been using various reverb and EQ effects in Audition to make the clips consistent with each other, but I can't get it right. I think I need more experience with reverb and EQ in general.Does anyone have advice on which effects to use or what would help make them sound more consistent? Any help would be appreciated!

Dear friends and developers:  I do heavy-duty multitrack audio mixing. My company is forcing a switch from Vegas to Audition after 15 years with the former program.  I'm looking for 3 functions that would make workflows much easier for everyone, even those who are native to Audition: 1. Currently, zooming in and out on audio requires Ctrl + Scroll Wheel. Why can't it just be the scroll wheel? Why the need to hold down Ctrl? On Vegas, you simply use the wheel to zoom in and out. Which I constantly do. Hoaving to hold down Ctrl AND use the wheel totally unneccesary. Please advise2. When in the "Timeline" tool, you can move around audio clips by right clicking/holding down the mouse. Why can't we do the more intuitive left click/hold? If that's possible to change, please point me to how I can make that switch. 3. In Vegas, I can "ripple" (move an audio clip) and either every clip to the right of that clip in a given track, or every clip to the right of that clip in a p

I created a mutlitrack podcast and uploaded two separate audio files with a host interview track and a guest interview track.  Each sounds great but when I listen to them as multitack I hear a horrible echo.  HELP

I'm currently working on a multi-channel project in Adobe Audition that involves intricate angle panning. However, I've encountered a challenge when trying to rearrange audio files, as the pan settings are attached to the timeline rather than the audio. This makes it difficult to move clips around without disrupting the panning. Is there a way to lock the angle pan to an audio file or any other workaround that would allow for easier clip rearrangement without affecting the pan settings?

Hello, is there any way to change these dropped down menus match the dark mode theme? Also, the application menu bar (the white bar at the top) does not change along with system theme. Is this intentional by design? Thanks in advance for the help.

noise reduction process not wokring on a 1 hour long file I made the noise print, selected the whole file (or nothing), run the process, then i see the effects takes place at the beginning and gradually fades out to around 40 seconds.  more and more of the process degrades over time resulting in no effect after a few seconds. The targetted noise frequences gradually reapear. There are some more topics that mention this problem, but i the bug is not fixed yethttps://community.adobe.com/t5/audition-discussions/audition-cc-noise-capture-noise-reduction-not-applied-to-entire-track/td-p/10066504  

I'm desperate. In Audacity I can easily highlight a section of audio, hit the delete key, and it just takes out the highlighted part like it was never there, leaving the track as one track. In Audition I do the same thing and it takes out the highlighted audio and leaves me two pieces of audio with a gap in the middle. And while I'm here, I have two voices on a stereo track, left and right. I want to be able to edit those independently. There doesn't seem to be a way to do that in Audition. If there is I'd love to know how.  Thanks!

So, my mix DOESN'T have any hiss, but when I export WITH ALL MY EFFECTS ON it adds a pretty distinct constant white noise throughout the song on the mp3 or wav.  My question is... does this sound like an adobe glitch or maybe my processor can't handle all the effects so it's creating noise?   Any help would be appreciated, Thanks!

Hi everyone! I want to record a podcast interview with someone in another location who does not have a studio. I've read some tutorials but don't think I'm getting the gyst of it. I already have 2 podcasts, but only recording my voice. Could someone provide some details on how to do it while achieving the best sound quality? Thanks!

Hello!I'm using the Zoom LiveTrak L-8 with Audition on a new MacBook Pro. The driver is fully installed and the device class is CoreAudio (only option). When opened the mics read just fine under Default Stereo Input. However, I select Mono and tell Audition which channel input to record on each track individually and for some reason, every track does not want to read. I've gotten this to work before and can't figure out what's happening. What setting changed in Audition (or the mixer if you happen to know) that I need to set back to?Thanks for all your help Adobe Community!

When recording an audio file, all my playback is in mono. My Audio Channel Mapping notes my (L) output as mono and I don't know how to change this. A screenshot is attached. How do I get my playback in stereo? I've recorded for years and this all a sudden change is so frustrating! 

Hello, i've been editing an audio file and I was randomly told by the program that I needed to save and restart due to playback issues. I had no other choice so I saved and restarted it. Now after opening it again my file has wave lengths but the spectral frequency display shows me nothing as well as the timer will run but the levels will not register.