Questions

I've converted jpg scans in the past to tif, and opened in CR but that is not happening now. Have checked all the settings. I opened directly in to CR not needing Bridge to do it, besides, there is no right click option to open in Camera Raw instead of PS in Bridge or anywhere.  I scanned to jpg, 1.2GB grayscale file converted to RGB (3x file size) 8bit saved as .tif. Not opening. I've done this before, it was not a problem before. What changed? What am I missing? None of the suggested shortcuts or myriad of ways suggested to open a file in CR work. 

Please allow for the user-defined arrangement of panels in Camera Raw - as well as in Lightroom.It is important to set the White Balance as the first step before using the sliders in the Light panel.The Temp and Tint sliders were until recently at or near the top, a far better position!Recently moving the Temp and Tint sliders into a Color panel and placing that panel below theLight panel is definitely NOT helpful.Rather than simply placing the current Color panel above the Light panel might be a little bit of an improvement over the present, but not nuch. Also, combining Temp, Tint, Vibrance and Saturation into a single panel may seem logical on some level, but it is highly ineffiecent.  A far better idea would be allowing the user to order the panels as desired! Similar to setting one's own Workspace in Photoshop.

My wife is a real estate photographer that shoots in RAW and makes heavy use of the ACR Enhance + Denoise functionality.  (Image sizes = 26MB - 5472 x 3648)The performance of this feature has never been great - But it has gone worse since about 2 weeks ago - It looks like she updated photoshop and all plugins round about the same time.  It currently takes about 2 minutes per image, but we've seen it sometimes take 15 minutes for 2 images. She typically does not process more than 20 images at a time - But even when doing only 5 to 10, the same issue is seen. I haven't tried to downgrade to an earlier version yet, but here are some steps I have tried so far based on other discussions:Photoshop, Camera Raw, NVidia studio drivers - All on latest versionsConfirmed there is no "Acronis Active Protection service" runningDisabled second GPU completely, but also configured NVidia to use High performance GPU for photoshop and sniffer.exeCamera-Raw Tech previews are disab

I'm not sure which is the correct place to post since I access the ACR Filter via Photoshop 2025. So, I posted under the Ps Community initially. Here's a link to the bug/issue that developed on Feb. 14 when I updated to ACR 17.2 & that I reported in that other forum just now:https://community.adobe.com/t5/photoshop-ecosystem-discussions/update-to-latest-acr-rel-17-2-changed-panel-positions-in-unfixable-way/td-p/15158086

Not seeing camera raw 14.5 in my ps filter after restarting and reinstalling. It's supposed to be compatible with my older ps5 version, for my new Canon R100. TIA for any help!

Anyone know of a solution to this?I get this when opening a raw file in photoshop, either by double clicking on file in explorer, or through photoshop's open menu, or when drag and drop file on photoshop. Have to kill photoshop via task manager.If I run camera raw on a second screen (e.g. projector for demo) and then exit camera raw and photoshop, the next time I open a raw file, camera raw uses the now disconnected second screen and photoshop is locked up. Reboot (windows) does not resolve, the only solution seems to be to connect a second screen again and move the camera raw window back onto the first screen. If no second screen is available (e.g. when travelling) then hard luck, no photoshop until you can borrow a screen to move camera raw back.

Hallo. Bis vor kurzem war noch ein KI RAW Profil zu finden. Wo wurde dies hinverschoben?GrüßeAndreas  

Update today to Camera Raw - loaded Bridge to use Camera Raw and can no longer see Geometry Panel

Yesterday I was happy with Photoshop and ACT everyhing worked as it has for ages. I was editing  a RAW file and had a crash to the desktop.Since then ACR and photoshop won't open a RAW file at all. "GPU Acceleration Required - Camera RAW requires graphics processsor acceleration to edit photos." The OFF option is grayed out. If I go to Photoshop prefs. Performance Tab. All is good Card Detected, Tick in Use Graphics Processor but in Camera Raw Settings Performance Tab:  ! "Camera Raw graphics acceleration is not supported by your system!" It was until yesterday!Use Graphics Processor is set to OFF and greyed out.Ive done a clean instal of Photoshop and a clean graphics card driver.Any Ideas what has happened? 

Hi, I'm testing camera raw and would like to connect keyboard shortcuts to a programmable keyboard (Contour Shuttlepro2 or XPpen ACK05).Usually to configure these devices you point to the program executable, but camera raw doesn't have an executable and therefore I can't find a way to set the keyboard shortcuts on the device.Is there a way to fix this and setup cameraraw in these devices?Thanks.

I did post this in the general forum, was advised to bring the question here, for more detailed information: My practice has been to edit a photo, including resizing, then apply sharpening as the last step. Now, I just noticed Camera Raw applies sharpening (default value, 40) before importing into the Photo Editor (Elements '21). WHICH WOULD BE BEST: a) as I have done, let Camera Raw apply its default sharpening, then I again sharpen as last editing step, after resizing; b) set Camera Raw sharpening value to zero (0 - no sharpening), then perform all sharpening as last photo editing step; or, c) Set Camera Raw to a desirable degree of sharpening, and do no more sharpening in Photo Editor ???PLEASE ADVISE In the general forum, I have received this response: Adobe Community Professionalcorrect answer Correct answer by MichelBParisAdobe Community Professional , 16 hours ago@josephunit2nYour question has been discussed widely 10 or 15 years ago by the programmers of ACR them

I have enabled the Distraction Removal feature in ACR, however it appears that this results in the disabling of the Enhance function.  I am attempting to process several old 6MP images from 2004/5 period, and after ebaling the distraction removal function, it ppears that the Enhance function is disabled, and thu you an't use both functions.  Any advice regaring this issue would be appreciated. (I am using Windows 10 with current ACR)

Camera Raw Starting to Super Slow After Tweaking a Photo For Like 1 Minute. Then I have To Close The PS and Run Again To Work. This is Really frustrating. Having This Problem Since Like More Than an Year. File Size is Around 80MB Since They are From A7Riii Camera. Video - https://drive.google.com/file/d/1S3heo3Ri6RqYWzh8Ya39ETDNsoNZfSSG/view?usp=sharingAnd Also Ram Uses Like 80% 90% For No Reason.  Like This Guys' https://community.adobe.com/t5/photoshop-ecosystem-discussions/photoshop-cc-memory-issues-recent-problem/td-p/13746368Tried Resetting The PS & CR Preferenmces But No Help.  My SpecsAMD Ryzen™ 9 5900X GeForce RTX™ 4080 16GB SUPRIM X (Not Studio Driver)Samsung 1TB 990 Pro SSD NVME32GB Ram Its a Shame That This PC Cant Handle This CR  Adobe Photoshop Version: 25.9.1 20240610.r.626 e3aae35 x64Number of Launches: 422Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.22631.3880System architecture: AMD CPU Family:15,

Utilizzando ACR dopo varie selezioni su diversi pannelli l'applicazione rallenta e non si riesce a lavorare. Verificando sul sistema si nota che PS occupa molta RAM (anche oltre quanto riservato in Preferenze) e anche chiudendo e riaprendo l'applicazione appare come se la RAM non venisse rilasciataConfigurazione: AMD Ryzen 9 con Windows 11, 32 GB RAM, scheda video NVIDIA GeForce RTX 4060 8GBIn preferenze è la RAM disponibile a PS è impostata al 60% di RAM (ca. 14GB)

Hi,Pshop 26.2 and raw 17.1.1.  absolute latest.I open a jpg into Camera Raw, file>openas>camera rawI choose mask and paint the entire area then do exposurecreate a second mask paint all over, apply dehazeditto make clarity.open the image and save as .tiffclose the jpg WITHOUT SAVING IT.I can then open it again and see my masks, this is the workaround to pshp failing to save .xmp for non native raw files, such as scans of 35mm negs, slides, flat bed scans etc. perfectly valid rasters since the start of photography. I then open the next image it needs the same conversion,go apply previous settings..AND NOTHING HAPPENS, NO MASKS ARE SHOWN. If I have a load of these images needing same conversion, what the heck does one do to overcome this issue ? since I installed pshop its been one discovery of 'what the heck' after another. Merlin

Hello, I am trying to see how I get the Color Temperature in Camera Raw to reflect the values in Kelvin and not on a 0 scale?  How can I change this?  My mentor shows me his PS Camera Raw and it reflects Color Temp by Kelvin number.. I'd prefer to see mine that same way so I can be precise in my adjustments

Well, this is a weird one. I typically import my photos into Photoshop, which automatically opens Camera RAW. I'm used to using the Denoise control and adjusting the slider to get it just right, and then readjusting if the results aren't what I want. However ... I now get a completely different control, more reminscent of Lightroom, but once I'm selected my amount, and run the denoise, that's it - no changes allowed. HUH?  Other weirdness (and, yes, I'm running the most recent PS version: 26.3.0) is that when I finish with Camera RAW and say Open as object ... it doesn't. I can't go back and redo my edits in Camera RAW. Further, the new remove reflections tool is also missing, and I use that several times a day.  Why would this new, clean install of PS on my new M4 Mac mini give me a poor, older version of Camera RAW? (well, not even older, just ... broken) And, yes, these are the same cr3 files that I've been using all along. It seems to want to give me a new DNG f

Ok, whenever I try to use Camera Raw my computer crashes.For example, I go to the ''presets'' tab, bam, it crashes, I try edit with some masks, bam, it crashes....and yeah, why is my color profile set to Display P3, I havent changed that, I need Adobe RGB to submit to Adobe Stock?This is the second time I see that my color profiles changing in Adobe Camera Raw. Last time it changed to Rec. 2020ACR Version 17.1.0.2100Windows 10 ProThanks for the help fellas.

Hi, Pshop 26.2 and rawcon 17.1.1I have a sky, basically white, then the far hills are cyan, yuk, then nearer hills are darker.If I was in Pshop and having taken the image, pasted it into channels, adjusted contrast then levels to maximise the white/black areas, I can then use that as a selection.In raw mode I made a mask using colour range, turned on white on black view. then not finding such controls as I would use, had to paint out most of the grey areas with a brush which put down black, but the more subtle areas need contrast and levels to black/white them . see attached image. I see no means of doing that. There is no levels or contrast. I drag the black slider and white on black view of mask vanishes. The masking tools seem VERY PRIMITIVE , cannot do correct masking with them.  Used select subject but it selected buildings I had not even told it to, surely it should ask me to click on the subject. Where is magic wand to select the masked area, could do a mask

hello everyone, ı used Apple mac m3 pro, and ps2025 26.3 camera raw 17.1After opening a raw photo with PS, masking operations do not work correctly when the camera is opened in raw. For example, when I say detect background or subject, it shows a fool siily different masking.   The strange thing is that these masks work smoothly in Lightroom. I received remote assistance, they reinstalled and deleted the program many times, my problem could not be solved.    

My husband and I have an issue importing Hasselblad fff files (produced by Hasselblad's Phocus) into Lightroom Classic. We often shoot in a different aspect ratio (1:1, x-pan, etc), which is shown on the rear LCD and in the jpg images. It seems the in-camera aspect ratio chosen (as shot) is not reflected on import into Lightroom Classic. Our Lightroom version is 14.0.1.  This happens for both of us, operating the same Hasselblad camera system and different installations of LRC on 2 Mac Studios.We also have a FUJI system, in which the raw import does show if an alternate in-camera aspect ratio is used.   Finally, if we instead import the 3fr file into LRC, the crop DOES show. However, the 3fr file is much larger (30 to 40% larger) than the fff - so it would be preferable to use the smaller sized fff. I am hoping that this may be a bug that can be fixed so that we can find a workaround while the issue is addressed.  Do you have any recommendations?  I can supply

Hi everyone !I am using Photoshop elements 2021.After editing a RAW file, how can I save it into a JPEG file ? In the left bottom corner, I only have a button called "Aide" (which means "Help"). I have no button called "Save", as I have seen on some youtube help videos.The only format available when I want to save is DNG. Does anyone can help me ?Thnak you in advance. 🙂

Hi,Auto sometimes works, sorts out exposure and colour balance etc.If I draw a mask for the area I want auto to work on, I then dont see an auto expsure button to use !Its not doing anything at all in my image of a wall grasses and a bright sky so I want to apply auto to all but that sky.If I were in photoshop I would reach for levels auto, also a good one to do. or adjustments auto colour.where are any of the autos for when we have masked an area for applying changes to ? I can mess about for ages sliding sliders to and fro, trying to create the average scene from what is one but is incorrectly exposed or has a colour issue etc, grasses and bushes auto should understand. Merlin3

Hi,Could someone please do a step by step on selecting sky and not branches and leaves of trees and grasses on an embankment etc.Sky sounds good until it doesnt get the parts between branches leave and doesnt exclude tall grasses and weedy plants etc  on an embankment etc. I am sure I am not the only one who when having to brush over these bits with a less than wonderful choice of brush sizes at the small end of the choice, is thinking this isnt right. both on brush choice and having to do so at all. Here is mask 1 filter sky and as you can see its not great at the bushes, then create mask 2 luminance and click sky near a bush, better, but how do I then combine the two, I see no means of doing so, dead easy in pshop but raw seems useless at selections and masks compared to what one can do in channels.Am I missing something, I wish to combine the best of these and get a decent sky selection. How is that then done ? Merlin3 

Hi, 2 weeks and still trying to get set up sorted.Having just installed Pshop 26.2 and set up RAW 17.1.1 with 18% grey interface, for correct colour and brightness judgement, having installed Bridge from the Cloud apps that came with the purchase, (as it doesnt do so in the install )I use Bridge to open 4 images at same time into raw, as Pshop wont do so, (wish Adobe fixed that issue, been with us since CS3)but Bridge opens a different raw interface than does Pshop 26.2dark charcoal grey.Should it not be the same raw converter whichever way we come at it ?I will have to alter prefs in it to match those in Pshop route, and if I alter one, then alter it from the Bridge route as well. or does it at least adopt the prefs from when I set them in 26.2 ? It ignored the grey one. and is Lightroom likely to also open a different raw again ? Merlin3